论坛 › 硬件配置 › nvidia驱动问题，help

eveyang 发表于 2003-4-14 16:24:55

nvidia驱动问题，help

下载了nvidia-41.91版驱动，并安装后不能进入x-server
已经安装了匹配的kernel-source
修改后的XF86Config如下：
# File generated by anaconda.

Section "ServerLayout"
        Identifier   "Anaconda Configured"
        Screen      0"Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Mouse1" "SendCoreEvents"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
# The location of the RGB database.Note, this is the name of the
# file minus the extension (like ".txt" or ".db").There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
        RgbPath      "/usr/X11R6/lib/X11/rgb"
        FontPath   "unix/:7100"
EndSection

Section "Module"
        Load"dbe"
        Load"extmod"
        Load"fbdevhw"
#        Load"dri"
        Load"glx"
        Load"record"
        Load"freetype"
        Load"type1"
EndSection

Section "InputDevice"
#        Option        "AutoRepeat"        "500 5"
# when using XQUEUE, comment out the above line, and uncomment the
# following line
#        Option        "Protocol"        "Xqueue"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#        Option        "Xleds"                "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#        Option        "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).For example, for a non-U.S.
# keyboard, you will probably want to use:
#        Option        "XkbModel"        "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#        Option        "XkbModel"        "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#        Option        "XkbLayout"        "de"
# or:
#        Option        "XkbLayout"        "de"
#        Option        "XkbVariant"        "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#        Option        "XkbOptions"        "ctrl:swapcaps"
        #Option        "XkbOptions"        ""
        Identifier"Keyboard0"
        Driver      "keyboard"
        Option          "XkbRules" "xfree86"
        Option          "XkbModel" "pc105"
        Option          "XkbLayout" "us"        #Option        "XkbVariant"        ""
EndSection

Section "InputDevice"
        Identifier"Mouse0"
        Driver      "mouse"
        Option          "Protocol" "IMPS/2"
        Option          "Device" "/dev/psaux"
        Option          "ZAxisMapping" "4 5"
        Option          "Emulate3Buttons" "no"
EndSection

Section "InputDevice"
        Identifier"Mouse1"
        Driver      "mouse"
        Option          "Device" "/dev/input/mice"
        Option          "Protocol" "IMPS/2"
        Option          "Emulate3Buttons" "no"
        Option          "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
        HorizSync    30.0 - 70.0
        VertRefresh50.0 - 160.0
        Option          "dpms"
EndSection

Section "Device"
        # no known options
      #BusID
        Identifier"RIVA TNT2"
        Driver      "nvidia"
        VendorName"RIVA TNT2"
        BoardName   "RIVA TNT2"
   Option "NvAGP" "0"
      
EndSection

Section "Screen"
        Identifier "Screen0"
        Device   "RIVA TNT2"
        Monitor    "Monitor0"
        DefaultDepth   24
        SubSection "Display"
                Depth   24
                Modes    "1024x768" "800x600" "640x480"
        EndSubSection
EndSection

Section "DRI"
        Mode         0666
EndSection

fchunan 发表于 2003-4-14 16:32:24

用xf86config
重新配置一下吧.
我昨天升级后也是这样的.

eveyang 发表于 2003-4-14 18:57:56

你指的重从新配置是什么？从新装驱动后在修改xf86config吗？
我这样都式了好多次了，都不能进入x-server。

查看完整版本: nvidia驱动问题，help