菜鸟编译的问题,请大家多多指教啊..(已初步解决问题)
:lol:我是一个菜鸟哈,刚刚接触到Linux就直奔看Skyeye去了~
但就在第一步的时候就出现了问题!
我用的系统也是Ubuntu7.10,就是在网上Ship来的啊~暂时没有装任何软件,除了小企鹅..
我想问你一下那里面的软件是不是足够来编译skyeye-1.0.0.tar.bz2包里的东西~
我没有装Arm-elf-linux交叉编译器..
按里面的README说明,直接make后出现许多的文字信息(从终端的最下端到最顶端都被写满了,所以有部分的信息没有显示出来),但没有编译成功..下面是能够显示的信息:
___________________________________________________________________________________-
arch/arm/dbct/arm2x86_dp.h: In function ‘gen_op_addl_T1_im’:
arch/arm/dbct/arm2x86_dp.h:35: error: ‘tbpp’ undeclared (first use in this function)
arch/arm/dbct/arm2x86_dp.h:35: error: (Each undeclared identifier is reported only once
arch/arm/dbct/arm2x86_dp.h:35: error: for each function it appears in.)
arch/arm/dbct/arm2x86_dp.h:35: warning: incompatible implicit declaration of built-in function ‘memcpy’
arch/arm/dbct/arm2x86_dp.h:35: error: ‘op_table_t’ has no member named ‘op’
arch/arm/dbct/arm2x86_dp.h:35: error: ‘op_table_t’ has no member named ‘len’
arch/arm/dbct/arm2x86_dp.h:35: error: ‘op_table_t’ has no member named ‘len’
arch/arm/dbct/arm2x86_dp.h:35: error: ‘op_table_t’ has no member named ‘len’
arch/arm/dbct/arm2x86_dp.h:37: warning: incompatible implicit declaration of built-in function ‘memcpy’
In file included from arch/arm/common/armdefs.h:672,
from arch/arm/common/armcopro.c:18:
arch/arm/dbct/arm2x86_movl.h: At top level:
arch/arm/dbct/arm2x86_movl.h:21: error: expected declaration specifiers or ‘...’ before ‘uint8_t’
arch/arm/dbct/arm2x86_movl.h: In function ‘gen_op_movl_Tx_im’:
arch/arm/dbct/arm2x86_movl.h:23: error: ‘tbpp’ undeclared (first use in this function)
arch/arm/dbct/arm2x86_movl.h:23: warning: incompatible implicit declaration of built-in function ‘memcpy’
arch/arm/dbct/arm2x86_movl.h:23: error: ‘struct op_table_s’ has no member named ‘op’
arch/arm/dbct/arm2x86_movl.h:23: error: ‘struct op_table_s’ has no member named ‘len’
arch/arm/dbct/arm2x86_movl.h:23: error: ‘struct op_table_s’ has no member named ‘len’
arch/arm/dbct/arm2x86_movl.h:23: error: ‘struct op_table_s’ has no member named ‘len’
arch/arm/dbct/arm2x86_movl.h:25: warning: incompatible implicit declaration of built-in function ‘memcpy’
arch/arm/dbct/arm2x86_movl.h: At top level:
arch/arm/dbct/arm2x86_movl.h:32: error: expected declaration specifiers or ‘...’ before ‘uint8_t’
arch/arm/dbct/arm2x86_movl.h: In function ‘gen_op_movl_tmpx_im’:
arch/arm/dbct/arm2x86_movl.h:34: error: ‘tbpp’ undeclared (first use in this function)
arch/arm/dbct/arm2x86_movl.h:34: warning: incompatible implicit declaration of built-in function ‘memcpy’
arch/arm/dbct/arm2x86_movl.h:34: error: ‘struct op_table_s’ has no member named ‘op’
arch/arm/dbct/arm2x86_movl.h:34: error: ‘struct op_table_s’ has no member named ‘len’
arch/arm/dbct/arm2x86_movl.h:34: error: ‘struct op_table_s’ has no member named ‘len’
arch/arm/dbct/arm2x86_movl.h:34: error: ‘struct op_table_s’ has no member named ‘len’
arch/arm/dbct/arm2x86_movl.h:36: warning: incompatible implicit declaration of built-in function ‘memcpy’
arch/arm/dbct/arm2x86_movl.h: At top level:
arch/arm/dbct/arm2x86_movl.h:43: error: expected declaration specifiers or ‘...’ before ‘uint8_t’
arch/arm/dbct/arm2x86_movl.h: In function ‘gen_op_movl_Tx_reg’:
....字数太多,这里省略一些以正常发出帖子!
arch/arm/dbct/arm2x86_other.h:114: error: ‘op_table_t’ has no member named ‘op’
arch/arm/dbct/arm2x86_other.h:114: error: ‘op_table_t’ has no member named ‘len’
arch/arm/dbct/arm2x86_other.h:114: error: ‘op_table_t’ has no member named ‘len’
arch/arm/dbct/arm2x86_other.h:114: error: ‘op_table_t’ has no member named ‘len’
arch/arm/dbct/arm2x86_other.h: At top level:
arch/arm/dbct/arm2x86_other.h:119: error: expected declaration specifiers or ‘...’ before ‘uint8_t’
arch/arm/dbct/arm2x86_other.h: In function ‘gen_op_b_offset’:
arch/arm/dbct/arm2x86_other.h:121: error: ‘tbpp’ undeclared (first use in this function)
arch/arm/dbct/arm2x86_other.h:121: warning: incompatible implicit declaration of built-in function ‘memcpy’
arch/arm/dbct/arm2x86_other.h:121: error: ‘op_table_t’ has no member named ‘op’
arch/arm/dbct/arm2x86_other.h:121: error: ‘op_table_t’ has no member named ‘len’
arch/arm/dbct/arm2x86_other.h:121: error: ‘op_table_t’ has no member named ‘len’
arch/arm/dbct/arm2x86_other.h:121: error: ‘op_table_t’ has no member named ‘len’
arch/arm/dbct/arm2x86_other.h:124: warning: incompatible implicit declaration of built-in function ‘memcpy’
arch/arm/dbct/arm2x86_other.h:128: error: ‘ARMul_State’ has no member named ‘trap’
arch/arm/dbct/arm2x86_other.h: At top level:
arch/arm/dbct/arm2x86_other.h:132: error: expected declaration specifiers or ‘...’ before ‘uint8_t’
arch/arm/dbct/arm2x86_other.h: In function ‘gen_op_bl_offset’:
arch/arm/dbct/arm2x86_other.h:134: error: ‘tbpp’ undeclared (first use in this function)
arch/arm/dbct/arm2x86_other.h:134: warning: incompatible implicit declaration of built-in function ‘memcpy’
arch/arm/dbct/arm2x86_other.h:134: error: ‘op_table_t’ has no member named ‘op’
arch/arm/dbct/arm2x86_other.h:134: error: ‘op_table_t’ has no member named ‘len’
arch/arm/dbct/arm2x86_other.h:134: error: ‘op_table_t’ has no member named ‘len’
arch/arm/dbct/arm2x86_other.h:134: error: ‘op_table_t’ has no member named ‘len’
arch/arm/dbct/arm2x86_other.h:137: warning: incompatible implicit declaration of built-in function ‘memcpy’
arch/arm/dbct/arm2x86_other.h:141: error: ‘ARMul_State’ has no member named ‘trap’
In file included from arch/arm/common/armdefs.h:679,
from arch/arm/common/armcopro.c:18:
arch/arm/dbct/arm2x86_coproc.h: At top level:
arch/arm/dbct/arm2x86_coproc.h:13: error: expected declaration specifiers or ‘...’ before ‘uint8_t’
arch/arm/dbct/arm2x86_coproc.h: In function ‘gen_op_add_imm_offset’:
arch/arm/dbct/arm2x86_coproc.h:20: error: ‘tbpp’ undeclared (first use in this function)
arch/arm/dbct/arm2x86_coproc.h:20: warning: passing argument 3 of ‘gen_op_addl_T1_im’ makes integer from pointer without a cast
arch/arm/dbct/arm2x86_coproc.h:20: error: too many arguments to function ‘gen_op_addl_T1_im’
In file included from arch/arm/common/armdefs.h:681,
from arch/arm/common/armcopro.c:18:
arch/arm/dbct/tb.h: At top level:
arch/arm/dbct/tb.h:19: error: expected specifier-qualifier-list before ‘uint8_t’
arch/arm/dbct/tb.h:29: error: expected specifier-qualifier-list before ‘uint8_t’
arch/arm/dbct/tb.h:40: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token
arch/arm/common/armcopro.c: In function ‘XScale_debug_moe’:
arch/arm/common/armcopro.c:1572: warning: incompatible implicit declaration of built-in function ‘printf’
make: *** Error 1
localhost@localdomain:~/src/skyeye/skyeye-1.0.0$
___________________________________________________________________________________
..
请问这是怎么一回事啊?(我想是不是少了一个什么包呢?几乎所有问题都出在arch/arm/dbct下的..)
能不能帮忙看一下呢?
再者有没有什么办法让编译的所有信息都输出到一个文件上来?()
[ 本帖最后由 needming 于 2008-7-22 09:11 编辑 ] make NO_DBCT=1 试试 试过了,呵呵,没有作用..
在网上搜了一下,先下了一个二进制的文件复制进去 了.
这里就顺利贴出来,目前还不清楚这个能不能用..因为现在对Linux还是非常地不熟!
下载一下Skyeyeinsight.tar.bz2,网上说是把它CP到根目录下然后解压就可以,其实不然.
我试过了,没有效果!
再回http://skyeye.sourceforge.net/wiki/um2这里查了一下,还是被我看到了有用的信息:
_____________________________________________________________--网页内容
2.1.1 Linux
Install SkyEye under linux distribution is quite easy. Download binary code of SkyEye , then copy it to /usr/local/bin or other directory. If you like to install from source code,please refer to 8. Compilation from the sources
_____________________________________________________________--网页内容
呵呵,其实我应该想到的,我之前在Cygwin中编译的时候就一次成功了,也是网上的文章说要将生成的Skyeye.exe复制到根目录下的/bin文件中!
在Skyeyyinsight中/bin中的skyeye可执行文件复制到/sur/local/bin下,然后我便试了一下:
root@dmg-ming:/home/dmg/src/skyeye/skyinsight/bin# skyeye -v
***************************************************************
**** ****
**** SkyEyeSimulator Ver 0.8.5 withGDB 5.3 Interface ****
**** ****
***************************************************************
GNU gdb 5.3
Copyright 2002 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB.Type "show warranty" for details.
This SkyEye was configured as "--host=i686-pc-linux-gnu --target=arm-elf".
结果便这样了,呵呵,小弟还有一个问题就是这样可以用Skyeye来仿真了吗?
页:
[1]