求东芝libretto 5宽屏笔记本的配置文件
对BT3比较感兴趣，拿出自己的老本东芝libretto L5，按照网上的高手设置，可以通过grub从硬盘启动，输入用户名和密码之后，无论是xconf，还是startx，都是黑屏，老本配制如下：1280x600 宽屏，ATI 8M的显卡，有高手能帮我做个lzm的启动文件吗？不胜感激！！ 估计和宽屏有关，通过网上查找资料，用gtf 1280 600 60 得到modeline，可是怎么在文本命令下复制以上命令到xorg？ 试试 vesa + 分辨率 800x600 能不能进。估计是驱动的问题。不过 ATI 8M 的显卡应该没有官方驱动可用了。只有 xorg 自带驱动了。 我的显卡是ATI -- Radeon Mobility M6,在linux硬件兼容列表里有，怎样试vesa？在文本命令下说没找到这个命令 在xorg.conf里把driver改成vesa，这东西不是命令。 在xorg.conf里driver已经就是vesa，我这个老本的分辨率是1280x600的 ATI的老卡阿，那把vesa改成ati或者radeon试试吧，顺便把分辨率也指定一下 vesa 应该是不支持宽屏分辨率。而且不支持检测显示器支持的分辨率，必须指定分辨率。 各位高手，我从日本一个网上把配置文件扒下来了，怎么做成lzm文件阿？
Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/X11/CID"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection
Section "Module"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "evdev"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "jp106"
Option "XkbLayout" "jp106"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/psaux"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. Radeon Mobility M6 LY"
Driver "ati"
#Driver "radeon"
#Driver "vesa"
BusID "PCI:0:4:0"
VideoRam 8192
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
#HorizSync 28-49
HorizSync 31.5
#VertRefresh 43-72
VertRefresh 50-61
# 1280x600 for Toshiba Libretto L*
Modeline "1280x600" 60 1280 1328 1512 1712
600601603625
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. Radeon Mobility M6 LY"
Monitor "Generic Monitor"
#DefaultDepth 24
#DefaultDepth 16
DefaultDepth 15
SubSection "Display"
Depth 1
Modes "1280x600" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x600" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x600" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x600" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
#Modes "1280x600" "1024x768" "800x600" "640x480"
#Modes "1280x600" "1024x768"
Modes "1280x600"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x600" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Synaptics Touchpad"
EndSection
Section "DRI"
Mode 0666
EndSection 为什么要做成LZM文件？？直接放到/etc/X11里面去。 估计是用 slax 的。
回复 10# jozhu 的帖子
版主,能不能写个步骤,我刚玩li'nu'x 一个星期,怎么放到/etc/X11里面去? 我只能进命令行,我现在是把配制保存到windows下的txt里了 刚玩一个星期就不要用 slax 。 不想帮忙就算了，琢磨slax又如何？不要当了版主就烧包，把ID砍了吧 slax我没有用过，不知道是怎么个回事，不过正常来说，你只要把以上内容保存为一个叫xorg.conf的文件，然后复制到/etc/X11里就没问题了。
页:
[1]
2