请教：在skyeye-1.2.7_rc1 上启动 u-boot-2009.03（S3C2440）错误
＃＃＃＃＃＃＃ skyeye2440.conf＃＃＃＃＃＃＃#skyeye config file sample
cpu:arm920t
mach: s3c2440
#physical memory
#mem_bank: map=M, type=RW, addr=0x20000000, size=0x01000000
mem_bank: map=M, type=RW, addr=0x30000000, size=0x00800000,file=./u-boot.bin, boot=yes
mem_bank: map=M, type=RW, addr=0x30800000, size=0x00800000
mem_bank: map=M, type=RW, addr=0x31000000, size=0x02f00000
#all peripherals I/O mapping area
#mem_bank: map=I, type=RW, addr=0xfefa0000, size=0x00060000
mem_bank: map=I, type=RW, addr=0x48000000, size=0x20000000
mem_bank: map=I, type=RW, addr=0x19000300, size=0x00000020
#net: type=cs8900a, base=0x19000300, size=0x20,int=9, mac=0:4:3:2:1:f, ethmod=tuntap, hostip=10.0.0.1
lcd:type=s3c2440,mod=gtk
load_addr:base=0x30000000, mask=0xFFFFFF
#dbct:state=on
＃＃＃＃ # gedit board/samsung/ok2440/config.mk＃＃＃＃
#
# (C) Copyright 2002
# Gary Jennejohn, DENX Software Engineering, <[email protected]>
# David Mueller, ELSOFT AG, <[email protected]>
#
# SAMSUNG SMDK2410 board with S3C2410X (ARM920T) cpu
#
# see http://www.samsung.com/ for more information on SAMSUNG
#
#
# SMDK2410 has 1 bank of 64 MB DRAM
#
# 3000'0000 to 3400'0000
#
# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000
# optionally with a ramdisk at 3080'0000
#
# we load ourself to 33F8'0000
#
# download area is 3300'0000
#
TEXT_BASE = 0x31000000
＃＃＃＃＃＃＃ 终端信息＃＃＃＃＃＃＃
# skyeye -c skyeye2440.conf
**************************** WARNING **********************************
If you want to run ELF image, you should use -e option to indicate
your elf-format image filename. Or you only want to run binary image,
you need to set the filename of the image and its entry in skyeye.conf.
***********************************************************************
Your elf file is little endian.
arch: arm
cpu info: armv4, arm920t, 41009200, ff00fff0, 2
mach info: name s3c2440, mach_init addr 0x805d860
lcd_mod:1
Your elf file will be load to: base address=0x30000000,mask=0xffffff
uart_mod:0, desc_in:, desc_out:, converter:
SKYEYE: use arm920t mmu ops
Loaded RAM ./u-boot.bin
start addr is set to 0x30000000 by exec file.
段错误
# ＃＃＃＃＃＃＃ skyeye2440.conf＃＃＃＃＃＃＃
#skyeye config file sample
cpu:arm920t
mach: s3c2440
#physical memory
#mem_bank: map=M, type=RW, addr=0x20000000, size=0x01000000
mem_bank: map=M, type=RW, addr=0x30000000, size=0x00800000
mem_bank: map=M, type=RW, addr=0x30800000, size=0x00800000
mem_bank: map=M, type=RW, addr=0x31000000, size=0x02f00000,file=./u-boot.bin, boot=yes
#all peripherals I/O mapping area
#mem_bank: map=I, type=RW, addr=0xfefa0000, size=0x00060000
mem_bank: map=I, type=RW, addr=0x48000000, size=0x20000000
mem_bank: map=I, type=RW, addr=0x19000300, size=0x00000020
#net: type=cs8900a, base=0x19000300, size=0x20,int=9, mac=0:4:3:2:1:f, ethmod=tuntap, hostip=10.0.0.1
lcd:type=s3c2440,mod=gtk
load_addr:base=0x30000000, mask=0xFFFFFF
#dbct:state=on
错误和上面一样
页:
[1]