回复 15# sejishikong 的帖子
我在网上查了一下，CD光盘不同种类的容量也不一样，刚巧我那个光盘的容量只比镜像文件小5MB左右，所以我才有这个建议，也不是非这样不可。至于用户名密码，我这次试用倒可以不用密码直接root登录，看来是我搞错了。不过还是建议在启动界面上给个提示吧。 我的 HP dx2310MT 安装后没能进入KDE 可以正常启动么？可以进入登录界面还是直接不启动X，如果不能启动X，把/etc/X11/xorg.conf和XF86config删了试试。
这个机器是什么显卡？ 明天试一下
刻盘在haseeA460-i5D2下不能安装 1、MI最后一步确实有可能卡死
2、FireFox启动后再开Terminal时，Terminal界面会在FireFox下。
3、FireFox下载东西后，[右击]--[打开所在文件夹] 或 [打开] 都会出现询问用什么程序来打开文件的提示，这个应该可以在选项中配置。我在这个地方指定了/opt/kde4/bin/dolphin，就可以打开所在文件夹了(应该还有一个应用程序对应列表吧,用指定程序来打开文件的)
配置中没找到。希望下个版本默认配置它。 原帖由 zy_sunshine 于 2010-5-18 21:46 发表 http://www.linuxfans.org/bbs/images/common/back.gif
1、MI最后一步确实有可能卡死
2、FireFox启动后再开Terminal时，Terminal界面会在FireFox下。
3、FireFox下载东西后，[右击]--[打开所在文件夹] 或 [打开] 都会出现询问用什么程序来打开文件的提示，这个应该可以在选项中 ...
hualm说的卡死是在制作initrd这步，按理说这步不应该卡死的，最后一步生成X配置时可能卡死，我见过几回，不过重装一次又好了。
firefox本来想做一些预配置了，不过试了试，感觉不太熟悉，就没有动。 最后一步应该包含 "用户添加"(以及root密码设置) "显卡设置" "鼠标设置" (其实就是"xorg.conf" 设置) 因此重新启动后会因为这些没有配置好用户名密码, 无法直接启动X两个问题，因为没有xorg.conf 所以X是自动识别的。由single模式进去设置用户就可以正常使用 startx
其实也不是什么大问题, 最后一步完全可以忽略掉。
不过initrd 那个地方我没有出现过问题...
<magic.installer>
<group name="install">
<module file="welcome.py"/>
<module file="scsi.py"/>加载scsi驱动
<!--<module file="testops.py"/>-->
<module file="parted.py"/>分区
<module file="bootloader.py"/>grub配置
<module file="pkgselect.py"/> 选择rpm来源
<module file="takeactions.py"/> 安装所有rpm包 并制作initrd
</group>
<group name="setup">
<module file="startsetup.py"/>开始配置
<module file="accounts.py"/>用户账户 root/ 普通用户
<module file="Xwindow.py"/>显卡型号 鼠标型号
<module file="dosetup.py"/>使以上配置信息生效
</group>
<group name="finish">
<module file="finish.py"/>完成重启
</group>
</magic.installer>
不能进KDE的Log文件
X.Org X Server 1.6.5Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30.10-smp i686
Current Operating System: Linux MagicLinux 2.6.30.10-smp #1 SMP Mon Dec 14 12:23:16 CST 2009 i686
Kernel command line: ro root=/dev/sda9 vga=791 quiet splash=silent,fadein,theme:default console=tty1
Build Date: 10 December 200912:36:09PM
Build ID: xorg-x11-server 1.6.5-2mgc25
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue May 18 22:09:11 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Videocard0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "DontZap" "false"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/pcf/zh_CN" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/msttcorefonts".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/msttcorefonts").
(**) FontPath set to:
/usr/lib/X11/fonts/misc:unscaled,
/usr/lib/X11/fonts/75dpi:unscaled,
/usr/lib/X11/fonts/100dpi:unscaled,
/usr/lib/X11/fonts/misc,
/usr/lib/X11/fonts/Type1,
/usr/lib/X11/fonts/cyrillic,
/usr/lib/X11/fonts/TTF,
/usr/share/fonts/default/Type1,
/usr/share/fonts/ttf/zh_CN,
catalogue:/etc/X11/fontpath.d,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(WW) Ignoring unrecognized extension "BackingStore"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0xbe0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0:1:0:0) 10de:0a35:1b0a:2052 nVidia Corporation rev 162, Mem @ 0xf2000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
(II) No APM support in BIOS or kernel
(II) System resource ranges:
-1 0 0xffffffff - 0xffffffff (0x1) MX
-1 0 0x000f0000 - 0x000fffff (0x10000) MX
-1 0 0x000c0000 - 0x000effff (0x30000) MX
-1 0 0x00000000 - 0x0009ffff (0xa0000) MX
-1 0 0xffffffff - 0xffffffff (0x1) MX
-1 0 0x000f0000 - 0x000fffff (0x10000) MX
-1 0 0x000c0000 - 0x000effff (0x30000) MX
-1 0 0x00000000 - 0x0009ffff (0xa0000) MX
-1 0 0xffffffff - 0xffffffff (0x1) MX
-1 0 0x000f0000 - 0x000fffff (0x10000) MX
-1 0 0x000c0000 - 0x000effff (0x30000) MX
-1 0 0x00000000 - 0x0009ffff (0xa0000) MX
-1 0 0xffffffff - 0xffffffff (0x1) MX
-1 0 0x000f0000 - 0x000fffff (0x10000) MX
-1 0 0x000c0000 - 0x000effff (0x30000) MX
-1 0 0x00000000 - 0x0009ffff (0xa0000) MX
-1 0 0xffffffff - 0xffffffff (0x1) MX
-1 0 0x000f0000 - 0x000fffff (0x10000) MX
-1 0 0x000c0000 - 0x000effff (0x30000) MX
-1 0 0x00000000 - 0x0009ffff (0xa0000) MX
-1 0 0xffffffff - 0xffffffff (0x1) MX
-1 0 0x000f0000 - 0x000fffff (0x10000) MX
-1 0 0x000c0000 - 0x000effff (0x30000) MX
-1 0 0x00000000 - 0x0009ffff (0xa0000) MX
-1 0 0xffffffff - 0xffffffff (0x1) MX
-1 0 0x000f0000 - 0x000fffff (0x10000) MX
-1 0 0x000c0000 - 0x000effff (0x30000) MX
-1 0 0x00000000 - 0x0009ffff (0xa0000) MX
-1 0 0x0000ffff - 0x0000ffff (0x1) IX
-1 0 0x00000000 - 0x00000000 (0x1) IX
-1 0 0x0000ffff - 0x0000ffff (0x1) IX
-1 0 0x00000000 - 0x00000000 (0x1) IX
-1 0 0x0000ffff - 0x0000ffff (0x1) IX
-1 0 0x00000000 - 0x00000000 (0x1) IX
-1 0 0x0000ffff - 0x0000ffff (0x1) IX
-1 0 0x00000000 - 0x00000000 (0x1) IX
-1 0 0x0000ffff - 0x0000ffff (0x1) IX
-1 0 0x00000000 - 0x00000000 (0x1) IX
-1 0 0x0000ffff - 0x0000ffff (0x1) IX
-1 0 0x00000000 - 0x00000000 (0x1) IX
-1 0 0x0000ffff - 0x0000ffff (0x1) IX
-1 0 0x00000000 - 0x00000000 (0x1) IX
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux//libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 0.0.2
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
[ 本帖最后由 genuy 于 2010-5-19 06:24 编辑 ]
不能进KDE的Log文件（后面的部分）
(II) Loading extension GLX(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "v4l"
(II) Loading /usr/lib/xorg/modules/drivers//v4l_drv.so
(II) Module v4l: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 0.1.1
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "xtrap"
(WW) Warning, couldn't open module xtrap
(II) UnloadModule: "xtrap"
(EE) Failed to load module "xtrap" (module does not exist, 0)
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 2.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) v4l driver for Video4Linux
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for v4l
(II) resource ranges after probing:
-1 0 0xffffffff - 0xffffffff (0x1) MX
-1 0 0x000f0000 - 0x000fffff (0x10000) MX
-1 0 0x000c0000 - 0x000effff (0x30000) MX
-1 0 0x00000000 - 0x0009ffff (0xa0000) MX
-1 0 0xffffffff - 0xffffffff (0x1) MX
-1 0 0x000f0000 - 0x000fffff (0x10000) MX
-1 0 0x000c0000 - 0x000effff (0x30000) MX
-1 0 0x00000000 - 0x0009ffff (0xa0000) MX
-1 0 0xffffffff - 0xffffffff (0x1) MX
-1 0 0x000f0000 - 0x000fffff (0x10000) MX
-1 0 0x000c0000 - 0x000effff (0x30000) MX
-1 0 0x00000000 - 0x0009ffff (0xa0000) MX
-1 0 0xffffffff - 0xffffffff (0x1) MX
-1 0 0x000f0000 - 0x000fffff (0x10000) MX
-1 0 0x000c0000 - 0x000effff (0x30000) MX
-1 0 0x00000000 - 0x0009ffff (0xa0000) MX
-1 0 0xffffffff - 0xffffffff (0x1) MX
-1 0 0x000f0000 - 0x000fffff (0x10000) MX
-1 0 0x000c0000 - 0x000effff (0x30000) MX
-1 0 0x00000000 - 0x0009ffff (0xa0000) MX
-1 0 0xffffffff - 0xffffffff (0x1) MX
-1 0 0x000f0000 - 0x000fffff (0x10000) MX
-1 0 0x000c0000 - 0x000effff (0x30000) MX
-1 0 0x00000000 - 0x0009ffff (0xa0000) MX
-1 0 0xffffffff - 0xffffffff (0x1) MX
-1 0 0x000f0000 - 0x000fffff (0x10000) MX
-1 0 0x000c0000 - 0x000effff (0x30000) MX
-1 0 0x00000000 - 0x0009ffff (0xa0000) MX
-1 0 0x0000ffff - 0x0000ffff (0x1) IX
-1 0 0x00000000 - 0x00000000 (0x1) IX
-1 0 0x0000ffff - 0x0000ffff (0x1) IX
-1 0 0x00000000 - 0x00000000 (0x1) IX
-1 0 0x0000ffff - 0x0000ffff (0x1) IX
-1 0 0x00000000 - 0x00000000 (0x1) IX
-1 0 0x0000ffff - 0x0000ffff (0x1) IX
-1 0 0x00000000 - 0x00000000 (0x1) IX
-1 0 0x0000ffff - 0x0000ffff (0x1) IX
-1 0 0x00000000 - 0x00000000 (0x1) IX
-1 0 0x0000ffff - 0x0000ffff (0x1) IX
-1 0 0x00000000 - 0x00000000 (0x1) IX
-1 0 0x0000ffff - 0x0000ffff (0x1) IX
-1 0 0x00000000 - 0x00000000 (0x1) IX
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) VESA(0): initializing int10
(II) VESA(0): Bad V_BIOS checksum
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(II) VESA(0): VESA BIOS detected
(II) VESA(0): VESA VBE Version 3.0
(II) VESA(0): VESA VBE Total Mem: 14336 kB
(II) VESA(0): VESA VBE OEM: NVIDIA
(II) VESA(0): VESA VBE OEM Software Rev: 112.22
(II) VESA(0): VESA VBE OEM Vendor: NVIDIA Corporation
(II) VESA(0): VESA VBE OEM Product: GT216 Board - 0695a2b0
(II) VESA(0): VESA VBE OEM Product Rev: Chip Rev
(**) VESA(0): Depth 24, (--) framebuffer bpp 32
(==) VESA(0): RGB weight 888
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) VESA(0): VESA VBE DDC supported
(II) VESA(0): VESA VBE DDC Level none
(II) VESA(0): VESA VBE DDC transfer in appr. 0 sec.
(II) VESA(0): VESA VBE DDC read failed
(II) VESA(0): VESA VBE PanelID read failed
(II) VESA(0): Searching for matching VESA mode(s):
:shock: 中间的Mode省掉了，仅列出一项:shock:
*Mode: 171 (1360x768)
ModeAttributes: 0x3bf
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0008057
BytesPerScanline: 5440
XResolution: 1360
YResolution: 768
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 32
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 1
RedMaskSize: 8
RedFieldPosition: 16
GreenMaskSize: 8
GreenFieldPosition: 8
BlueMaskSize: 8
BlueFieldPosition: 0
RsvdMaskSize: 8
RsvdFieldPosition: 24
DirectColorModeInfo: 0
PhysBasePtr: 0xf1000000
LinBytesPerScanLine: 5440
BnkNumberOfImagePages: 1
LinNumberOfImagePages: 1
LinRedMaskSize: 8
LinRedFieldPosition: 16
LinGreenMaskSize: 8
LinGreenFieldPosition: 8
LinBlueMaskSize: 8
LinBlueFieldPosition: 0
LinRsvdMaskSize: 8
LinRsvdFieldPosition: 24
MaxPixelClock: 229500000
:shock: 中间的Mode省掉了:shock:
(II) VESA(0): Total Memory: 224 64KB banks (14336kB)
(II) VESA(0): Monitor0: Using hsync value of 0.00 kHz
(II) VESA(0): Monitor0: Using vrefresh value of 0.00 Hz
(II) VESA(0): Not using mode "1366x768" (no mode of this name)
(II) VESA(0): Not using built-in mode "1360x768" (no mode of this name)
(II) VESA(0): Not using built-in mode "1360x768" (no mode of this name)
(II) VESA(0): Not using built-in mode "1024x768" (no mode of this name)
(II) VESA(0): Not using built-in mode "800x600" (no mode of this name)
(II) VESA(0): Not using built-in mode "640x480" (no mode of this name)
(II) VESA(0): Not using built-in mode "640x400" (no mode of this name)
(II) VESA(0): Not using built-in mode "320x400" (no mode of this name)
(II) VESA(0): Not using built-in mode "320x240" (no mode of this name)
(II) VESA(0): Not using built-in mode "320x200" (no mode of this name)
(WW) VESA(0): No valid modes left. Trying less strict filter...
(II) VESA(0): Monitor0: Using hsync value of 0.00 kHz
(II) VESA(0): Monitor0: Using vrefresh value of 0.00 Hz
(II) VESA(0): Not using mode "1366x768" (no mode of this name)
(II) VESA(0): Not using built-in mode "1360x768" (illegal horizontal timings)
(II) VESA(0): Not using built-in mode "1360x768" (illegal horizontal timings)
(II) VESA(0): Not using built-in mode "1024x768" (illegal horizontal timings)
(II) VESA(0): Not using built-in mode "800x600" (illegal horizontal timings)
(II) VESA(0): Not using built-in mode "640x480" (illegal horizontal timings)
(II) VESA(0): Not using built-in mode "640x400" (illegal horizontal timings)
(II) VESA(0): Not using built-in mode "320x400" (illegal horizontal timings)
(II) VESA(0): Not using built-in mode "320x240" (illegal horizontal timings)
(II) VESA(0): Not using built-in mode "320x200" (illegal horizontal timings)
(EE) VESA(0): No valid modes
(II) UnloadModule: "vesa"
(II) UnloadModule: "int10"
(II) Unloading /usr/lib/xorg/modules//libint10.so
(II) UnloadModule: "vbe"
(II) Unloading /usr/lib/xorg/modules//libvbe.so
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 本帖最后由 genuy 于 2010-5-19 06:30 编辑 ]
Can't Install from sata(SCSI) CDROM
your Boot Cdrom must IDE刚才输入法不可用
光盘安装时CDROM的接口必须是IDE接口 ，如果是SATA的提示需要SCSI驱动，无法下一步
[ 本帖最后由 genuy 于 2010-5-19 09:26 编辑 ] 楼上帖"/etc/X11/xorg.conf"看看。
删除"/etc/X11/xorg.conf"启动startx试试。 your Boot Cdrom must IDE是什么意思？ 昨晚装了DVD版的，试了试播放mp3，结果kaffeine说找不到文件，smplayer倒是可以播放，但文件名有乱码:(
amarok也播放不了，说什么文件有太多错误云云（没截图），RC2的时候都是正常的。 原帖由 zy_sunshine 于 2010-5-19 08:36 发表 http://www.linuxfans.org/bbs/images/common/back.gif
楼上帖"/etc/X11/xorg.conf"看看。
删除"/etc/X11/xorg.conf"启动startx试试。
试过了无效