intel flash驱动问题！
我在配置文件中增加了Flash的配置mem_bank: map=F, type=RW, addr=0x28000000, size=0x01000000
flash: type=28F128J3A, base=0x28000000, size=0x01000000
在boot运行检测Flash时提示：Flash in current config does not support halfword write at 0x28000000
然后，我到skyeye驱动源码中一看（dev_flash_intel.c），就傻了。如下：
int flash_intel_write_byte (struct device_desc *dev, uint32 addr, uint8 data)
{
int ret = ADDR_HIT;
printf ("\nFlash in current config does not support halfword write at 0x%x", addr);
return ret;
}
int flash_intel_write_halfword (struct device_desc *dev, uint32 addr, uint16 data)
{
int ret = ADDR_HIT;
printf ("\nFlash in current config does not support byte write at 0x%x", addr);
return ret;
}
写byte时提示不支持halfword，写halfword时提示不支持byte！这是什么意思？而且两个写操作没有作任何事！
希望版主解惑，谢谢！
页:
[1]