redhat9+摄像头?如何实现?
我的是redhat9,最近得到一个philips摄像头型号为pcvc720k,想让它工作与redhat9 下不能否实现?能的话情告知方法 好像有个工具的。 install a gnomemeeting.enable usb support in u kernel. ok? yes, then my gnome show my cool pic.:-D
in kernel usb, i choose usb support, uhci support. usb mass storage for my udisk, and ibm (xirlink) support for my camera. u can check ttp://www.linux-usb.org.
u pcvc720k should use ov511 i think. http://www.qbik.ch/usb/devices/index.php is also a good place. let me try...thanks~ :P OV511+ is not for linux driver? i can find ov511 in 2.4.20 kernel.
问
creative pccam 300应该用什么驱动?
在rh8用spca50x的驱动是可以的
但是在rh9下不行
改了源码编译出模块,插入后,打开gnomemeeting就死机。 yes, then my gnome show my cool pic.:-D
in kernel usb, i choose usb support, uhci support. usb mass storage for my udisk, and ibm (xirlink) support for my camera. u can check ttp://www.linux-usb.org.
u pcvc720k should use ov511 i think.
http://www.linux-usb.org连不上 u pc cam 300 should use spca50x.
can u download the one from http://sourceforge.net/projects/spca50x/ and try again? u pc cam 300 should use spca50x.
can u download the one from http://sourceforge.net/projects/spca50x/ and try again?
没有别的驱动了吗?
我在rh8上就用的这个
rh9上在mmap的一些地方有了改动了
是装不上了。
后来我读了mailing list,有人做了改动,可以编译通过
但是只是支持 intel cs110, intel cs430一开始也不支持
现在是否支持我没注意看
modprobe是可以的,但是bu不能用
难道要换一个应用?给推荐一个应用吧。比如gpcam什么的 yes, gpcam is the suggested application. i use gnomemeeting personally.
rh9 seems to bring so many troubles. yes, gpcam is the suggested application. i use gnomemeeting personally.
rh9 seems to bring so many troubles.
上传一个吧,sourceforge下不来。:(
页:
[1]
2