llf9501 发表于 2003-4-29 10:15:43

IBM300GL自带网卡CS8920-CQ问题

已经试了很多方法:
1.使用LINUX自带驱动,不行;
2.下载磁盘操作系统下该网卡驱动,查询IRQ\MEM等信息,甚至装了一遍WIN98查看网卡信息;然后下载LINUX驱动,编译,./BUILD ,INSMOD等,不行;
3.REDHAT不行,换GENTOO......,还是不行;
4.我已经不行了;
5.各位高手还有什么办法教教我,行不行!

Dragonfly 发表于 2003-4-29 10:20:22

but what error? only no such device?
do u read the Documentation/networking/cs89x0.txt ?

llf9501 发表于 2003-4-29 10:51:00

Card 1 'CSC6040:CS8920 Ethernet Adapter' PnP version 1.0 Product version 1.0
Logical device 0 'CSC6040:Unknown'
    Supported registers 0x3
    Device is not active
    Active memory ,0x200
    Resources 0
      Priority preferred
      Port 0x200-0x360, align 0xf, size 0x10, 16-bit address decoding
      IRQ 3,4,5,6,7,2/9,10,11,12,14,15 High-Edge
      Memory 0xc8000-0xf0000, align 0x4000, size 0x4000, expansion ROM, 8-bit
      Memory 0xb0000-0xdc000, align 0x1000, size 0x1000, writeable, 16-bit
以上是/PROC/ISAPNP文件
主要是不能启动网卡,关键是中断和IO等网卡参数,始终不对.

Dragonfly 发表于 2003-4-29 10:59:11

ic, so keep trying. good luck.

llf9501 发表于 2003-4-29 11:08:59

谢谢cheungming :-D

Dragonfly 发表于 2003-4-29 11:12:24

welcome.:wink::-D
页: [1]
查看完整版本: IBM300GL自带网卡CS8920-CQ问题