REDHAT9上ADSL最终解决方案!
REDHAT9上ADSL最终解决方案!在LINUXSIR和LINUXFANS上看了很多关于ADSL的文章,都没有解决我的REDHAT9上ADSL上网的问题,今天实在是没有办法,重新建立连接,曲折的经历,终于上网了(非常激动,可能表达的不是很好),特的写下我的过程,作为参考:
REDHAT默认的PPPOE有问题,需要RPM -E,然后,安装这个
http://www.roaringpenguin.com/pppoe/rp-pppoe-3.5.tar.gz(北南兄推荐)
解压和安装：
#tar zxvf rp-pppoe-3.5.tar.gz
进入解压目录执行
#sh ./go
然后再来设置ADSL。这一处，我们要用命令。
#adsl-setup
Welcome to the Roaring Penguin ADSL client setup. First, I will run
some checks on your system to make sure the PPPoE client is installed
properly...
Looks good! Now, please enter some information:
USER NAME
>>> Enter your PPPoE user name (default XXX): 在这里输入ADSL的用户名
INTERFACE
>>> Enter the Ethernet interface connected to the ADSL modem
For Solaris, this is likely to be something like /dev/hme0.
For Linux, it will be ethn, where 'n' is a number.
(default eth0):如果一张网卡就设置写上eth0
Do you want the link to come up on demand, or stay up continuously?
If you want it to come up on demand, enter the idle time in seconds
after which the link should be dropped. If you want the link to
stay up permanently, enter 'no' (two letters, lower-case.)
NOTE: Demand-activated links do not interact well with dynamic IP
addresses. You may have some problems with demand-activated links.
>>> Enter the demand value (default no):不用写什么
DNS
Please enter the IP address of your ISP's primary DNS server.
If your ISP claims that 'the server will provide DNS addresses',
enter 'server' (all lower-case) here.
If you just press enter, I will assume you know what you are
doing and not modify your DNS setup.
>>> Enter the DNS information here:在这里写上202.96.134.133
下一个DNS是202.96.168.68 //这里根据个人不同可以修改
PASSWORD
>>> Please enter your PPPoE password:输入密码
>>> Please re-enter your PPPoE password:再输入一次
FIREWALLING
Please choose the firewall rules to use. Note that these rules are
very basic. You are strongly encouraged to use a more sophisticated
firewall setup; however, these will provide basic security. If you
are running any servers on your machine, you must choose 'NONE' and
set up firewalling yourself. Otherwise, the firewall rules will deny
access to all standard servers like Web, e-mail, ftp, etc. If you
are using SSH, the rules will block outgoing SSH connections which
allocate a privileged source port.
The firewall choices are:
0 - NONE: This script will not set any firewall rules. You are responsible
for ensuring the security of your machine. You are STRONGLY
recommended to use some kind of firewall rules.
1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation
2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway
for a LAN
>>> Choose a type of firewall (0-2):这里添写为2
** Summary of what you entered **
Ethernet Interface: eth0
User name: XXX
Activate-on-demand: No
DNS: Do not adjust
Firewalling: MASQUERADE
>>> Accept these settings and adjust configuration files (y/n)?
弄完后，就按一个y键。
(以上为北南兄文章里面内容)
不要急于连接,REBOOT -N
然后进入网络设置,设置ETH1固定IP，停止ETH1(我的是用他)
然后ADSL-START
PING 你的DNS,如果可以,那么,恭喜你!
如果不行，REBOOT -N
ADSL-START,这下没问题啦，尽情享受吧！
其中部分内容可能不同,仅作参考,主要在连接后,能够PING通DNS即可! 祝贺！ :mrgreen: 不能用，redhat9的好像有bugs！
翔版，你的那个是默认的吗？ 好! 加精了
继续加油
发表高质量帖子 希望redhat8也可以 发现我的系统里没有gcc，请问怎样补上呢，我是在硬盘里用iso来安装的
sh ./go的时候出现
check gcc ... no 应该可以重新MOUNT，我没有从硬盘安装过，也可以找啊，rpmfind.net 看看这个：
最简单的方法是执行redhat-config-packages --isodir=iso路径(这个路径是指放iso文件的目录,譬如redhat-config-packages --isodir=/mnt/dos/,注意'/mnt/dos/"的后面的"/"),更多的方法及更详细的方法步骤见:
http://www.linuxfans.org/nuke/modules.php?name=Forums&file=viewtopic&t=8408 搞了一个下午,我的9.0也终于可以上了. REDHAT默认的PPPOE有问题？有什么问题？说来听听？
REDHAT9上网设置很方便啊，简单得出乎我的意料啊。只要输入adsl-setup 命令就
可以搞定了，不需要另外什么软件啊。 也许你的是凑合，反正，N多人的有毛病！ :mrgreen: 恭喜！ 看，几乎犯了个大错误！
用SH GOGUI可以编译 :mrgreen: 过去我的redhat9.0也不行，折腾了n次，最后还是用默认的上了 那就把你的过程写出来，看看我们的问题出在那里！