哪里有I2C的补丁呀?
想安装LM_Sensors.看文档说需要I2CRH9自带的内核有,但是官方站点的内核源码没有
那个lm_sensors-2.7.0有没有I2C的补丁呀?我看了半天没明白呀. read this http://home.attbi.com/~ac9410/
for u 2.4.20 u need download 2.4.20-i2c_sensors.tar.gz (262909) and patch one by one. 老大，lm_sensors是什么？我不懂 rh9自带了lm_sensors,配置一下就可以用,无需自己去搞一套 o, i do not have rh9 so do not know. i will try rh9 asap. since most of the problems here are rh9 now. of course that mdk, rh9自带了lm_sensors,配置一下就可以用,无需自己去搞一套
我用的是官方下载的2.4.20内核，编译I2C。而且内核也没有I2C的补丁。sensors-detect通不过。
老大，lm_sensors是什么？我不懂
硬件检测工具
read this http://home.attbi.com/~ac9410/
for u 2.4.20 u need download 2.4.20-i2c_sensors.tar.gz (262909) and patch one by one.
多谢，不行的话我再来问你啊，呵呵 19 December 2002 Official 2.7.0 2.4.20-i2c_sensors.tar.gz (262909)
2.4.20-i2c-1-patch (2898)
2.4.20-i2c-2-patch (61489)
2.4.20-i2c-3-patch (40456)
2.4.20-i2c-4-patch (83110)
2.4.20-i2c-5-patch (29482)
2.4.20-sensors-1-patch (10672)
2.4.20-sensors-2-patch (263251)
2.4.20-sensors-3-patch (895188)
2.4.20-sensors-4-patch (31042)
2.4.20-sensors-5-patch (17250)
这一堆东西是不是都要安装？为什么分了那么多个patch？ yes, install one by one. i do not know why it need so many, hehe. patch是用 -p0 还是 -p1 . 0和1有什么区别呀
没打过补丁,怎么打呀,一般是什么命令?谢谢
most of the time, u can use -p1. u can see man to know the difference of p0 and p1. although it is difficult to understand.
a simple way is go correct dir. for kernel source, u always go linux-2.x.x-x/.
then cat ....patch | patch -p1. or zcat ..patch.gz |patch -p1 where the ..patch and ..patch.gz is u patch file name. 那个sensors是不是就是LM_Sensors呀.打完补丁编译内核的时候已经有 hardware sensors 的选项了.是不是就不需要安装LM_Sensors.了?
cheungming 您给的这个站点是AT&T的?! http://www.lm-sensors.nu 是不是没有I2C的补丁呀?
另外,内核的各种补丁哪里找呀? http://www.kernel.org/ 有吗?
怎么知道主板用的是哪一种监控芯片呀.不要就简单的说看主板. :mrgreen:详悉一点高速我看哪一个芯片. 815EPB主板.多谢!
再恭喜 cheungming 荣升斑主:-D 恭喜恭喜 那个sensors是不是就是LM_Sensors呀.打完补丁编译内核的时候已经有 hardware sensors 的选项了.是不是就不需要安装LM_Sensors.了?
~~~no, even kernel has this, it is still need be installed. at least a newer version or some other difference. i am checking and will tell u the detail difference later.
cheungming 您给的这个站点是AT&T的?! http://www.lm-sensors.nu 是不是没有I2C的补丁呀?
~~~this is a link come from lm-sensors.nu. i guess because the guy writing this uses an att broadband, so have some storage space.
另外,内核的各种补丁哪里找呀? http://www.kernel.org/ 有吗?
~~i remember there is a place list many, i will check. when i find the site url, i will post here. a better way is to subscribe the kernel mailing list. but i am not sure if china has this service.
怎么知道主板用的是哪一种监控芯片呀.不要就简单的说看主板. :mrgreen:详悉一点高速我看哪一个芯片. 815EPB主板.多谢!
~~~~~~~~~c&p from FAQ on that site:
3.2 How do I know which chips I own?
We have an excellent program that scans all your hardware. It is called sensors-detect and is installed in /usr/local/sbin by make install. Just execute this script, and it will tell you.
Chip detection in the drivers is fairly good. That means that it is usually harmless to insert more chip drivers than you need. However, this can still lead to problems, so we do not recommend it.
If sensors-detect didn't find any sensors, either you don't have any, or the ones you have, we don't support. (Look at your motherboard for candidates, then see Help)
so next time, pls read faq carefully, that give u far more info then u can get from here.
再恭喜 cheungming 荣升斑主:
~~~thx a lot. work harder is the only way to thank everybody. 多谢多谢。斑竹真是 舍你其谁:mrgreen:
呵呵，看FAQ的习惯还没养成。以后注意 多谢多谢。斑竹真是 舍你其谁:mrgreen:
呵呵，看FAQ的习惯还没养成。以后注意
u are welcome. faq is worthy reading. that is why it is 'frequently asked questions'.
页:
[1]