SOS:USB鼠标不动
看到同学装Magic linux 1.1,非常棒。可是在我的机器上USB鼠标不能动。
启动时提示
linux/drivers/usb/usb-uhci.o:insmod usb-uhci.o failed
但是
Initializing USB HID interface
Initializing USB mouse
Initializing USB keyboard
进入KDE后,诱人的鼠标图形就在屏幕中央,但就是不动 UP一下,很急 :-( 用setup重新配置一下鼠标.可能是你选错了鼠标型号.不行的话重新启动,让系统再检测一遍. 我充气了好几次,感觉不是鼠标型号选择的问题。
启动的时候报错
/lib/modules/linux-2.4.20/linux/drivers/usb/usb-uhci.o:insmod usb-uhci.o failed 嗯,好像不少人碰到这个问题,是不是新内核的问题? 我的USB鼠标认成了PS/2的标准型,结果可以用! 我的usb鼠标也不能用。 可能这版本内核对部分usb设备支持有问题 你可以重新编译一下内核,把usb support中的usb human interface device support选上,用新内核起动后你先看看/dev/input目录下有没有mice这个文件,如果文件有了的话,再将/etc/X11/XF86Config-4文件中Section "InputDevice"项改为如下的形式:
Section "InputDevice"
Identifier "Mouse0"
Driver "Mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
重新起动X应该就可以了。
good luck! 改了也不行,顶一下,希望下一版本能很好的解决这个问题。 我的也一样 奇怪的是安装时鼠标能用,安装好反而不行了,我的罗技鼠标,用setup选普通usb、罗技、微软智能都不行。 我也碰到过楼主的一摸一样的问题,我的配置一下内核就好了。
内核编译的时候,在 USB组中,USB HIT interface 选上,但其下面的raw hidraw 不要选。
这样就可以了。 下面是我的内核配置:
#USB support
#
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_UHCI=m
CONFIG_USB_UHCI_ALT=m
# CONFIG_USB_OHCI is not set
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_BLUETOOTH is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDDEV is not set
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_DC2XX is not set
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_CATC is not set
# CONFIG_USB_CDCETHER is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_USS720 is not set 能讲一下单独配置内核usb部分的详细过程吗? 我的问题解决了,方法如下:
修改/etc/modules.conf 删除alias usb-controller usb-uhci这行,
保留alias usb-controller usb-ohci行
启动时不再显示上述insmod....的错误,鼠标OK
页:
[1]
2