2.6内核编译成功,启动出错,请各位大大帮忙看看
今天下载主了2.6-test1的内核成功的编译了,但是在启动的时候出错了。屏幕上出现的信息如下:
Boot 'Red Hat Linux (2.6.0-test1)
root (hd0, 0)
Filesystem type is ext2fs , partition type 0x83
Kernel /vmlinuz-2.6.0-test1, ro, root=/dev/hda6
initrd /initrd-2.6.0-test1.img
umcompressing Linux ... OK, booting the kernetl .
然后就死机了。键盘死了,
是怎么回事。哪位大大有试过?
请帮帮忙哟。 Hehe,同我的情况一样,我一直在注意kernel mail-list还没见到报告,不知是不是编译的问题!
我也在kernel mail-list上看来看去就是没有。我也在想是不是编译的问题。
再检查一下看看。 u can try to get a defconfig kernel to see if it works.
at least i tried it on my laptop and pc, no problem.
:-D:-D 请设置如下选项试试:
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
应该可以的,成功了不要忘了谢谢我哟:wink:
我检查了一下配制文件,是这样的呀。 真是奇怪,现在又行了。我怀疑是刚才在设置键盘的时候出了问题了。
可以启动了,就是鼠标有点不习惯。
现在找找nvidia的显卡驱动吧。
Re: 2.6内核编译成功,启动出错,请各位大大帮忙看看
今天下载主了2.6-test1的内核成功的编译了,但是在启动的时候出错了。屏幕上出现的信息如下:
Boot 'Red Hat Linux (2.6.0-test1)
root (hd0, 0)
Filesystem type is ext2fs , partition type 0x83
Kernel /vmlinuz-2.6.0-test1, ro, root=/dev/hda6
initrd /initrd-.img
umcompressing Linux ... OK, booting the kernetl .
然后就死机了。键盘死了,
是怎么回事。哪位大大有试过?
请帮帮忙哟。
我也试了一下2.6.0-test1的内核,第一次启动时确实有这种现象,不过这不是死机,耐心等一下,就会过去了。 hehe, my 2.6 boot smoothly, no pause here.
:-D 我前面也碰到的,将内核中的“文本模式”打开就好了! not all graphic chips support fb, so stick to text mode first My kernel boots well.And I use old config.
there are some new feathers in kernel.but It seem unuseful fo me!
I tnink 2.6.x maybe just strengthen Enterprise apply!
Do you felll some inprovement in desktop apply,as speed in boot ,etc????
And because in 2.6.0-test kernel OSS can't work,so i now just use 2.4.21. that is only a test.
when it is stable. lots of performance data will out.
what i care more is the kernel module programming under new 2.6 kernel. hope to see ldd3 or ulk3 asap.
大侠,大概要等多久啊
大侠,我也停在starting 那里了,不知道要等多久啊,我等了好几分钟了 can u check u config base on previous post about VT? 我打开vt了啊 can u attach u .config file here?
页:
[1]
2