adsl usb modem执行cxstart.sh有错误
# cxstart.sh>>> Inits Conexant AccessRunner <<<
>>> Loading firmware...
Conexant AccessRunner microcode upload program. 24/6/2003
Josep Comas <[email protected]>
Pascal Boucher <[email protected]>
Pawel Konieczny <[email protected]>
I found ADSL modem with VendorID = 0572 & ProductID = cb00
Loading and sending /usr/sbin/cxfirm4.bin...
Firmware is sent!
Setting configuration...
Waiting ADSL line is up (until 90 seconds)...
..........
ADSL line is up (Downstream 1088 Kbits/s, Upstream 576 Kbits/s)
>>> Loading driver...
Launching driver in normal mode...
Using /lib/modules/2.4.20-8/kernel/drivers/usb/cxacru.o
/usr/sbin/cxload.sh successful
Setting RFC1483/2684 routed...
>>> Setting RFC1483/2684 routed <<<
>>> Loading atmarpd...
>>> Activating interface...
SIOCSIFNETMASK: 无法指定被请求的地址
>>> Creating PVC...
usage: /usr/local/sbin/atmarp -a
/usr/local/sbin/atmarp -c [N]
/usr/local/sbin/atmarp -q ip_addr
/usr/local/sbin/atmarp -s ip_addr vpi.vci
/usr/local/sbin/atmarp -s ip_addr atm_addr
/usr/local/sbin/atmarp -d ip_addr
/usr/local/sbin/atmarp -V
上在那个"无法指定被请求的地址"和"PVC"是什么意思呢？还要设置哪些地方才行，现在不能上网，用adsl-setup建立连接后执行adsl-start什么反应都没有，我该怎么办？(系统是RH9，用pppoe拨号)望不惜赐教。
页:
[1]