痛苦--找不到无线网卡的驱动程序
各位高手,我查了很久,发现没有bcm4301芯片(broadcom)的无线驱动程序。Linksys在它的新的无线网卡WMP11 revision 2.7中采用了这种芯片。但是好像linksys和broadcom都没有适合这种芯片的驱动程序。
这是我的系统参数
kernel type:i686
OS Version: release 9(strike)
kernel version: 2.4.20-8
急盼大虾能帮我找一找,我快绝望了! Looks like you are out of luck.This chip is not supported yet.Here's where you can find driver development information for this particular chip.
http://sourceforge.net/projects/linux-bcom4301/
They have yet to release anything yet.:-( 电脑里面只有linux的日子教会我我一件事情就是
你要用不买正版windows软件节约下来的钱用来买
名牌的硬件
这样你就不用为了找不到驱动而烦恼了 请问有没有与我的网卡兼容的驱动程序? 二楼的能否帮助告知哪里找到intersil 2.5 usb芯片的linux驱动?我这里有zyxel的usb网卡,安装不上驱动,真是急人呢? The driver for Intersil Prism 2.5 can be found here
ftp://ftp.linux-wlan.org/pub/linux-wlan-ng/
Read the FAQ thanks,现在我这里还有ATMEL芯片的USB网卡,如何找到他在REDHAT9.0的驱动?先谢了! You have two drivers to choose from.
http://atmelwlandriver.sourceforge.net/downloads.html
http://at76c503a.berlios.de/ thanks!
终于装上了,使用iwconfig及lvnet都有显示内容,
但是如何绑定TCP/IP协议?也就是说如何设定IP地址?请各位大虾帮助指点一下 man iwspy 出错了!WHY
# iwspy
lo Interface doesn't support wireless statistic collection
eth0 Interface doesn't support wireless statistic collection
eth1 Interface doesn't support wireless statistic collection iwspy eth1 + 003000111471 192.168.1.2
Interface doesn't accept reading addresses...
SIOCGIWSPY: Operation not supported # iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
eth1 ATMEL RFMD503AESSID:"WALKLAN"Nickname:"WALKLAN"
Mode:ManagedChannel:1Access Point: 00:30:00:10:84:D3
Bit Rate:11Mb/s
RTS thr=2347 B Fragment thr=2346 B
Encryption key:off
Link Quality:100Signal level:100Noise level:0
Rx invalid nwid:0Rx invalid crypt:0Rx invalid frag:0
Tx excessive retries:0Invalid misc:0 Missed beacon:0 # iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
eth1 ATMEL RFMD503AESSID:"WALKLAN"Nickname:"WALKLAN"
Mode:ManagedChannel:1Access Point: 00:30:00:10:84:D3
Bit Rate:11Mb/s
RTS thr=2347 B Fragment thr=2346 B
Encryption key:off
Link Quality:100Signal level:100Noise level:0
Rx invalid nwid:0Rx invalid crypt:0Rx invalid frag:0
Tx excessive retries:0Invalid misc:0 Missed beacon:0 Which driver did you installed?
页:
[1]
2