zhenrenzhao 发表于 2003-8-27 01:42:21

装了nvidia4363驱动之后字体变了

先前已经用过字体美化包,相当完美
但装了驱动之后,gftp和xmms等等软件的界面字体变得非常难看,这是怎么回事啊,以前的界面字体和其他菜单栏都是一样的,可是现在却变了样
注意菜单栏和下面对话框中的字体,字体间距好像变大了,而且很模糊,另外一些软件也是同样的问题,盼望大侠给以解答,谢谢

dreamboat 发表于 2003-8-27 09:13:03

好象跟驱动没什么关系吧,我装了N 次NVIDIA驱动,没发现什么影响啊,
你看看X的配置文件里 Load "xtt"还在不在?

GNMOE和KDE都是这样?还是各有不同?

zhenrenzhao 发表于 2003-8-27 09:38:28

在kde和gnome下面都有这样的情况,请看,这是没有目录装驱动时的截图

cnhnln 发表于 2003-8-27 23:10:12

什么系统?
XF86config贴上来看看

zhenrenzhao 发表于 2003-8-28 10:09:20

是redhat9的系统,nvidia goforce 2 go 的显卡
用的是
http://www.linuxsir.com/bbs/showthread.php?s=&threadid=30742
的美化

但是上次用公社提供的fontconfig2.0的美化也有同样的情况,这次想换个方法也没用,不知道怎么回事,盼望大侠一定帮忙解决一下,谢谢

这是没有改nvidia的文件,现在各种字体都正常,只要改了,就出现上面的情况了

XF86config如下:
# XFree86 4 configuration created by redhat-config-xfree86

Section "ServerLayout"
        Identifier   "Default Layout"
        Screen      0"Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# RgbPath is the location of the RGB database.Note, this is the name of the
# file minus the extension (like ".txt" or ".db").There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
        RgbPath      "/usr/X11R6/lib/X11/rgb"
        FontPath   "/usr/system/fonts"
        FontPath   "/usr/system/ROfonts"
        FontPath   "unix/:7100"
EndSection

Section "Module"
        Load"dbe"
        Load"extmod"
        Load"fbdevhw"
        Load"glx"
        Load"record"
        Load"freetype"
        Load"xtt"
        Load"type1"
        Load"dri"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#        Option        "Xleds"                "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#        Option        "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).For example, for a non-U.S.
# keyboard, you will probably want to use:
#        Option        "XkbModel"        "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#        Option        "XkbModel"        "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#        Option        "XkbLayout"        "de"
# or:
#        Option        "XkbLayout"        "de"
#        Option        "XkbVariant"        "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#        Option        "XkbOptions"        "ctrl:swapcaps"
# Or if you just want both to be control, use:
#        Option        "XkbOptions"        "ctrl:nocaps"
#
        Identifier"Keyboard0"
        Driver      "keyboard"
        Option          "XkbRules" "xfree86"
        Option          "XkbModel" "pc105"
        Option          "XkbLayout" "us"
EndSection

Section "InputDevice"
        Identifier"Mouse0"
        Driver      "mouse"
        Option          "Protocol" "IMPS/2"
        Option          "Device" "/dev/input/mice"
        Option          "ZAxisMapping" "4 5"
        Option          "Emulate3Buttons" "no"
EndSection

Section "InputDevice"

# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
        Identifier"DevInputMice"
        Driver      "mouse"
        Option          "Protocol" "IMPS/2"
        Option          "Device" "/dev/input/mice"
        Option          "ZAxisMapping" "4 5"
        Option          "Emulate3Buttons" "no"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "Generic Laptop Display Panel 1024x768"
        HorizSync    31.5 - 48.5
        VertRefresh40.0 - 70.0
        Option          "dpms"
EndSection

Section "Device"
        Identifier"Videocard0"
        Driver      "nv"
        VendorName"Videocard vendor"
        BoardName   "nVidia GeForce 2 Go"
        VideoRam    16384
EndSection

Section "Screen"
        Identifier "Screen0"
        Device   "Videocard0"
        Monitor    "Monitor0"
        DefaultDepth   24
        SubSection "Display"
                Depth   24
                Modes    "1024x768" "800x600" "640x480"
        EndSubSection
EndSection

Section "DRI"
        Group      0
        Mode         0666
EndSection

flysail 发表于 2003-8-29 14:12:18

查一下fonts.dir文件是否有改动?
页: [1]
查看完整版本: 装了nvidia4363驱动之后字体变了