兄弟们帮忙看一下:) (关于安装mplayer-0.90pre9的问题)
各位前辈:)小弟目前的操作系统是Mandrake9.0.我在装Mplayer-0.9pre9时遇到了问题.
按照README中的提示以及各位前辈们的贴子,安装还算顺利.
我在KDE终端-konsole中输入"gmplayer"后,界面出现了,当我用右键指定文件位置后,发生错误,提示没有什么(-vo),关闭mplayer后.终端显示如下:
It seems there is no Xvideo support for your video card available.
Run 'xvinfo' to verify its Xv support, and read Xv section of DOCS/video.html!
See 'mylayer -vo help' for other (non-xv) video out drivers.Try -vo x11
Error opening/initializing the selected video_out (-vo) device!
我的显卡是TNT2Pro32M技嘉660-plus
我根据提示输入xvinfo 结果如下
X -Video Extension vesion 2.2
sceen #0
no adaptos pesent
根据README文档,好像应该装上.
麻烦诸位了,那个文件应该从哪里下载,然后怎么装?还是我的显卡根本不支持?
最后一个问题,如果是Geforce2MX,Geforce4MX是不是就可以直接用了,不存在,安装这个文件的问题?
万分感谢!:) 试试用gmplayer -vo x11 or gmlayer -vo sdl方式看能不能启动？
nvidia的显卡只有安装linux驱动才可以完整支持xv模式
真没想到这么快就有回复!
谢谢这么快就有回复.我照着上面的命令做了.MPEG4的可以放了.可是,*.avi和*.asf的文件还是放不了,提示"can't find codec mathing selected -vo and video format the 0x.......(总之就是一串16位数)
MP3也可以放了.
新的问题是,我放了张VCD在光驱里,运行gmplayer后,在窗口点右键,选VCD出现ERROR"audio_setup: can't open audio device /dev/dsp: Device or resource busy.@_@
不好意思再麻烦一次:)
呵呵,还是我.VCD可以放了
呵呵,还是我.VCD可以放了.*.avi & *.asf 文件,还是老问题.第二个问题,无论是VCD还是MPEG4,全屏后中间还是原来大小,周围都是黑色的.这个就叫做全屏么?
小鸟来也!!!
请问MPLAYER都可以播放什么格式的文件啊???MP3也可以??!!! 编辑~/.mplayer/config找到zoom的那一项，改成：
zoom=yes(如果前面有#，别忘了把它去掉)。
MPLAYER可以播放大部分媒体文件，当然包括MP3在内啦：) 还是装上nvidia的驱动用xv模式播放问题少一些。
我刚装完驱动!
刚才我下载了NVIDIA kernel-1.0-.123 Redhar 8.0NVIDIAGLX-1.0-3123 RH速度太慢,没下,请问二着有什么区别?
安装后好像没什么反应.
运行"gmplayer" 后,打开*.AVI文件有声音没图像,*.ASF&*.WMV文件则什么也没有.
现将打开*.AVI文件时屏幕提示如下:
# gmplayer
Using GNU internationalization
Original domain: messages
Original dirname: /usr/share/locale
Current domain: mplayer
Current dirname: /usr/local/share/locale
MPlayer CVS-021102-16:44-3.2 (C) 2000-2002 Arpad Gereoffy (see DOCS)
CPU: Advanced Micro Devices Athlon 4 PM Palomino/Athlon MP Multiprocessor/Athlon XP eXtreme Performance (Family: 6, Stepping: 2)
CPUflags:MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE
Reading config file: /home/gabucino/.mplayer/i_did_not_RTFM_carefully_enough...: No such file or directory
read config file: /root/.mplayer/gui.conf
vo: X11 running at 800x600 with depth 24 and 32 bpp (":0.0" => local display)
Reading /root/.mplayer/codecs.conf: 38 audio & 110 video codecs
Font /usr/local/share/mplayer/font/font.desc loaded successfully! (206 chars)
Using Linux hardware RTC timing (1024Hz)
Input config file /root/.mplayer/input.conf parsed : 50 binds
SKIN dir 1: '/root/.mplayer/Skin'
SKIN dir 2: '/usr/local/share/mplayer/Skin'
Font /usr/local/share/mplayer/font/font.desc loaded successfully! (206 chars)
Font /usr/local/share/mplayer/font/font.desc loaded successfully! (206 chars)
Playing /root/green.avi
Cache fill:0.00% (0 bytes) Detected AVI file format!
VIDEO:352x24024bpp29.97 fps670.0 kbps (81.8 kbyte/s)
==========================================================================
Opening audio decoder: MPEG layer-2, layer-3
AUDIO: 32000 Hz, 2 ch, 16 bit (0x10), ratio: 12000->128000 (96.0 kbit)
Selected audio codec: afm:mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
==========================================================================
Requested video codec family (vfm=ffmpeg) not available (enable it at compilation!)
Requested video codec family (vfm=odivx) not available (enable it at compilation!)
Requested video codec family (vfm=divx4) not available (enable it at compilation!)
Requested video codec family (vfm=dshow) not available (enable it at compilation!)
Requested video codec family (vfm=vfw) not available (enable it at compilation!)
Requested video codec family (vfm=vfw) not available (enable it at compilation!)
*** Try to upgrade /root/.mplayer/codecs.conf from etc/codecs.conf
*** If it still does not work, read DOCS/codecs.html!
Can't find codec matching selected -vo and video format 0x33564944!
==========================================================================
AO: 32000Hz 2ch Signed 16-bit (Little-Endian)
Building audio filter chain for 32000Hz/2ch/16bit -> 32000Hz/2ch/16bit...
Video: no video!!!
Start playing...
A:23.90.7% 70%
Exiting... (Quit)
麻烦各位帮忙看看:
问题1:/home/gabucino/.mplayer/i_did_not_RTFM_carefully_enough...: No such file or directory 中,我并没有发现/HOME/下有这个路径啊.
问题2:*** Try to upgrade /root/.mplayer/codecs.conf from etc/codecs.conf
我亲自,从压缩包里解压缩etc/codecs.conf复制到/root/.mplayer/中了,怎么还有这样的提示?
问题3:这个就是窗口弹出的错误提示:Can't find codec matching selected -vo and video format 0x33564944!
再一次表示感谢^_^ 请参考本版精华区的完美安装帖子,才能获得最完美的效果(播放avi,asf,divx,wma,wmv等等)
再次说明,nvidia的显卡请安装nvidia驱动,否则会有很多奇怪的播放问题
对于问题1:vi ~/.mplayer/config,将最后的相应目录去掉就可以
对于问题2:codecs.conf是根据你系统安装了的解码器,编译过程中自动生成了,不能用源码包里的那个复盖(那个只有很少的解码器设定),安装过程中会自动拷贝过去,不需干预
对于问题3:可能是显卡原因,只能这么说
页:
[1]