violet_mac 发表于 2002-11-4 23:58:17

gmplayer错误

MPlayer 0.90pre9-3.2 (C) 2000-2002 Arpad Gereoffy (看DOCS!)

CPU: Advanced Micro Devices Athlon K7 (Family: 6, Stepping: 2)
CPUflags:MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 0 SSE2: 0
针对有扩展指令集x86 CPU编译: MMX MMX2 3DNow 3DNowEx

read config file: /home/mac/.mplayer/gui.conf
gmplayer: relocation error: gmplayer: undefined symbol: XineramaIsActive

以前pre8是正常的呀
我看了一下，~/.mplayer/下面没有gui.conf，怎么回事？

llc 发表于 2002-11-5 10:07:16

重新编译一次看看,本来应该是程序默认生成的

violet_mac 发表于 2002-11-5 21:21:47

编译了两三次了，都不行。。。
看样子我还是用pre8了

llc 发表于 2002-11-5 21:31:04

enable_audio_equ = 0
vo_driver = "xv"
vo_panscan = 0.000000
vo_doublebuffering = 1
vo_direct_render = 0
v_framedrop = 0
v_flip = 0
v_ni = 0
v_idx = 1
vf_pp = 0
vf_autoq = 0
vf_lavc = 0
vf_fame = 0
ao_driver = "oss"
ao_nosound = 0
ao_volnorm = 0
ao_surround = 1
ao_extra_stereo = 0
ao_extra_stereo_coefficient = 1.000000
ao_delay = 0.000000
ao_oss_mixer = "/dev/mixer"
ao_oss_device = "/dev/dsp"
osd_level = 0
sub_auto_load = 0
sub_unicode = 1
sub_pos = 100
font_factor = 0.750000
font_name = "/mnt/Win-E:/gb2312-ming/gbsn00lp24/font.desc"
cache = 10000
load_fullscreen = 0
gui_skin = "default"
equ_channel_1 = "前右"
equ_channel_2 = "前左"
equ_channel_3 = "后右"
equ_channel_4 = "后左"
equ_channel_5 = "中间"
equ_channel_6 = "低音"
equ_band_00 = 0.000000
equ_band_01 = 0.000000
equ_band_02 = 0.000000
equ_band_03 = 0.000000
equ_band_04 = 0.000000
equ_band_05 = 0.000000
equ_band_06 = 0.000000
equ_band_07 = 0.000000
equ_band_08 = 0.000000
equ_band_09 = 0.000000
equ_band_10 = 0.000000
equ_band_11 = 0.000000
equ_band_12 = 0.000000
equ_band_13 = 0.000000
equ_band_14 = 0.000000
equ_band_15 = 0.000000
equ_band_16 = 0.000000
equ_band_17 = 0.000000
equ_band_18 = 0.000000
equ_band_19 = 0.000000
equ_band_20 = 0.000000
equ_band_21 = 0.000000
equ_band_22 = 0.000000
equ_band_23 = 0.000000
equ_band_24 = 0.000000
equ_band_25 = 0.000000
equ_band_26 = 0.000000
equ_band_27 = 0.000000
equ_band_28 = 0.000000
equ_band_29 = 0.000000
equ_band_30 = 0.000000
equ_band_31 = 0.000000
equ_band_32 = 0.000000
equ_band_33 = 0.000000
equ_band_34 = 0.000000
equ_band_35 = 0.000000
equ_band_36 = 0.000000
equ_band_37 = 0.000000
equ_band_38 = 0.000000
equ_band_39 = 0.000000
equ_band_40 = 0.000000
equ_band_41 = 0.000000
equ_band_42 = 0.000000
equ_band_43 = 0.000000
equ_band_44 = 0.000000
equ_band_45 = 0.000000
equ_band_46 = 0.000000
equ_band_47 = 0.000000
equ_band_48 = 0.000000
equ_band_49 = 0.000000
equ_band_50 = 0.000000
equ_band_51 = 0.000000
equ_band_52 = 0.000000
equ_band_53 = 0.000000
equ_band_54 = 0.000000
equ_band_55 = 0.000000
equ_band_56 = 0.000000
equ_band_57 = 0.000000
equ_band_58 = 0.000000
equ_band_59 = 0.000000



#我的,不能保证在你机器上能用

violet_mac 发表于 2002-11-5 21:50:10

谢谢了
不过似乎和这个gui.conf没有太大的关系，我用你的文件建立gui.conf之后，错误提示仍然和以前一样

llc 发表于 2002-11-5 21:56:30

怪了,你的gcc是多少的?

violet_mac 发表于 2002-11-5 23:54:46

我的GCC:
gcc (GCC) 3.2 (Mandrake Linux 9.0 3.2-1mdk)
Copyright (C) 2002 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.


编译时候是完全正常的，我下载的也是公社提供的压缩包，最让人不解的是，以前pre8是正常的，pre9就不行了。。。

violet_mac 发表于 2002-11-6 00:41:16

我装回了pre8，可以正常使用的。。。郁闷啊！～～～
页: [1]
查看完整版本: gmplayer错误