继续问显卡安装问题。
我安装显卡驱动后X起动很慢，有5分钟以上，怎么办？我的系统：RedHat 9.0
nvidia-4363
XF86Config配置如下：
# XFree86 4 configuration created by redhat-config-xfree86
Section "ServerLayout"
Identifier "Default Layout"
Screen 0"Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "DevInputMice" "AlwaysCore"
EndSection
Section "Files"
# RgbPath is the location of the RGB database.Note, this is the name of the
# file minus the extension (like ".txt" or ".db").There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/system/truetype"
FontPath "/usr/system/ROfonts"
FontPath "unix/:7100"
EndSection
Section "Module"
Load"dbe"
Load"extmod"
Load"fbdevhw"
Load"glx"
Load"record"
Load"freetype"
Load"xtt"
Load"type1"
EndSection
Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier"Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier"Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "InputDevice"
# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
Identifier"DevInputMice"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Philips 104B(14inch/CM1300)"
DisplaySize250 190
HorizSync 30.0 - 54.0
VertRefresh50.0 - 110.0
Option "dpms"
EndSection
Section "Device"
Identifier"Videocard0"
Driver "nvidia"
VendorName"Videocard vendor"
BoardName "NVIDIA GeForce 2 MX (generic)"
Option "NvAGP" "1"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection :oops: 能启动就行了嘛！ 启动用时太久了，不可忍受啊，大家救救了，有没有人遇到这种情况？?闷。。。。。 有这样的情况
不过不是在刚装驱动后，而是偶尔登陆LINUX时会有这样的问题。 我在装驱动之前启动X一直很快，可装完驱动后启动X就象蜗牛，在驱动安装程序的readme文件里也有这样的问题说明，说明里面要求加入参数Option "IgnoreDisplaydevices" 参数就可以解决，但我在Section "drivers" 里加入这行参数，问题依然如故。这段时间好烦。。。。。 自已顶一下。 NVagp 该成 3 试一试
页:
[1]