寒秋 发表于 2003-12-26 12:49:02

2.6.0引导时为何会出现这样的问题？

在装入所有模块后，正常情况下是出现登录窗口，可是却出现如下提示：
INIT: Id "1" respawning too fast: disabled for 5 minutes.
INIT: Id "2" respawning too fast: disabled for 5 minutes.
INIT: Id "3" respawning too fast: disabled for 5 minutes.
INIT: Id "4" respawning too fast: disabled for 5 minutes.
INIT: Id "5" respawning too fast: disabled for 5 minutes.
INIT: Id "6" respawning too fast: disabled for 5 minutes.
然后停了很久，又出现这样的提示。这是什么原因？（模块是已经全部装入了。）

tigerleo 发表于 2003-12-26 14:48:57

Re: 2.6.0引导时为何会出现这样的问题？

在装入所有模块后，正常情况下是出现登录窗口，可是却出现如下提示：
INIT: Id "1" respawning too fast: disabled for 5 minutes.
INIT: Id "2" respawning too fast: disabled for 5 minutes.
INIT: Id "3" respawning too fast: disabled for 5 minutes.
INIT: Id "4" respawning too fast: disabled for 5 minutes.
INIT: Id "5" respawning too fast: disabled for 5 minutes.
INIT: Id "6" respawning too fast: disabled for 5 minutes.
然后停了很久，又出现这样的提示。这是什么原因？（模块是已经全部装入了。）

In most distributions this means that the system is booting by default
into runlevel 5, which is supposed to respawn (re-start again after
it's been exited) a graphical login via xdm, kdm, gdm, or whatever,
and the system can't locate the program.

However, "Id" can also indicate the absence or misconfiguration of
another program, like mingetty, if init tries to respawn itself more
than 10 times in 2 minutes.

Id "x" is the number in the leftmost column of the /etc/inittab file:

# Run gettys in standard runlevels
1:2345:respawn:/sbin/mingetty tty1
2:2345:respawn:/sbin/mingetty tty2
3:2345:respawn:/sbin/mingetty tty3
4:2345:respawn:/sbin/mingetty tty4
5:2345:respawn:/sbin/mingetty tty5
6:2345:respawn:/sbin/mingetty tty6

Commenting the offending line out and then fixing the errant program
and testing on the command line will allow you to see any error
messages that go to standard error output (console) if the errors are
not going to the system log file. Uncomment the line and restart init
with "kill -SIGHUP 1" or "telinit q" to cause init to reinitialize and
reread the /etc/inittab file.

Some systems, however, rewrite /etc/inittab when booting. In that
case, refer to the init man page, and/or the settings in
/etc/sysconfig/init.

Refer to the init and /etc/inittab man pages for detailed information.

漫天飞雪 发表于 2003-12-27 12:48:18

哈哈。我的2.6.0引导时出现：kernel panic: NO init found. Try passing init : option to kernel
谁能告诉我这是什么意思啊？

寒秋 发表于 2003-12-27 13:33:06

编译的时候要记得把ext3格式也编译进去。否则就会出现这样的提示。
第一次引导的时候，我也是出现这样的错误，后来重新进行编译，引导时却是出现了init出错的信息。按照上面的方法，也还是同样的错误。

Joker_cn 发表于 2003-12-27 13:41:42

哈哈。我的2.6.0引导时出现：kernel panic: NO init found. Try passing init : option to kernel
谁能告诉我这是什么意思啊？

add "root=/dev/hdXX" to the grub.conf
页: [1]
查看完整版本: 2.6.0引导时为何会出现这样的问题？