还是usb猫的问题
我用的是全向ql8410大猫。我在linuxsir找到了驱动方法：http://www.linuxsir.org/bbs/showthr...;threadid=41094
我的联结方式ATM LLCSNAP上的桥接IP（RFC1483）。
按照方法，安装后运行cxstart.sh.有一个waiting adsl line up 90秒的连接时间，但90秒过后提示:adsl line down.大猫的cd灯饰一闪一闪的，而不是一直亮。还是上不去网。
还有什么地方没有做对？麻烦高手给我找下原因。多谢!
这个是运行cxstart.sh后的信息，选的是桥接IP（RFC1483）。，什么地方不对那？
用pppoe也不行，出了好多乱码！
# cxstart.sh
>>> Inits Conexant AccessRunner <<<
>>> Loading firmware...
Conexant AccessRunner microcode upload program. 5/5/2003
Josep Comas <[email protected]>
Pascal Boucher <[email protected]>
Compiled for ADSL modem with VendorID = 0572 & ProductID = cafe
ADSL modem found!
Loading and sending /usr/sbin/cxinit.bin...
Firmware is sent!
Firmware version = 2.07
MAC address = 00:07:53:00:0c:64
Waiting ADSL line is up (until 90 seconds)...
.............................................
ADSL line is down
>>> Loading driver...
Launching driver in normal mode...
Using /lib/modules/2.4.20-8/kernel/drivers/usb/cxacru.o
/usr/sbin/cxload.sh successful
Setting RFC1483/2684 bridged...
>>> Setting RFC1483/2684 bridged <<<
>>> Loading br2684 kernel module...
>>> Loading br2684ctl...
Incorrectly built binary which accesses errno, h_errno or _res directly. Needs to be fixed.
RFC1483/2684 bridge: Interface "nas0" created sucessfully
RFC1483/2684 bridge: Communicating over ATM 0.8.81, encapsulation: LLC
RFC1483/2684 bridge: Interface configured
>>> Activating interface...
>>> Adding default route...
>>> Activating send/receive data...
Conexant AccessRunner ioctl call. 5/5/2003
Josep Comas <[email protected]>
Pascal Boucher <[email protected]>
Compiled for ADSL modem with VendorID = 0572 & ProductID = cafe
ADSL modem found!
/usr/sbin/cxnet3up.sh successful
#
页:
[1]