gongcon 发表于 2004-2-1 11:14:56

waiting help for Kernel 2.6.0

I have installed Kernel 2.6.0 for N times, but got no success. The network could not be brought up, and in the boot time, I saw a message that there were a address of 127.0.0.1. How can it be that?

My ifcfg-lo file:
DEVICE=lo
IPADDR=127.0.0.1
NETMASK=255.0.0.0
NETWORK=127.0.0.0
# If you're having problems with gated making 127.0.0.0/8 a martian,
# you can change this to something else (255.255.255.255, for example)
BROADCAST=127.255.255.255
ONBOOT=yes
NAME=loopback

My ifcfg-eth0 file:
DEVICE=eth0
BOOTPROTO=dhcp
IPADDR=192.168.2.202
NETMASK=255.255.255.0
NETWORK=192.168.2.0
BROADCAST=192.168.2.255
ONBOOT=yes
HWADDR=00:00:e2:7e:f7:f7
NEEDHOSTNAME=yes

Experts, Please tell me what's wrong. :shock:

Dragonfly 发表于 2004-2-1 11:17:37

i can only find that u use dhcp. but what is the error message? :-(

imagic 发表于 2004-2-2 13:19:22

don't use dhcp if you want to specify your ip address

gongcon 发表于 2004-2-3 04:20:11

Even I use a static ip -- 192.168.0.100, it still has these messages when I tried to bring up the network.

Error, some other host already uses address 127.0.0.1.
arping:socket:Address family not supported by protocol

Error, some other host already uses address 192.168.0.100.
arping:socket:Address family not supported by protocol

Note: Now my computer doesn't connect to the network yet, so it's imporsible having the ip 192.168.0.100.

gongcon 发表于 2004-2-7 00:23:06

Dragonfly, what do you think about it?

pinper 发表于 2004-2-7 01:24:39

确定网卡的驱动可以正确加载吗？

gongcon 发表于 2004-2-7 14:34:17

I'm sure
页: [1]
查看完整版本: waiting help for Kernel 2.6.0