又是猫的问题！~！~
Dear all,Smart Link Software Modem for Linux.
=========================================================================
* This is an release of Smart Link Linux Modem drivers.
* This release was tested on RedHat-6.2, SuSe 6.4, RedFlag 2.0, and XteamLinux 3.0
distributions.
* This release is provided in "RPM" (standard format for software
package under RedHat, SuSe and the other major Linux distributions).
RPM gives the ability to install the drivers in a standard way.
* This release is built for driver loading on-demand by the operating
system.
HW Pre-Requirements
-------------------
* Mainboard: i810-based.
* Minimum CPU requirement: Intel Pentium 400MHz (or equivalent) or higher.
* Smart Link HAMR5600-based AMR modem.
OS Pre-requirements
-------------------
* RedHat-6.2 distribution (or SuSe 6.4 , XteamLinux 3.0, BluePoint Linux 2.0, RedFlag Linux 2.0 etc.)
* Linux kernel version 2.2.16.
NOTE: This driver was tested only with this kernel, but may also work
with other 2.2.XX versions of the kernel.
Installation
------------
(The "1.00-14" in file names corresponds to the driver version)
1. Install a Smart Link HAMR5600-based AMR modem into the AMR slot.
Restart the machine.
2. Change to the user "root", using the following command:
$ su -
3. If a previous version of this driver was installed on this machine
using RPM, remove it using the following command:
# rpm -e slmdm
4. Compile the drivers, using the following command:
# rpm --rebuild slmdm-1.00.14.src.rpm
This will create slmdm-1.00.14.i386.rpm in the directory:
/usr/src/.../RPMS/... (observe the output, and look for
the "Wrote: ..." line).
This will build the modem drivers for this kernel.
Note: This process requires kernel headers to be present
in the directory '/usr/include/linux' (usually, this is the
default in Linux).
5. Install the drivers, using the following command:
# rpm -i /usr/src/.../RPMS/.../slmdm-1.00.14.i386.rpm
Loading modem
-------------
1. Change to superuser (if you are not already logged in as ):
$ su
2. Change directory to '/usr/local/slmdm':
# cd /usr/local/slmdm
3. Select country you are in. Use a text editor (such as 'vi' or 'emacs'),
open the file 'm.info' and change the following line (number 54):
"CountryName"="CHINA"
Valid country names can be found in the same file, in section
'HomologationParameters'. Default country setting is USA.
4. The drivers are supposed to be loaded "On Demand".
But if it fails you can always load the manually:
As superuser ('root') run the script 'load_slmdm':
# ./load_slmdm
5. After using modem, run unload_slmdm script as superuser ('root'):
# ./unload_slmdm
Using the modem with applications
---------------------------------
Use any modem application (such as 'minicom', 'pppd' or 'chat') as usual.
The modem was tested by us with 'minicom' terminal emulation and 'pppd'
with 'chat' and 'kppp' dialing-up.
NOTE:The document ppp-howto.txt provides a basic instructions
how to configure PPP.
Uninstallation
--------------
To uninstall the modem:
# su -
# rpm -e slmdm
我的是HAMR5603的星片CNR的猫照上面的说名不能装~没有rebuild那个命令
版住啊 我该怎么装啊？？？？
是 你去 http://www.smlink.com
看看有没有相应驱动，我的Smart Link都是在那里找的驱动！ 谢谢老哥这么热心帮我回复 真的很感谢！~
页:
[1]