猫的驱动为zip包，请问怎么安装，应该安在哪个目录下？
我用的是redhat９，安装了里面的全部软件．猫为腾达内猫～ :twisted::twisted::twisted: 是Linux的驱动么？解开ZIP包里面有什么？ 是腾达猫linux版的驱动呀
里面有好多文件
还有好多文件夹，文件名很像我根目录下那些呢
我以为是要把这些文件都放在相应的根目录下呢
可是我发现好象不是应该这么干的．
谢谢你的回复～
工作顺利 那些文件是什么格式的？
列出来看看
帮我看看呀～英文也不好
这是我刚截的图～是这个zip文件解压缩后的http://y365.com/dalianmeinvxuting/liunx/snap1.jpg 下面这是readme的内容
PCTEL Linux PCI driver, version 0.9.2
-------------------------------------
Description
-----------
This package contains the PCTEL driver for various PCTEL modems for linux.
It should run on different kernel-versions and distributions.
Installation
------------
For installation, read INSTALL.
If your installation was succesfull, I would very much like to hear from you.
Please send me:
* kernel version (uname -r)
* distribution (if any)
* modem / chipset / hal
Questions, Infos
----------------
* First of all, please read the FAQ. Please read also the FAQ at
http://sayamindu.topcities.com/pctel.html
* If you have any questions, please ask the linmodems mailing
list. More information about this list: http://www.linmodems.org
If you send questions to me, do not expect an answer. The fastest way is
really to ask on the linmodems mailing list.
Please send the output of the command that did
not work! Do not just describe your problem, copy & paste the output of
your console.
output of the following commands can be helpful:
$ configure
$ make clean
$ make
$ make install
$ insmod pctel
$ insmod ptserial
$ tail /var/log/messages
$ uname -a
Again: do not just write "it did not work", otherwise, we might be unable to help
you and your email will be ignored.
TODO: Give a list of working modems / distros / kernel-versions
---
Jan Stifter, 2002-04-15
[email protected]
http://www.medres.ch/~jstifter/pctel/index.html 总感觉英文不好就不要学计算机 $ configure
$ make clean
$ make
$ make install
$ insmod pctel
$ insmod ptserial
$ tail /var/log/messages
$ uname -a
这是安装步骤 楼上的谢谢了呀～呵呵～
页:
[1]