AS3下3com的3C905-TX网卡不能正常使用
首先：在原来的redhat 9,MDK 9 redflag 4 等待下都可正常驱动的网卡，并现在也可以在WIN下正常使用，型号3com 3C905-tx现在启动后不能PING到网关，查看启动信息如下，大家帮我看一下是什么原因？
PCI: Found IRQ 11 for device 02:01.0
PCI: Sharing IRQ 11 with 00:1f.3
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
See Documentation/networking/vortex.txt
02:01.0: 3Com PCI 3c905 Boomerang 100baseTx at 0xc000. Vers LK1.1.18-ac
00:60:08:9c:34:4c, IRQ 11
product code 4b4b rev 00.0 date 09-24-97
Internal config register is 16302d8, transceivers 0xe040.
8K word-wide RAM 3:5 Rx:Tx split, autoselect/MII interface.
MII transceiver found at address 24, status 786f.
Enabling bus-master transmits and whole-frame receives.
02:01.0: scatter/gather enabled. h/w checksums disabled
divert: allocating divert_blk for eth0
eth0: Dropping NETIF_F_SG since no checksum feature.
divert: freeing divert_blk for eth0
ip_tables: (C) 2000-2002 Netfilter core team
PCI: Found IRQ 11 for device 02:01.0
PCI: Sharing IRQ 11 with 00:1f.3
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
See Documentation/networking/vortex.txt
02:01.0: 3Com PCI 3c905 Boomerang 100baseTx at 0xc000. Vers LK1.1.18-ac
00:60:08:9c:34:4c, IRQ 11
product code 4b4b rev 00.0 date 09-24-97
Internal config register is 102001b, transceivers 0xe040.
64K word-wide RAM 1:1 Rx:Tx split, autoselect/10baseT interface.
Enabling bus-master transmits and whole-frame receives.
02:01.0: scatter/gather enabled. h/w checksums disabled
divert: allocating divert_blk for eth0
eth0: Dropping NETIF_F_SG since no checksum feature.
ip_tables: (C) 2000-2002 Netfilter core team
eth0: Transmit error, Tx status register d0.
Flags; bus-master 1, dirty 1(1) current 1(1)
Transmit list 00000000 vs. cb607240.
0: @cb607200 length 8000002a status 8000002a
1: @cb607240 length 00000000 status 00000000
2: @cb607280 length 00000000 status 00000000
3: @cb6072c0 length 00000000 status 00000000
4: @cb607300 length 00000000 status 00000000
5: @cb607340 length 00000000 status 00000000
6: @cb607380 length 00000000 status 00000000
7: @cb6073c0 length 00000000 status 00000000
8: @cb607400 length 00000000 status 00000000
9: @cb607440 length 00000000 status 00000000
10: @cb607480 length 00000000 status 00000000
11: @cb6074c0 length 00000000 status 00000000
12: @cb607500 length 00000000 status 00000000
13: @cb607540 length 00000000 status 00000000
14: @cb607580 length 00000000 status 00000000
15: @cb6075c0 length 00000000 status 00000000
lp: driver loaded but no devices found
0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-5328 Wed Dec 17 13:54:51 PST 2003
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 149M
agpgart: agpgart: Detected an Intel i815, but could not find the secondary devic e. Assuming a non-integrated video card.
agpgart: Detected Intel i815 chipset
agpgart: AGP aperture is 64M @ 0xd8000000
eth0: Host error, FIFO diagnostic register 2000.
eth0: PCI bus error, bus status 00a00021
在控制台下，还会不停地往出刷下列信息：
eth0: Transmit error, Tx status register d0.
Flags; bus-master 1, dirty 0(0) current 4(4)
Transmit list 0b607240 vs. cb607200.
0: @cb607200 length 8000006e status 0000006e
1: @cb607240 length 8000006e status 0000006e
2: @cb607280 length 8000006e status 0000006e
3: @cb6072c0 length 8000006e status 8000006e
4: @cb607300 length 8000006e status 0000006e
5: @cb607340 length 8000006e status 0000006e
6: @cb607380 length 8000006e status 0000006e
7: @cb6073c0 length 8000006e status 0000006e
8: @cb607400 length 8000006e status 0000006e
9: @cb607440 length 800000ff status 000000ff
10: @cb607480 length 8000006e status 0000006e
11: @cb6074c0 length 8000006e status 0000006e
12: @cb607500 length 8000006e status 0000006e
13: @cb607540 length 8000006e status 0000006e
14: @cb607580 length 8000006e status 0000006e
15: @cb6075c0 length 8000006e status 0000006e
请大家帮忙。
页:
[1]