zhumingfans 发表于 2004-3-21 12:01:52

我的优盘安不上,安装过程那里不对?

# fdisk -l /dev/sd?


Disk /dev/sda: 2 heads, 32 sectors, 1002 cylinders

Units = cylinders of 64 * 512 bytes

   
Device Boot    Start       End    Blocks   IdSystem

/dev/sda1   *         1      1002   32048    4FAT16 <32M



# fdisk -l /dev/sda?


Disk /dev/sda1: 2 heads, 32 sectors, 1001 cylinders

Units = cylinders of 64 * 512 bytes

   
Device Boot    Start       End    Blocks   IdSystem

/dev/sda1p1   ?5397319348560681 1974283273+24NEC DOS
Partition 1 has different physical/logical beginnings (non-Linux?):
   
phys=(598, 2, 10) logical=(53973192, 0, 9)

Partition 1 has different physical/logical endings:
   
phys=(115, 205, 19) logical=(48560680, 0, 27)

Partition 1 does not end on cylinder boundary:
   
phys=(115, 205, 19) should be (115, 1, 32)

/dev/sda1p2   ?372416193864485344903520   73Unknown

Partition 2 has different physical/logical beginnings (non-Linux?):
   
phys=(267, 3, 30) logical=(37241618, 0, 1)

Partition 2 has different physical/logical endings:
   
phys=(704, 7, 12) logical=(38644852, 1, 32)

Partition 2 does not end on cylinder boundary:
   
phys=(704, 7, 12) should be (704, 1, 32)

/dev/sda1p3   ?1986086038028997 581380386+   0Empty

Partition 3 has different physical/logical beginnings (non-Linux?):
   
phys=(722, 0, 3) logical=(19860859, 1, 25)

Partition 3 has different physical/logical endings:
   
phys=(436, 79, 53) logical=(38028996, 1, 29)

Partition 3 does not end on cylinder boundary:
   
phys=(436, 79, 53) should be (436, 1, 32)

/dev/sda1p4   ?         1         1         1   59Unknown

Partition 4 has different physical/logical beginnings (non-Linux?):
   
phys=(83, 32, 32) logical=(0, 0, 1)

Partition 4 has different physical/logical endings:
   
phys=(0, 83, 0) logical=(0, 0, 2)

Partition 4 does not end on cylinder boundary:
   
phys=(0, 83, 0) should be (0, 1, 32)


Partition table entries are not in disk order


# mount -t vfat /dev/sda1 /mnt/usb

mount: wrong fs type, bad option, bad superblock on /dev/sda1,
      
or too many mounted file systems

# mount /dev/sda1 /mnt/usb

mount: you must specify the filesystem type









# mount fdisk -l
Disk /dev/hda: 255 heads, 63 sectors, 1868 cylinders

Units = cylinders of 16065 * 512 bytes

   
Device Boot    Start       End    Blocks   IdSystem
/
dev/hda1   *         1       383   3076416    7HPFS/NTFS

/dev/hda2         384      186811928262+   fWin95 Ext'd (LBA)

/dev/hda5         384       766   3076416    bWin95 FAT32

/dev/hda6         767      1149   3076416    bWin95 FAT32

/dev/hda7          1150      1404   2048256    bWin95 FAT32

/dev/hda8          1405      1410   48163+83Linux

/dev/hda9          1411      1803   3156741   83Linux

/dev/hda10         1804      1868    522081   82Linux swap

A1boyband 发表于 2004-3-21 17:25:46

mkdir /mnt/usb
mount /dev/sd1 /mnt/USB

ljflch 发表于 2004-3-21 19:31:15

mount -t vfat /dev/sda1 /mnt/usb

visionalstar 发表于 2004-3-21 20:01:29

mkdir /mnt/usb
mount /dev/sd1 /mnt/USB
注意大小写
页: [1]
查看完整版本: 我的优盘安不上,安装过程那里不对?