MODEM问题__请LINUX高手指教

early99 发表于 2002-11-25 16:44:07

我装的是RH8,谁可以帮我把我的猫驱动啊????
我的猫是全码(QM-5628D)硬猫!有一个驱动但是(QM-5628)的.也不知道行不行,到现在还没驱动MODEM,敬高手指教!!

吴文官 发表于 2002-11-25 17:19:03

只有试了才知道行不行呀。
我没有这个猫，帮不了你。

monpython 发表于 2002-11-25 17:45:04

去linmodem.org搜索你要的驱动.

monpython 发表于 2002-11-25 17:49:34

http://www.linmodems.org/

Surran 发表于 2002-11-25 19:40:12

Re: MODEM问题__请LINUX高手指教

我装的是RH8,谁可以帮我把我的猫驱动啊????
我的猫是全码(QM-5628D)硬猫!有一个驱动但是(QM-5628)的.也不知道行不行,到现在还没驱动MODEM,敬高手指教!!
先搞清楚是什么芯片的，然后到厂家的网站上去找对应Linux版本的驱动。

ticonderoga 发表于 2002-11-26 09:09:16

Ambient 5628D芯片的，现在被Intel收购了，Intel网站有它的Linux驱动下载。

early99 发表于 2002-11-26 14:16:09

我已经有了驱动，就是make的时候报了错
cc .................................
提示命令没有找到！！

nownow 发表于 2002-11-26 19:34:25

Gcc版本问题！

仔细看看Install

early99 发表于 2002-11-27 12:16:01

我在编译的时候产生两个错误!
好像是说没有 ham.o 和hamcore.o文件，是怎么回事啊？？？

pk 发表于 2002-11-28 02:35:58

intel注页上面有这个芯片的驱动，对应有不同版本的，比如redhat和mandrake，你把驱动解压后，把这两个文件cp到相应的目录便可。

nownow 发表于 2002-11-28 09:51:39

谢谢这位兄弟~~~~~

pk 发表于 2002-11-28 11:42:16

另外INTEL相关猫的下载地址为http://www.intel.com/design/modems/support/drivers_linux.htm

cjy 发表于 2003-1-1 10:42:19

ham 5628 驱动程序中的readme.txt 这样写道：
ReadMe file for the
Intel?MD563X-HaM V.92 chipset Linux driver

contents:
1.License
2.Release Notes
3.Installation
4.File Descriptions
5.International Users
6.Beta Tester appreciation
7.Security issues
8.Compilation issues
a. Instructions for Debian Users
b. Kernel Source
9.What is the Hamregistry?
10. what's v92 and v44?
11. The Hamregistry tool (for persistance)
12. Known Bugs/Issues
13. Comments, ideas, problems, fixes

-------------------------------------------------------------------------------
1. LICENSE

IMPORTANT - read the file "LICENSE.txt" for the INTEL SOFTWARE LICENSE
AGREEMENT BEFORE COPYING, INSTALLING OR USING.

also note:
The serial driver open source code located in the directory "serialdrv"
is work covered under the GNU GENERAL PUBLIC LICENSE (GPL).
The "serialdrv" directory has the GPL in the file "GPL.txt".

-------------------------------------------------------------------------------
2. Release Notes

   This release supports 2.4.x kernels.

   This release is not compatible to 2.2.x kernels, please use
   the 333-5 Linux HaM driver.

   The HaM corecode binary was compiled with gcc version 2.96

   v92 support added:modem on hold AT command set,
   PCM upstream, v44, and quick connect are implemented.

   Linux Compatability tests are performed on the latest or previous
   versions of the following distributions: Mandrake, RedHat, and SuSE

-------------------------------------------------------------------------------
3.INSTALLATION

Prerequisites:
1. root access
2. bash shell to run install scripts
3. a HaM modem
4. KERNEL SOURCE HEADERS FOR THE KERNEL YOU ARE RUNNING
   (found on your distribution's CD)

6 steps to install
1. login as ROOT
2. extract the archive into a directory with "tar -zxvf <archivename>.tgz"
3. cd into the directory it created.
4. Type: make clean
5. Type: make ham
6. Type: make install

The installation script has been designed for the following distributions
release versions

mandrake-release
SuSE-release
redhat-release
debian_version (including Corel)
slackware-version
conectiva-version
bluepoint-release
Unknown distributions install modules and utilities but
will not install boot scripts!.

Please examine the haminst script if you have a different distribution.

The driver is split in two.A ham serial driver and core driver.
The core driver must be loaded first since the serial driver depends on it.
The serial driver registers itself as character device
major number 240, minor number 1.
The serial driver takes one argument right now, which is a number to
override the default major number if you need to.

ATTENTION:if the driver compiles but the script just wont work for you.
Here are the bare minimum steps to get your modem to work.

0.log in as root.
1.insmod -f hamcore.o
2.insmod -f ham.o
2a. you can start "hamregistry" at this point if you wish.
3.rm /dev/ham
4.mknod /dev/ham c 240 1 (note "240" is the default, if it does not
   work see what /proc/devices says ham's major number is)
5.ln -s /dev/ham /dev/modem
6.start a comm application like minicom and use the modem.
7.see section 3 (International Users) for info on setting the correct
   country settings.

-------------------------------------------------------------------------------
4.FILE DESCRIPTIONS

haminst installation script to install HaM modules and supporting files

files copied to /lib/modules/(kernel-version)/misc
hamcore.o driver core code module
ham.o pseudo serial driver for HaM, depends on hamcore.o

files copied to/etc/rc.d/...(path differes per distribution)
hamboot boot scrip to start and stop HaM modules

files copied to /usr/sbin
hamregistry hamregistry is the "registry" like tool that the modem uses to
get and store persistant data such as county info and profile strings.

files copied to /etc
hamregistry.bin file that stores the initial persistant data for modem.

-------------------------------------------------------------------------------
5.INTERNATIONAL USERS

hamregistry will store the last country setting you
set in the modem.

in minicom (or equivalent comm application)
the commmand to change country setting is "AT+GCI="
the command takes a t.35 country code in hexadecimal.
below is a list of currently supported t.35 country codes.
you can also put this "AT" command in the init string of
the comm application you are using.

if you are a CTR-21 country I think you should be able to
choose a CTR-21 country on the list and be ok.but
that's no guarantee.
The same goes for countries that are "USA" compatable.
(this table also exist in the source file wwh_dflt.c that
ships with the hamcore driver)

countrycode t.35 code
---------------------------
USA    1    B5
KOR    82 61
ECU    593 35
BOL    591 14
CHL    56 15
COL    57 27
PAN    507 85
PER    51 88
SAU    966 98
THA    66 A9
VNM    84 BC
SWE    46 A5
DNK    45 31
FIN    358 3C
NOR    47 82
ISL    354 52
IRL    353 57
ISR    972 58
LIE    423 68
ESP    34 A0
TUR    90 AE
DEU    49 42
AUT    43 0A
CHE    41 A6
CYP    357 2D
GRC    30 46
ITA    39 59
LUX    352 69
NLD    31 7B
GBR    44 B4
BEL    32 0F
FRA    33 3D
PRT    351 8B
PAK    92 84
JPN    81 00
RUS    7    B8
AUS    61 09
MYS    60 6C
CHN    86 26
HKG    852 50
SGP    65 9C
NZL    64 7E
ARG    54 07
BRA    55 16
MEX    52 73
TWN    886 E3
IND    91 53
PHL    63 89
IDN    62 54
BHS    103 0B
BRB    104 0E
BMU    105 12
GTM    502 49
HTI    509 4E
HND    504 4F
JAM    1    5B
NIC    505 7F
PRY    595 87
PRI    121 8C
SUR    597 A3
TTO    117 AC
URY    598 B7
VEN    58 BB
ZWE    263 C4
GUY    592 4D
EST    372 E0
HUN    36 51
SVN    386 E2
ARE    971 B3
SVK    421 2E
CAN    107 14
CRI    506 1B
DOM    110 33
SLV    503 37
GMB    220 41
GIB    350 45
POL    48 8A
EGY    20 36
CZE    420 2E
ZAF    27 9F
GUF    594 E1

-------------------------------------------------------------------------------
6.Thanks to the following beta testers for their valuable input and
suggestions during the HaM 333 beta test between January 2 - 26, 2001

Dorian S. Araneda
Sean Walbran
Rob Clark
Marvin Stodolsky
Dominique Duval
Roman Krais
Ulrich Guenther
Marcelino Viana Pinheiro
Thomas S. Iversen
Jospeh Teichman
Michel Bartolone (MED)
Ramon Gonzalez Montoiro
Ryoji Kawagishi
Torsten Vogel
"jandro"
Ian Carr-de Avelon
Helga Weindl
Ed Casas
Bernhard Hoelcker
Alexander "Sasha" Voytov
Albert Woo
Peter Hirschmann

and all of the helpful Linux HaM users
around the world and at www.linmodems.org

-------------------------------------------------------------------------------
7. Security issues

the haminst and hamboot file install the files and device nodes as
root for the owner and group.
this will cause problems for those who want to user the modem to dialout
using an account other than root.

In SuSE, "dialout" is the group used to install the files and device node.
This way, anyone belonging to the "dialout" group can use the modem to dialout.
(take a look at /etc/group)

I did not want the script to allow full access of the modem to everyone without
"root" knowing.

Edit the hamboot and haminst scripts to fit your needs.

-------------------------------------------------------------------------------
8. Compile issues
a. this driver will now compile with the this path:
/lib/modules/<kernel version>/build/include
the 2.4.4+ kernels says to copy the /boot/vmlinuz.version.h
over to the kernel build path.I have the makefile do this
if this file exists.You must install the kernel source
code anyways.It should be on your distribution's CD.

-------------------------------------------------------------------------------
9.What is the Hamregistry?
The hamregistery is an application that stores data for the ham driver onto
the disk.hamregistry stores information from the driver that needs to
persist from reboot to reboot such as you current country setting.
   The haminst install script and the hamboot script start this utility
   automatically for you.
If this tool is not present when the driver gets used your profile,
quickconnect, and current country setting will not be saved but the driver
should still work fine. The only step that would need to be done is to
make sure that the driver is set to the correct country with
at+gci= (see section 5)

-------------------------------------------------------------------------------
10. What's v92 and v44?

a. modem on hold: (ISP and your ISP dialer must also support this)
   This will allow you to pause your ppp connection to answer an incoming
   call. You will need call waiting, dialer, and ISP support for this to
   work.When you are done with the call you can resume your ppp connection
   without having to reconnect.The AT command set for this feature exist
   in the driver.

b, pcm upstream:
   (ISP must also support this, as of version 4.32 I
   dont know any ISP's that do)
   This will allow faster upload speeds.
   to enable: at+pig=0
   to disable: at+pig=1

c. quickconnect:
   Once you make a call to a v92 modem, your phoneline characteristics are
   stored.Whenever you make a new v92 connection it will use this data
   to make the call negotiationquicker (approx 10 seconds).
   to enable: at+pqc=0at+pss=0
   to disable: at+pss=2

d. v44: (ISP must also support this)
   A better compression protocol than v42 which can give you better transfer
   speeds.

-------------------------------------------------------------------------------
11. The Hamregistry tool

The hamregistry tool is used to provide persistance of settings across
reboots.The haminst and hamboot scripts automatically setup and start
the hamregistry background task for the modem to use.
The hamregistry tool has command line arguments for those who wish to
customize persistant settings.To use these command lines
you must first stop the driver with "bash hamboot stop".
Once the driver has been stopped you may run hamregistry with one of these
arguments to store into the /etc/hamregistry.bin persistance file:
(supply value for items in < >)
   -mfg <Modem manufactures name>
   -mod <Modem model name>
   -hookflash<0,1,2>
   hookflash method:0=(default)without tone1=with tone2=reserved
   -v92rptopt<0,1>
   control v92 reporting: 0=PCM upsteam only    1=(default) all v92
   -gpio_lpohd <0,1>
   Handset Hook detection:0=not supported       1=(default)supported
   -currentcountry <t.35 code>

This info is written to the /etc/hamregistry.bin file.
If hamregistry.bin exists along with the installation files, haminst will
copy it to /etc/hamregistry.bin when installing the modem.

-------------------------------------------------------------------------------
12. Known Bugs/Issues

a. If you see this message
   "ham:rs_open: DSP did not reset. try again or restart computer"
   and you KNOW you have a HaM modem installed
   Disable "PNP OS" in your bios.There is a problem with the driver and
   linux PNP.After a time, Linux PNP will disable the card and the driver
   currently can not reenable itself.
b. Be aware that the build replaces your
   /lib/module/<kernver>//build/include/linux/version.h file with
   /boot/vmlinuz.version.h
   (this is what Linus T. told me to do with a compiler error)
c. There may be an incompatibility with DevFS. The ham device may be located
   in /dev/tts/ham
   instead of /dev/ham.Be aware of this and link /dev/modem to the ham
   device that corresponds to your setup.
d. SuSE 7.3 has our 412-3HaM driver on the CD set.
   To install it the command is:
   rpm -Uhv /cdrom/suse/pay1/Intel-v92ham.rpm
f. There is a compile problem with HaM version 4.25 and SuSe 7.2
   remove our comment the line "#define EXPORT_SYMTAB"for it to compile.
e. Incase you are having problems making a ppp connection try using wvidal
   with this information below. execute the script and it will have wvdial
   make the ppp connection

------my script----------------------
#! /bin/sh
/usr/sbin/pppd -detach lock asyncmap 00000000 \
   defaultroute debug /dev/modem 57600 \
   ipparam ppp0 linkname ppp0 \
   noauth \
   connect "/usr/bin/wvdial --chat bellsouth"

------my /etc/wvdial.conf section ---

Modem = /dev/modem
Baud = 57600
Init1 = ATZ
Inti2 = ATQ0 V1 E1 S0=0 &C1 &D2
Dial Command = ATDT
Phone = 6859500
Username = myloginname
Password = mysecretpassword
#Ask Password = 1
Stupid Mode = 0
------------------

-------------------------------------------------------------------------------
13. Comments, ideas, problems, fixes? please contact:

Linux Voice Band Modems (VBM) of Intel Residential Access Division (RAD)

[email protected]
http://developer.intel.com/design/modems/

To restrict email volume, please email only development related issues that are
needed to fix a bug or improve the driver. General questions on how to use the
Linux OS will have to be forwarded.

Other resources and information on Linux controllerless modems can be found on
these usefull sites

http://www.linmodems.org
and
http://linmodems.technion.ac.il

我按说明做了。

1. login as ROOT
2. extract the archive into a directory with "tar -zxvf <archivename>.tgz"
3. cd into the directory it created.
4. Type: make clean
5. Type: make ham
前5步都没有问题。
6. Type: make install
有错误提示：　error: can't load ham
Kppp 找不到猫。从超时提示加载　ham.o 失败，加载hamcore.o失败。

然后按以下处理：

0.log in as root.
1.insmod -f hamcore.o

有错误提示。

2.insmod -f ham.o

有错误提示。

2a. you can start "hamregistry" at this point if you wish.

没处理。因为我不知道该怎么处理。

3.rm /dev/ham

没有错误提示。

4.mknod /dev/ham c 240 1 (note "240" is the default, if it does not
   work see what /proc/devices says ham's major number is)

生成了　/dev/ham但是长度为0Byte。

5.ln -s /dev/ham /dev/modem

有乱码输出。

以下不明白如何处理。

6.start a comm application like minicom and use the modem.
7.see section 3 (International Users) for info on setting the correct
   country settings.

求助。

cjy 发表于 2003-1-1 10:42:56

页: [1]

中国Linux公社论坛's Archiver

MODEM问题__请LINUX高手指教

Re: MODEM问题__请LINUX高手指教