请问为什么我的硬盘只有一个能开DMA?
两块硬盘，迈拓40G，希捷120G。只有迈拓的可以。不知道为什么？另外，我的机器开机的时候会友出错信息若下，为什么？请问？
Freeing unused kernel memory: 128k freed
hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdd: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdd: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdd: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdd: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdd: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdc: DMA disabled
ide1: reset: success
hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdd: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdd: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdd: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdd: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide1: reset: success
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
ehci-hcd 00:10.3: VIA Technologies, Inc. USB 2.0
ehci-hcd 00:10.3: irq 12, pci mem e0848b00
usb.c: new USB bus registered, assigned bus number 1
PCI: 00:10.3 PCI cache line size set incorrectly (32 bytes) by BIOS/FW.
PCI: 00:10.3 PCI cache line size corrected to 64.
ehci-hcd 00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Jan-22
hub.c: USB hub found
hub.c: 6 ports detected
usb-uhci.c: $Revision: 1.275 $ time 17:26:20 Mar 13 2003
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xe800, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xe400, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xe000, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 4
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <[email protected]>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,65), internal journal
Adding Swap: 524120k swap-space (priority -1)
hub.c: new USB device 00:10.0-1, assigned address 2
hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdd: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdd: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdd: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdd: dma_intr: error=0x84 { DriveStatusError BadCRC }
usb-uhci.c: interrupt, status 3, frame# 1032 怎么没有人告诉我？ 硬盘要坏了……
我的一个硬盘，安装比较大的rpm或者执行一些读盘强烈的操作就有那样的提示……不久之后就挂了…… 不会吧？我的硬盘去年的时候就有这种毛病了，而且那时候才买的而已。
而且两块都这样，另一块可是最近才买的。。。。
硬盘要坏了……
我的一个硬盘，安装比较大的rpm或者执行一些读盘强烈的操作就有那样的提示……不久之后就挂了…… hongewuyan:竟瞎说!我的硬盘也是一样,一直不知道为什么?可别危言耸听！有哪位高手指点一下呀,俺也明白一下!多谢了! 换个数据线或者换个借口不要用hdd（前提这个硬盘没有安装linux） ......I dont know what your meaninng? 怎么大家都这样呀,我的双硬盘也出现这个问题,我的主盘是WD的,从盘是富士通的,就从盘出现这个提示:(
请高手帮忙解决解决,不胜感激呀!!!!! 我原来只有一块硬盘的时候也是这样的说。。。好像不是因为双硬盘。 up again 和主板的IDE控制器有关啊。。。换个用KM400的芯片板就ok了。。。
页:
[1]