为什么要设置IP 自动获取
我的机器设成自动获取就不行，不设就就OK
关键是设置DNS 和留空网关,重启!
加精
DNS使用默认的就行了
pppoe服务器会自动分给你地址....
adsl-setup(su)
#adsl-setup
Welcome to the Roaring Penguin ADSL client setup. First, I will run some checks on your system to make sure the PPPoE client is installed
properly...
Looks good! Now, please enter some information:
USER NAME
>>> Enter your PPPoE user name (default XXX): 在这里输入ADSL的用户名
INTERFACE
>>> Enter the Ethernet interface connected to the ADSL modem For Solaris, this is likely to be something like /dev/hme0.
For Linux, it will be ethn, where n is a number.
(default eth0):如果一张网卡就设置写上eth0
Do you want the link to come up on demand, or stay up continuously?
If you want it to come up on demand, enter the idle time in seconds after which the link should be dropped. If you want the link to stay up permanently, enter no (two letters, lower-case.)
NOTE: Demand-activated links do not interact well with dynamic IP addresses. You may have some problems with demand-activated links.
>>> Enter the demand value (default no):（这里是关键，如果你得pppoe服务商自动分配dns服务器。。。就填入小写server)
Please enter the IP address of your ISPs primary DNS server.
If your ISP claims that the server will provide DNS addresses,
enter server (all lower-case) here.
If you just press enter, I will assume you know what you are doing and not modify your DNS setup.
>>> Enter the DNS information here:在这里写上192.168.0.1
下一个DNS是192.168.1.2//这里根据个人不同可以修改
PASSWORD
>>> Please enter your PPPoE password:输入密码
>>> Please re-enter your PPPoE password:再输入一次
FIREWALLING
Please choose the firewall rules to use. Note that these rules are very basic. You are strongly encouraged to use a more sophisticated firewall setup; however, these will provide basic security. If you are running any servers on your machine, you must choose NONE and set up firewalling yourself. Otherwise, the firewall rules will deny access to all standard servers like Web, e-mail, ftp, etc. If you are using SSH, the rules will block outgoing SSH connections which allocate a privileged source port.
The firewall choices are:
0 - NONE: This script will not set any firewall rules. You are responsible for ensuring the security of your machine. You are STRONGLY
recommended to use some kind of firewall rules.
1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation
2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway
for a LAN
>>> Choose a type of firewall (0-2):这里添写为2
** Summary of what you entered **
Ethernet Interface: eth0
User name: XXX
Activate-on-demand: No
DNS: Do not adjust
Firewalling: MASQUERADE
>>> Accept these settings and adjust configuration files (y/n)?
y就ok了！
不用去设备什么DNS也可以,
直接把原来的那个连接删掉
再新建一个XDSL就可以了.
万分感谢LUOKE
我就是这样搞定的
有了图就直观多了~~
十分感谢!!
看了我再去搞搞,但是我的ISP是shapingba-erx\,,最后哪个'\'在输入时没有显示的,我又在文本上写了,ctrl+c,ctrl+v,还是不行,这怎么办哟!!
还有那DNS没给,是不是就是二楼的那位仁兄的配置!!
wo 上网的时候似乎很简单
你要 下一个rp-pppoe-3.5拉
再添加到内核去
我的很 的 问题差不多拉
今天得到解决拉
还有自己找一下当地的DNS拉
纪念自己成功上网，再次顶一下这个帖子，请初哥们用来参考。并再次请斑竹加精！
为什么我设置了自动获得DNS,也成功获得了DNS
可看网页就是不行啊
PING DNS也不行
各位大大，但是如果是纯文本界面，怎么设置啊，我公司里用的是没有x－window啊，还有怎么在x－window下怎么设置拨号上网啊
dialup还是pppoe，如果是后者，就用adsl-setup设置，具体请搜索论坛。
我在fc1中一直用命令行！adsl－setup！主要在dns时输入server！比图形界面好用！