我是说转了安装后会不会有问题? 2.6.8中正式加入了对加载分区的代码页支持,即在里面直接设置为中文的,就不需要在fstab里加iocharset参数了。 :mrgreen:
似乎 2.4.x 就可以啊~~~~~~ 2.6.8.1 了
出现了一个低级的错误。 等 2.6.8 的 cko 补丁出来,我们再升级吧。 老问题了
我的猫只支持到266.
yourfeng,麻烦你下会做 kernel 的 rpm 的时候
把这几个选上
Code maturity level options
[*] Prompt for development and/or incomplete code/drivers
Loadable module support
[*] Enable loadable module support
[*] Set version information on all module symbols
[*] Kernel module loader
Networking options
<*> Packet socket
<*> Unix domain sockets
[*] TCP/IP networking
[*] Asynchronous Transfer Mode (ATM)
USB support
<*> Support for USB
[*] Preliminary USB device filesystem
<M> UHCI
<M> OHCI
<M> Alcatel Speedtouch USB support (USB_SPEEDTOUCH)
Networking options
[*] Asynchronous Transfer Mode (ATM)
[*] Classical IP over ATM
Networking options
[M] RFC1483/2684 Bridged protocols
Network Device Support
<M > PPP (point-to-point protocol) support
<M> PPP Deflate compression
<M> PPP over Ethernet (EXPERIMENTAL)
Network Device Support
<M > PPP (point-to-point protocol) support
<M> PPP Deflate compression
<M> PPP over ATM
Processor type and features
[ ] Symmetric multi-processing support
Cryptographic API (CRYPTO)
<M>CRC32c CRC algorithm (CRYPTO_CRC32C)
Library routines
<M>CRC32c (Castagnoli, et al) Cyclic Redundancy-Check (LIBCRC32C)
因为这几个东西害得我每次升级kernel的时候都不能用现成的。
我的烂机器…… :cry: 打上cp936 cp935http://sepi.be/nitro/patch-2.6.8-rc4-nitro2.bz2这几个补丁就够了
页:
1
[2]