这个是因为conf设置不对嘛?
已经有一个能在ep7312上跑的系统,包括armboot.bin,zImage,和文件系统file.gz.
armboot.bin 84167
zImage 518120
file.gz 787209
conf是这么写的:
cpu: arm720t
mach: ep7312
mem_bank: map=I, type=RW, addr=0x80000000, size=0x00010000
mem_bank: map=M, type=RW, addr=0xc0000000, size=0x00020000, file=./armboot.b
in, boot=yes
mem_bank: map=M, type=RW, addr=0xc0020000, size=0x000a0000, file=./zImage
mem_bank: map=M, type=RW, addr=0xc00c0000, size=0x00100000, file=./file.gz
mem_bank: map=M, type=RW, addr=0xc01c0000, size=0x00c00000
跑的时候信息如下:
ARMboot code: c0500000 -> c0517f14
DRAM Configuration:
Bank #0: c0000000 8 MB
Flash: 16 MB
*** Using default environment
Hit any key to stop autoboot:0
CS8900 Ethernet chip not found?!
BOOTP broadcast 1
cs: unable to send packet; retrying...
cs: unable to send packet; retrying...
ARMboot 1.0.2 (Dec 17 2003 - 13:32:47)
ARMboot code: c0500000 -> c0517f14
DRAM Configuration:
Bank #0: c0000000 8 MB
Flash: 16 MB
*** Using default environment
Hit any key to stop autoboot:0
Base Address: 0x00000000
EP7312 # boot
CS8900 Ethernet chip not found?!
BOOTP broadcast 1
cs: unable to send packet; retrying...
cs: unable to send packet; retrying...
cs: unable to send packet; retrying...
是conf设置的原因嘛?请指教 需要重新编译内核，把cs8900的驱动去掉。
skyeye没有模拟cs8900网卡驱动。
页:
[1]