RH9装好后第一次进去了第二次却进不去！
Xeon x 2SE7500CW主板，集成双网卡，安装时认出了eth0，eth1两块集成网卡，因为只用了一个，就配置了一个，另一个让它自动了。
第一次系统装好后直接进了G的XWindow，先认声卡，把我的SB PCI 128 Digital认成了5880 Ensoniq ES1371，好象也不能算错，没音箱，就没管它，接受了。然后进Mozila，打不开网页，不管输数字IP Address还是字符的域名都找不到网页。进Terminal能Ping通。进网络配置程序，没有设DNS！可我安装时明明设好了的啊！
只好重设一个。Mozila还是访问不了任何网页，本地的没问题。重启，到了什么Net 4.0以后就出现错误，光标就不再往下走了。系统无法起动。我直觉是某个硬件的驱动有问题，而图形化网络设置根本不可用！现在起不来了，连行命令都进不了，请问大牛们该怎么办啊？ :-( 对了，是APM错误。 这是Google和RedHat用户组上能找到的最接近的资料了，似乎建议是改内核为kernel-debug-2.4.18-14，各位还有没什么好招呢？
Search psyche-list for:
Results per page:102050 Output format:LongShortURL Match:AllAnyBooleanFull phrase Search for:Whole wordBeginningEndingSubstring in:all sectionsDescriptionKeywordsTitleBody in:This time period only This mailing list only Search all lists...
--------------------------------------------------------------------------------
Re: Intel SE7500 CW2 and RedHat 8.0
--------------------------------------------------------------------------------
From: "Frank N?" <frank norvig dk wilsonlog com>
To: <psyche-list redhat com>
Subject: Re: Intel SE7500 CW2 and RedHat 8.0
Date: Mon, 3 Feb 2003 08:48:47 +0100
--------------------------------------------------------------------------------
Hello Iain,
The problem was the same wether APM and ACPI was enabled or disabled. Several times RH made a kernel-dump at the exact same spot. RH never got to write "Power down".
But when I changed to kernel-debug-2.4.18-14 everything seemed to work.
We also experienced that our servers with Adaptec SCSI Raid 3200S locked up when booting. This wa also fixed when using the debugged kernel.
Frank N?rvig
----
AFAIK its not really a problem.I assume its 'stalling' after the
message 'Power down' or 'system halted'?My guess is because you've
turned off APM _and_ ACPI RH can't tell the computer to switch off, so
it just goes in the old windows state 'its now safe to turn off your
computer'.You need at least one of these to do things shutdown and
power save functions.If you're going to spend time on it, I recommend
ACPI because I think its intended to replace APM.
--
Iain Buchanan <iain nospam pcorp com au>
Reichel's Law:
A body on vacation tends to remain on vacation unless acted upon
by an outside force.
--------------------------------------------------------------------------------
References:
Re: Intel SE7500 CW2 and RedHat 8.0
From: Iain Buchanan
Copyright ? 2004 Red Hat, Inc. All rights reserved. Search by Google
Privacy Policy : Careers at Red Hat : Legal statement : Patent promise : Contact Red Hat
Log in to Your Account
| |
Search psyche-list for:
Results per page:102050 Output format:LongShortURL Match:AllAnyBooleanFull phrase Search for:Whole wordBeginningEndingSubstring in:all sectionsDescriptionKeywordsTitleBody in:This time period only This mailing list only Search all lists...
--------------------------------------------------------------------------------
Re: Intel SE7500 CW2 and RedHat 8.0
--------------------------------------------------------------------------------
From: Iain Buchanan <iain pcorp com au>
To: psyche-list redhat com
Subject: Re: Intel SE7500 CW2 and RedHat 8.0
Date: 03 Feb 2003 09:13:13 +0930
--------------------------------------------------------------------------------
On Fri, 2003-01-31 at 22:52, Frank NXrvig wrote:
> We've recently bought 2 new servers with following specifications:
> Motherboard: Intel SE7500 CW2
> CPU: 2 x Intel Pentium 4 Xeon 2,4 CPUs
>
> There's no problem installing RedHat 8.0 when excluding APM/ACPI
> (these seems to cause some boot-problems?!) but when doing a shutdown
> -h or shutdown -r the system stalls.
>
> As far as I can see the system stalls excactly when RH is sending a
> signal to the BIOS to shutdown or reboot, but it happens after the
> log-deamon has been shutdown so I cant seem to trace what causes the
> problem.
>
> Has anyone here experienced this problem or has any suggestions on how
> I could make it work?
AFAIK its not really a problem.I assume its 'stalling' after the
message 'Power down' or 'system halted'?My guess is because you've
turned off APM _and_ ACPI RH can't tell the computer to switch off, so
it just goes in the old windows state 'its now safe to turn off your
computer'.You need at least one of these to do things shutdown and
power save functions.If you're going to spend time on it, I recommend
ACPI because I think its intended to replace APM.
--
Iain Buchanan <iain nospam pcorp com au>
Reichel's Law:
A body on vacation tends to remain on vacation unless acted upon
by an outside force.
Attachment: signature.asc
Description: This is a digitally signed message part
--------------------------------------------------------------------------------
Follow-Ups:
Re: Intel SE7500 CW2 and RedHat 8.0
From: Frank N?
页:
[1]