slsgy 发表于 2004-11-9 09:43:32

斑竹，，大虾们们帮忙看一下！！

昨天晚上升级Fedora core1到Fedora core 2启动时内核出现一下错误：
以下是内核启动日志：gnome的x界面也出现报错，具体看下面图片：小弟先谢
了！！
x59 { DriveReady SeekComplete DataRequest Error }
hdd: status error: error=0x20LastFailedSense 0x02
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: ATAPI reset complete
hdd: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdd: status error: error=0x20LastFailedSense 0x02
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: ATAPI reset complete
hdd: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdd: status error: error=0x20LastFailedSense 0x02
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: ATAPI reset complete
hdd: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdd: status error: error=0x20LastFailedSense 0x02
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: ATAPI reset complete
hdd: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdd: status error: error=0x20LastFailedSense 0x02
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: ATAPI reset complete
hdd: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdd: status error: error=0x20LastFailedSense 0x02
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: ATAPI reset complete
hdd: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdd: status error: error=0x20LastFailedSense 0x02
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataReq

slsgy 发表于 2004-11-9 09:52:36

小弟的linux系统是为了打造图型工作站做的，，我的机子在win下面玩maya+prmen有些慢，，在linux里面快很多，昨晚上升级后发现Fedora core 2速度 比1快不少，，原先的图形软件都能用，， :-D:-D ，，还有一个问题输入法也不能启动拉，，那个安装Fedora core 2常见的问题集锦的精华帖怎么没啦，，斑竹帮忙给个连接，，我没搜到 :-(:-(

linky_fan2 发表于 2004-11-9 16:00:11

HDD？
是安装了两个光驱吗？
你接了几个光驱，几个硬盘？
这是重点，一定要回答。

linky_fan2 发表于 2004-11-9 16:01:13

我栽！
是键盘类型选择错误啊。
八成你的键盘类型没有选对。

slsgy 发表于 2004-11-9 16:11:08

先谢谢斑竹，，我是装了两个光驱，，一个dvd，一个刻录机 ，，硬盘一个，，键盘普通的键盘，，安装的时候默认的

slsgy 发表于 2004-11-9 16:14:19

这个是怎么回事呀斑竹，，一下是抓图，，

slsgy 发表于 2004-11-9 16:18:12

哈哈 :-D 真不好意思，我也仔细看了一下，，在gnome的x下面写的是键盘错误，，我真水，，但是在kde下面没问题，，回头我再重新设一下，，但是内核错误估计是你说的光驱的毛病，，还需要斑竹帮忙解答

fox_eagle2003 发表于 2004-11-9 16:20:06

第二光驱出了问题（它报的：hdd是第二光驱）
keyboard（键盘）出了点小问题。可以贴出你键盘的广告吗？我想看看是什么样的。一般系统是选标准的101个键的键盘，但如果是非101键盘，就会出错。

slsgy 发表于 2004-11-9 16:29:14

我现在在公司，，晚上回家我看看键盘，
光驱应该怎么解决呀，，难道光驱跳线的问题，，我在主板第二通道挂两个光驱的，，当时也没怎么设定

fox_eagle2003 发表于 2004-11-9 16:36:14

:-D 不管它，先修复一下键盘吧。
hdd:
hdd: status error: status=0x58 { DriveReady SeekComplete DataReq


其实就是一句话重新显示了许多次，关键是
drive not ready for command


光驱没有准备好，一般是找不到或准备坏了的前兆（不敢肯定）

slsgy 发表于 2004-11-9 16:55:21

:cry::cry: 不能把，，刚买的光驱呀，，晚上我弄一下，，回头我来汇报情况 :-D:-D不管他拉，，能启动，，两个光驱都好用 :-D先弄一下键盘，，，嘿嘿

slsgy 发表于 2004-11-10 09:10:41

fox_eagle2003, 你好斑竹，，键盘已经ok啦，，谢谢！！光驱的问题应该怎么解决？？进入系统能用，，我昨晚上弄半天，，摘下来就好啦，，挂上就不行，，挂一个也不行，，期待解决，，！！

slsgy 发表于 2004-11-10 09:12:52

键盘我选错啦，，选了105，，嘿嘿，，真晕呀，，

slsgy 发表于 2004-11-10 11:06:52

hdc: SAMSUNG DVD-ROM SD-616E, ATAPI CD/DVD-ROM drive
hdd: APACHI CD_1632 DRIVE, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 80418240 sectors (41174 MB) w/1863KiB Cache, CHS=65535/16/63, UDMA(100)
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 >
hdc: ATAPI 48X DVD-ROM CD-MR drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdd: status error: error=0x20LastFailedSense 0x02
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: DMA disabled
hdd: drive not ready for command
hdd: ATAPI reset complete
hdd: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdd: status error: error=0x20LastFailedSense 0x02
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: ATAPI reset complete
hdd: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdd: status error: error=0x20LastFailedSense 0x02
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: ATAPI reset complete
hdd: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdd: status error: error=0x20LastFailedSense 0x02
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: ATAPI reset complete
hdd: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdd: status error: error=0x20LastFailedSense 0x02
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: ATAPI reset complete
hdd: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdd: status error: error=0x20LastFailedSense 0x02
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: ATAPI reset complete
hdd: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdd: status error: error=0x20LastFailedSense 0x02
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: ATAPI reset complete
hdd: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdd: status error: error=0x20LastFailedSense 0x02
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: ATAPI reset complete
hdd: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdd: status error: error=0x20LastFailedSense 0x02
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: ATAPI reset complete
hdd: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdd: status error: error=0x20LastFailedSense 0x02
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: ATAPI reset complete
hdd: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdd: status error: error=0x20LastFailedSense 0x02
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: ATAPI reset complete
hdd: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdd: status error: error=0x20LastFailedSense 0x02
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: ATAPI reset complete
hdd: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdd: status error: error=0x20LastFailedSense 0x02
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: ATAPI reset complete
hdd: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdd: status error: error=0x20LastFailedSense 0x02
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: ATAPI reset complete
hdd: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdd: status error: error=0x20LastFailedSense 0x02
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: ATAPI reset complete
hdd: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdd: status error: error=0x20LastFailedSense 0x02
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: ATAPI reset complete
hdd: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdd: status error: error=0x20LastFailedSense 0x02
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: ATAPI reset complete
hdd: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdd: status error: error=0x20LastFailedSense 0x02
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: ATAPI reset complete
hdd: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdd: status error: error=0x20LastFailedSense 0x02
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: ATAPI reset complete
hdd: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdd: status error: error=0x20LastFailedSense 0x02
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: ATAPI reset complete
hdd: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdd: status error: error=0x20LastFailedSense 0x02
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: ATAPI reset complete
hdd: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdd: status error: error=0x20LastFailedSense 0x02
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: ATAPI reset complete
hdd: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache

slsgy 发表于 2004-11-10 11:09:12

以上是比较完整的一段，，望指点迷津！！
页: [1] 2
查看完整版本: 斑竹，，大虾们们帮忙看一下！！