M大人，我也碰到了cdrecord的灵异事件了，呵呵
我用cdrecord刻盘，显示一切ok，但是盘上面什么都没有。我用的命令是： cdrecord dev=ATA:1,1,0 speed=24 -tao -v hiweed055-livecd-w445.iso屏幕显示：
Cdrecord-Clone 2.01a27-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to <[email protected]>.
Note: The author of cdrecord should not be bothered with problems in this version.
TOC Type: 1 = CD-ROM
scsidev: 'ATA:1,1,0'
devname: 'ATA'
scsibus: 1 target: 1 lun: 0
Warning: Using badly designed ATAPI via /dev/hd* interface.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.80-RH '@(#)scsi-linux-sg.c 1.80 04/03/08 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
atapi: -1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'CD-RW '
Identifikation : 'SMART CLONE24 '
Revision : '5SW2'
Device seems to be: Generic mmc CD-RW.
Current: 0x0009
Profile: 0x000A
Profile: 0x0009 (current)
Profile: 0x0008
Profile: 0x0002 (current)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1966272 = 1920 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 237 MB
Total size: 273 MB (27:02.85) = 121714 sectors
Lout start: 273 MB (27:04/64) = 121714 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
ATIP start of lead in:-11634 (97:26/66)
ATIP start of lead out: 359846 (79:59/71)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 238132
Starting to write CD/DVD at speed24.0 in real TAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is ON.
Turning BURN-Free off
Performing OPC...
Starting new track at sector: 0
Track 01:237 of237 MB written (fifo 100%) 24.3x.
Track 01: Total bytes read/written: 249266176/249266176 (121712 sectors).
Writingtime: 99.901s
Average write speed18.2x.
Min drive buffer fill was 61%
Fixating...
Fixating time: 21.883s
cdrecord: fifo had 3927 puts and 3927 gets.
cdrecord: fifo was 0 times empty and 3332 times full, min fill was 81%.
不知那位大人可指点迷津，不胜感激。 说实在的 俺还没有自己刻过盘呢:oops: 俺也不知该如何解决 -- 主要是因为自己没有这个条件测试，抱歉 :oops:
另，你的标题把我吓一跳，下次可别再写什么“M大人”了 :oops: :mrgreen: 算了吧，别直接用cdrecorder刻盘了，下载安装个k3b吧，我也用cdrecorder刻过盘，好像刻出来的不是iso9660格式的。 k3b 只是个图形前端，最终还是调用的 cdrecord。 没有 cdrecord 它是不能干活滴~~
还是先检验一下 iso 的 md5sum，没错的话改个刻录模式、降低刻录速度等等方式试一下。
偶只用 cdrecord， 还没有遇到过刻不出东东的时候。 谢谢诸位的回答!我的盘在windows下面还是可以读的,偏偏在自己的linux下啥都没有,呵呵
难道说是我mount参数不对?我用的是mount -o loop xxx.iso /mnt/cdrom1 这跟你刻的盘有啥关系？ 你这是 mount 镜像文件啊？ 然后没有错误， ls /mnt/cdrom1 就啥都没有？ 不好意思是我的笔误，我本想说我 用mount /dev/cdrom/mnt/cdrom1的，真不好意思。
页:
[1]