终于搞定了!Linux下的TwinView配置for N卡
在Nvidia 的readma指示下,我成功的配置好了TwinView我的xorg.conf for N卡配置如下:
Section "ServerLayout"
Identifier "TwinView"
Screen "TwinView"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "CPD 4410"
DisplaySize360 310
HorizSync 30.0 - 107.0
VertRefresh48.0 - 120.0
Option "dpms"
EndSection
Section "Device"
Identifier"TwinView"
Driver "nvidia"
VendorName"nvidia"
BoardName "NVIDIA Quadro FX (generic)"
Option "TwinView"
Option "dpms"
Option "DigitalVibrance" "2"
Option "MetaModes" "1400x1050,1400x1050; 1280x1024,1280x1024; 1024x768,1024x768;"
Option "SecondMonitorHorizSync" "30.0 - 110.0"
Option "SecondMonitorVertRefresh" "50.0 - 150.0"
Option "TwinViewOrientation" "LeftOf"
Option "ConnectedMonitor" "CRT, CRT"
Option "RenderAccel" "TRUE"
EndSection
Section "Screen"
Identifier "TwinView"
Device "TwinView"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
以下是xorg.conf全文:
# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "TwinView"
Screen "TwinView"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# RgbPath is the location of the RGB database.Note, this is the name of the
# file minus the extension (like ".txt" or ".db").There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "Module"
Load"dbe"
Load"extmod"
Load"fbdevhw"
Load"glx"
Load"record"
Load"freetype"
Load"type1"
Load"dri"
EndSection
Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier"Keyboard0"
Driver "keyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier"Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "CPD 4410"
DisplaySize360 310
HorizSync 30.0 - 107.0
VertRefresh48.0 - 120.0
Option "dpms"
EndSection
Section "Device"
Identifier"TwinView"
Driver "nvidia"
VendorName"nvidia"
BoardName "NVIDIA Quadro FX (generic)"
Option "TwinView"
Option "dpms"
Option "DigitalVibrance" "2"
Option "MetaModes" "1400x1050,1400x1050; 1280x1024,1280x1024; 1024x768,1024x768;"
Option "SecondMonitorHorizSync" "30.0 - 110.0"
Option "SecondMonitorVertRefresh" "50.0 - 150.0"
Option "TwinViewOrientation" "LeftOf"
Option "ConnectedMonitor" "CRT, CRT"
Option "RenderAccel" "TRUE"
EndSection
Section "Screen"
Identifier "TwinView"
Device "TwinView"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
谢谢各位高手的支持,谢谢!
页:
[1]