在终端运行init 3
系统提示 starting anacron ok
之后便死在那里了
是什么原因？
我也出现这种情况，怎么解决啊？ 我在AS4 中装上了 经过我的实验,其实只要这样就可以了,安装完驱动后,修改/etc/X11/xorg.conf.这时候你用startx就可以加载驱动了,但是你只要重启又不能进入X了,只要再cp -a /dev/nvidia* /etc/udev/devices就可以成功了.其他的步骤都可以不用.我的实验配置是.CPU速龙900 .内存DDR333256M.硬盘西数20G.主板是精英K7S5A.CDROM是索尼CDU5221 .显卡是GEFOCE FX5200.声卡是8738. 电视卡是SAA7130芯片的. 还有就是USB的蓝牙适配器.USB2.0转接卡.
我就是按这位大哥的方法装的，进X前也看到了白底的Nvidia的LOGO，然后进到x的桌面，不知道这样是真的装上了还是假象呢？ download NVIDIA-Linux-x86-1.0-7174-pkg1.run
edit xorg.conf
change init from 5 to 3
restart
modprobe -q agpgart
sh NVIDIA-Linux-x86-1.0-7174-pkg1.run -e
Re: FedoraCore3上面安装nvidia显卡驱动-
I install the video card just like this, but it show Nvidia Logo and can'tstart X.
Change to new version driver 1.0-7174
just need to install the driver and
chang the "Device section""nv"to "nvidia"
and "Module section""Load dri"to "# Load dri"
in file /etc/X11/xorg.conf
Now it's ok
My card is TNT2 M64
首先到 http://www.nvidia.com 网站下载最新的 Linux Driver
执行 sh NVIDIA-Linux-x86-1.0-6629-pkg1.run 把它装进去
然后修改 /etc/X11/xorg.conf 中的 nv 换成 nvidia
接著修改 /etc/grub/grub.conf
要先将 kernel 启动的 append 中的 rhgb 去掉
并且将 modprobe nvidia 加到 /etc/rc.local 最后一行
重新启动 FC3 然后
cp -a /dev/nvidia* /etc/udev/devices
chown root.root /etc/udev/devices/nvidia*
接下来把 rhgb 的 append 加回去
去掉 /etc/rc.local 中的 modprobe nvidia
再重新启动 FC3 就可以了... Enjoy it! *^^* "要先将 kernel 启动的 append 中的 rhgb 去掉 "
这个怎么改?? 楼主的方法没有问题,我按照楼主说的成功安装,没有出现任何问题,并且我还打开了硬件鼠标阴影效果,比原来用软件实现要节省系统资源。以下说明几点楼主没说清楚的地方：
1.修改/etc/inittab，把
id:5:initdefault: 改为
id:3:initdefault:这样就能直接进入console模式了；
2.修改Xorg.conf，我只说我自己多改的地方
大家可以看到有很多section，像Monitor，Device中的VerdorName,BoardName都是可以自己改的，如果你看到好端端的Geforce 6600被认成genenic card什么的，就可以自己改过来了：）
添加的Option都可以在nVidia的readme.txt中找到，以下是我的配置文件的一段：
Section "Monitor"
Identifier "Monitor0"
VendorName "SVA China"(这是自己改的)
ModelName "SVA 532A"
DisplaySize300 230
HorizSync 30.0 - 60.0
VertRefresh55.0 - 75.0
Option "dpms"
EndSection
Section "Device"
Identifier"Videocard0"
Driver "nvidia"(这是自己改的)
VendorName"nVIDIA Inc"(这是自己改的)
BoardName "nvidia driver (nVIDIA Geforce 6600)"(这是自己改的)
Option "NoLogo" "1"(这是自己加的)
Option "CursorShadow" "1"(这是自己加的)
EndSection
3.grub.conf的连接在/etc下，没有/etc/grub，反正我用的是FC3，确实没有
4.所谓"要先将 kernel 启动的 append 中的 rhgb 去掉 "，其实就是把rhgb这个参数先去掉，
原来的配置文件是：
kernel /boot/vmlinuz-2.6.9-1.667 ro root=LABEL=Linux rhgb quiet
去掉后就是
kernel /boot/vmlinuz-2.6.9-1.667 ro root=LABEL=Linux quiet
大家不要想多了，其实了解RedHat Graphical Boot的原理就容易理解了
5.拷贝/dev/nvidia*的时候大家不要忘了那个*号，其实要拷贝好几个文件的
没了，最后谢谢楼主转贴：）
我的配置见下面 路过复习 要先将 kernel 启动的 append 中的 rhgb 去掉
这一步怎么实现呀。 老大，就在你上面两层，写的这么详细都看不到啊，别玩linux了！ 笔记本电脑也是这样安装吗 我在single模式下安装驱动程序,但不成功.log 文件如下:
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Fri Jul 15 19:04:18 2005
option status:
license pre-accepted : false
update : false
force update : false
expert : false
uninstall : false
driver info : false
no precompiled interface: false
no ncurses color : false
query latest driver ver : false
OpenGL header files : false
no questions : false
silent : false
no backup : false
kernel module only : false
sanity : false
add this kernel : false
no runlevel check : false
no network : false
no ABI note : false
no RPMs : false
force tls : (not specified)
force compat32 tls : (not specified)
X install prefix : /usr/X11R6
OpenGL install prefix : /usr
compat32 install prefix : (not specified)
installer install prefix: /usr
utility install prefix: /usr
kernel name : (not specified)
kernel include path : (not specified)
kernel source path : (not specified)
kernel output path : (not specified)
kernel install path : (not specified)
proc mount point : /proc
ui : (not specified)
tmpdir : /tmp
ftp mirror : ftp://download.nvidia.com
RPM file list : (not specified)
Using: nvidia-installer ncurses user interface
WARNING: Skipping the runlevel check (the utility `runlevel` failed to run).
-> License accepted.
-> No precompiled kernel interface was found to match your kernel; would you li
ke the installer to attempt to download a kernel interface for your kernel f
rom the NVIDIA ftp site (ftp://download.nvidia.com)? (Answer: Yes)
ERROR: Unable to connect to download.nvidia.com (temporary DNS error (try again
later))
-> No matching precompiled kernel interface was found on the NVIDIA ftp site;
this means that the installer will need to compile a kernel interface for
your kernel.
ERROR: Unable to find the kernel source tree for the currently running kernel.
Please make sure you have installed the kernel source files for your
kernel; on Red Hat Linux systems, for example, be sure you have the
'kernel-source' rpm installed.If you know the correct kernel source
files are installed, you may specify the kernel source path with the
'--kernel-source-path' commandline option.
ERROR: Installation has failed.Please see the file
'/var/log/nvidia-installer.log' for details.You may find suggestions
on fixing installation problems in the README available on the Linux
driver download page at www.nvidia.com.
高手帮我看下什么原因啊.
superfang你的个人恰签名好搞笑喔..
用java来编linux?.... 哈哈不说别的.. 你应该用过lumaQQ吧..是用java编的.. 在配置稍好点的机子上用.还过的去.. 如果在配置低的机子上用的话..不说了..一个字慢...
可以想像一下..用java来编linux...可以用老汉推卡车来形容拉
这只是很简单的一个比喻.来说明C的伟大阿.... 偶的机器FC3系统,一旦退出Xwindows,键盘就没有响应,一会后硬盘开始狂转.郁闷啊.不知道大家有没有遇到过这样的问题阿. nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Thu Sep 29 23:57:30 2005
option status:
license pre-accepted : false
update : false
force update : false
expert : false
uninstall : false
driver info : false
no precompiled interface: false
no ncurses color : false
query latest driver ver : false
OpenGL header files : true
no questions : false
silent : false
no backup : false
kernel module only : false
sanity : false
add this kernel : false
no runlevel check : false
no network : false
no ABI note : false
no RPMs : false
force tls : (not specified)
force compat32 tls : (not specified)
X install prefix : /usr/X11R6
OpenGL install prefix : /usr
compat32 install prefix : (not specified)
installer install prefix: /usr
utility install prefix: /usr
kernel name : (not specified)
kernel include path : (not specified)
kernel source path : (not specified)
kernel output path : (not specified)
kernel install path : (not specified)
proc mount point : /proc
ui : (not specified)
tmpdir : /tmp
ftp mirror : ftp://download.nvidia.com
RPM file list : (not specified)
Using: nvidia-installer ncurses user interface
-> License accepted.
-> No precompiled kernel interface was found to match your kernel; would you li
ke the installer to attempt to download a kernel interface for your kernel f
rom the NVIDIA ftp site (ftp://download.nvidia.com)? (Answer: Yes)
ERROR: Unable to connect to download.nvidia.com (temporary DNS error (try again
later))
-> No matching precompiled kernel interface was found on the NVIDIA ftp site;
this means that the installer will need to compile a kernel interface for
your kernel.
ERROR: Unable to find the kernel source tree for the currently running kernel.
Please make sure you have installed the kernel source files for your
kernel; on Red Hat Linux systems, for example, be sure you have the
'kernel-source' rpm installed.If you know the correct kernel source
files are installed, you may specify the kernel source path with the
'--kernel-source-path' commandline option.
ERROR: Installation has failed.Please see the file
'/var/log/nvidia-installer.log' for details.You may find suggestions
on fixing installation problems in the README available on the Linux
driver download page at www.nvidia.com.
我也出现同样的问题!
我的系统是 FC4