diamond99 发表于 2004-12-12 14:17:53

redhat7.2下配置液晶显示器分辨率的问题

先说说我的硬件配置：
显卡是NVIDA GF4 MX440，显示器为HYUNDAI 17’液晶Q17N

我安装完毕redhat72后的显示器默认分辨率是800×640，这实在太难受了，可是无论我怎么修改XF86config，要不只能显示800×600，要不更糟糕，只能显示340×*，我不知道还有什么办法能够达到这一目的，下面请大侠看看我的方法是否正确：

我首先下载了NVIDIA-Linux-x86-1.0-6629-pkg1.run，并且按照README用 :oops: sh NVIDIA-Linux-x86-1.0-6629-pkg1.run安装了显卡驱动（可是我不知道怎么查看是否安装上？？）
然后我使用Xconfigurator进行配置，显卡我选择了nvida GF4(generic)，显示器类型由于list中没有相应的显示器类型，所以我使用custom设置了说明书上正确的水平/垂直扫描频率，设置结束后还依然是600×400，无法工作到1024×768以上！

我也尝试修改过xf86config，但是修改后进入Xwindow依然无法工作到1024×768以上。我都快发狂了，我不知道还有什么方法，请大侠帮帮我吧。

下面是我的修改的xf86config文件，大侠看看是什么问题吧，多谢

# File generated by XConfigurator.

# **********************************************************************

Section "Files"
    RgbPath        "/usr/X11R6/lib/X11/rgb"
    FontPath   "unix/:7100"
EndSection

Section "ServerFlags"
    #NoTrapSignals
    #DontZap
    #DontZoom
EndSection

Section "Keyboard"

    Protocol    "Standard"

    # when using XQUEUE, comment out the above line, and uncomment the
    # following line
    #Protocol   "Xqueue"

    AutoRepeat500 5

    # Let the server do the NumLock processing.This should only be
    # required when using pre-R6 clients
    #ServerNumLock

    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    #Xleds      1 2 3

    #To set the LeftAlt to Meta, RightAlt key to ModeShift,
    #RightCtl key to Compose, and ScrollLock key to ModeLock:

    LeftAlt      Meta
    RightAlt      Meta
   ScrollLock      Compose
   RightCtl      Control

# To disable the XKEYBOARD extension, uncomment XkbDisable.

#    XkbDisable

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).For example, for a non-U.S.
# keyboard, you will probably want to use:
#    XkbModel    "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#    XkbModel    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    XkbLayout   "de"
# or:
#    XkbLayout   "de"
#    XkbVariant"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    XkbOptions"ctrl:swapcaps"

# These are the default XKB settings for XFree86
#    XkbRules    "xfree86"
#    XkbModel    "pc101"
#    XkbLayout   "us"
#    XkbVariant""
#    XkbOptions""

   XkbKeycodes   "xfree86"
   XkbTypes      "default"
   XkbCompat       "default"
   XkbSymbols      "us(pc101)"
   XkbGeometry   "pc"
   XkbRules      "xfree86"
    XkbModel      "pc101"
    XkbLayout       "us"
EndSection

# **********************************************************************
# Pointer section
# **********************************************************************

Section "Pointer"
    Protocol    "PS/2"
    Device      "/dev/mouse"
    ZAxisMapping 4 5

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Protocol        "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice

#    BaudRate        9600
#    SampleRate        150

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Emulate3Buttons
#    Emulate3Timeout    50

# ChordMiddle is an option for some 3-button Logitech mice

#    ChordMiddle

EndSection


##########################################################################
# Module section---by hening
##########################################################################

Section "Module"

    Load      "dbe"

    # Load the glx module.
    Load        "glx"

    Load      "extmod"

    Load        "type1"
    Load        "freetype"
EndSection


# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier"CustomConfiguration"
    VendorName"Hyundai-Raymond"
    ModelName   "Raymond"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync   31-80

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 56-75

# Modes can be specified in two formats.A compact one-line format, or
# a multi-line format.

# These two are equivalent

#    ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace

#    Mode "1024x768i"
#      DotClock        45
#      HTimings        1024 1048 1208 1264
#      VTimings        768 776 784 817
#      Flags                "Interlace"
#    EndMode

# This is a set of standard mode timings. Modes that are out of monitor spec
# are automatically deleted by the server (provided the HorizSync and
# VertRefresh lines are correct), so there's no immediate need to
# delete mode timings (unless particular mode timings don't work on your
# monitor). With these modes, the best standard mode that your monitor
# and video card can support for a given resolution is automatically
# used.

# 512x384 @ 78 Hz, 31.50 kHz hsync
Modeline "512x384"    20.160 512528592640   384385388404 -HSync -VSync
# 512x384 @ 85 Hz, 34.38 kHz hsync
Modeline "512x384"    22   512528592640   384385388404 -HSync -VSync

# 640x400 @ 70 Hz, 31.5 kHz hsync
Modeline "640x400"   25.175 640664760800   400409411450
# 640x400 @ 85 Hz, 37.86 kHz hsync
Modeline "640x400"   31.5   640672 736   832   400401404445 -HSync +VSync

# 640x480 @ 100 Hz, 53.01 kHz hsync
Modeline "640x480"   45.8   640672768864   480488494530 -HSync -VSync
# 640x480 @ 60 Hz, 31.5 kHz hsync
Modeline "640x480"   25.175 640664760800   480491493525
# 640x480 @ 72 Hz, 36.5 kHz hsync
Modeline "640x480"   31.5   640680720864   480488491521
# 640x480 @ 75 Hz, 37.50 kHz hsync
ModeLine"640x480"    31.5   640656720840   480481484500 -HSync -VSync
# 640x480 @ 85 Hz, 43.27 kHz hsync

Modeline "640x480"   36   640696752832   480481484509 -HSync -VSync
# 800x600 @ 100 Hz, 64.02 kHz hsync
Modeline"800x600"    69.65800864928 1088   600604610640 -HSync -VSync
# 800x600 @ 56 Hz, 35.15 kHz hsync
ModeLine "800x600"   36   800824896 1024   600601603625
# 800x600 @ 60 Hz, 37.8 kHz hsync
Modeline "800x600"   40   800840968 1056   600601605628 +hsync +vsync
# 800x600 @ 72 Hz, 48.0 kHz hsync
Modeline "800x600"   50   800856976 1040   600637643666 +hsync +vsync
# 800x600 @ 85 Hz, 55.84 kHz hsync
Modeline"800x600"    60.75800864928 1088   600616621657 -HSync -VSync

# 1024x480 for certain Vaios
Modeline "1024x480"   65 1024 1032 1176 1344 480 491 493 525 -HSync -VSync

# 1024x768 @ 100Hz, 80.21 kHz hsync
Modeline "1024x768"   115.51024 1056 1248 1440768771781802 -HSync -VSync
# 1024x768 @ 60 Hz, 48.4 kHz hsync
Modeline "1024x768"    65    1024 1032 1176 1344   768771777806 -hsync -vsync
# 1024x768 @ 70 Hz, 56.5 kHz hsync
Modeline "1024x768"    75    1024 1048 1184 1328   768771777806 -hsync -vsync
# 1024x768 @ 76 Hz, 62.5 kHz hsync
Modeline "1024x768"    85    1024 1032 1152 1360   768784787823
# 1024x768 @ 85 Hz, 70.24 kHz hsync
Modeline "1024x768"   98.91024 1056 1216 1408   768 782 788 822 -HSync -VSync

# 1152x864 @ 100 Hz, 89.62 kHz hsync
Modeline "1152x864"   137.65 1152 1184 1312 1536   864866885902 -HSync -VSync
# 1152x864 @ 60 Hz, 53.5 kHz hsync
Modeline"1152x864"   89.91152 1216 1472 1680   864868876892 -HSync -VSync
# 1152x864 @ 70 Hz, 62.4 kHz hsync
Modeline"1152x864"   92    1152 1208 1368 1474   864865875895
# 1152x864 @ 78 Hz, 70.8 kHz hsync
Modeline "1152x864"   110   1152 1240 1324 1552   864864876908
# 1152x864 @ 84 Hz, 76.0 kHz hsync
Modeline "1152x864"   135    1152 1464 1592 1776   864864876908

# 1280x960 @ 60 HzModeline "1280x960"   108   1280 1376 1488 1800 960 961 964 1000 +HSync +VSync
# 1280x960 @ 85 HzModeline "1280x960"   148.5 1280 1344 1504 1728 960 961 964 1011+HSync +VSync

# 1280x1024 @ 100 Hz, 107.16 kHz hsync
Modeline "1280x1024"181.75 1280 1312 1440 16961024 1031 1046 1072 -HSync -VSync
# 1280x1024 @ 61 Hz, 64.2 kHz hsync
Modeline "1280x1024"110    1280 1328 1512 17121024 1025 1028 1054
# 1280x1024 @ 70 Hz, 74.59 kHz hsync
Modeline "1280x1024"126.5 1280 1312 1472 16961024 1032 1040 1068 -HSync -VSync
# 1280x1024 @ 74 Hz, 78.85 kHz hsync
Modeline "1280x1024"135    1280 1312 1456 17121024 1027 1030 1064
# 1280x1024 @ 76 Hz, 81.13 kHz hsync
Modeline "1280x1024"135    1280 1312 1416 16641024 1027 1030 1064
# 1280x1024 @ 85 Hz, 91.15 kHz hsync
Modeline "1280x1024"157.51280 1344 1504 17281024 1025 1028 1072 +HSync +VSync

# 1400x1050 @ 60Hz, 65.8 kHz hsync
Modeline "1400x1050"129   1400 1464 1656 1960 1050 1051 1054 1100 +HSync +VSync
# 1400x1050 @ 70Hz, 76.8 kHz hsync
Modeline "1400x1050"151   1400 1464 1656 1960 1050 1051 1054 1100 +HSync +VSync
# 1400x1050 @ 75Hz, 82.3 kHz hsync
Modeline "1400x1050"162   1400 1464 1656 1960 1050 1051 1054 1100 +HSync +VSync
# 1400x1050 @ 85Hz, 93.2 kHz hsync
Modeline "1400x1050"184   1400 1464 1656 1960 1050 1051 1054 1100 +HSync +VSync

# 1600x1200 @ 60Hz, 75.00 kHz hsync
Modeline "1600x1200"162   1600 1664 1856 21601200 1201 1204 1250 +HSync +VSync
# 1600x1200 @ 70 Hz, 87.50 kHz hsync
Modeline "1600x1200"189    1600 1664 1856 21601200 1201 1204 1250 -HSync -VSync
# 1600x1200 @ 75 Hz, 93.75 kHz hsync
Modeline "1600x1200"202.51600 1664 1856 21601200 1201 1204 1250 +HSync +VSync
# 1600x1200 @ 85 Hz, 105.77 kHz hsync
Modeline "1600x1200"220    1600 1616 1808 20801200 1204 1207 1244 +HSync +VSync

# 1800x1440 @ 64Hz, 96.15 kHz hsync
ModeLine "1800X1440"230    1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# 1800x1440 @ 70Hz, 104.52 kHz hsync
ModeLine "1800X1440"250    1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync

# Low-res Doublescan modes
# If your chipset does not support doublescan, you get a 'squashed'
# resolution like 320x400.

# 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio
Modeline "320x200"   12.588 320336384400   200204205225 Doublescan
# 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio
Modeline "320x240"   12.588 320336384400   240245246262 Doublescan
# 320x240 @ 72 Hz, 36.5 kHz hsync
Modeline "320x240"   15.750 320336384400   240244246262 Doublescan
# 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio
ModeLine "400x300"   18   400416448512   300301302312 Doublescan
# 400x300 @ 60 Hz, 37.8 kHz hsync
Modeline "400x300"   20   400416480528   300301303314 Doublescan
# 400x300 @ 72 Hz, 48.0 kHz hsync
Modeline "400x300"   25   400424488520   300319322333 Doublescan
# 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio
ModeLine "480x300"   21.656 480496536616   300301302312 Doublescan
# 480x300 @ 60 Hz, 37.8 kHz hsync
Modeline "480x300"   23.890 480496576632   300301303314 Doublescan
# 480x300 @ 63 Hz, 39.6 kHz hsync
Modeline "480x300"   25   480496576632   300301303314 Doublescan
# 480x300 @ 72 Hz, 48.0 kHz hsync
Modeline "480x300"   29.952 480504584624   300319322333 Doublescan

EndSection


# **********************************************************************
# Graphics device section==by Raymond
# **********************************************************************

# Any number of graphics device sections may be present

Section "Device"
    Identifier      "NV AGP"
    VendorName      "nvidia"
    Driver   "nvidia"
    # update this with the PCI id of your card.Consult the output
    # of the 'lspci' command.The BusID is usually optional when
    # only using one graphics card.
    #BusID       "PCI:1:0:0"

#    VideoRam 256

#    Clocks   25.2 28.3

EndSection

# Device configured by Xconfigurator:
# by Raymond

Section "Device"
    Identifier"NV PCI"
    VendorName"nvidia"
    Driver "nvidia"
    # update this with the PCI id of your card.Consult the output
    # of the 'lspci' command.The BusID is usually optional when
    # only using one graphics card.
    #BusID       "PCI:0:13:0"
EndSection

#by Raymond
Section "Device"
    Identifier "NV AGP TwinView"
    VendorName "nvidia"
    Driver "nvidia"
    # update this with the PCI id of your card.Consult the output
    # of the 'lspci' command. TheBusID is usually optional when
    # only using one graphics card.
    #BusID       "PCI:1:0:0"

    # sample twinview setup
    Option "TwinView"
    # be sure to replace the HorizSync and VertRefresh with correct values
    # for your monitor!
    Option "SecondMonitorHorizSync"   "31-80"
    Option "SecondMonitorVertRefresh" "56-75"
    Option "TwinViewOrientation"      "RightOf"
    Option "MetaModes"                "1280x1024,1280x1024; 1024x768,1024x768"
    Option "ConnectedMonitor"         "crt,crt"
EndSection


##########################################################################
# Screen sections
##########################################################################

#
# screen section for an nvidia AGP card
#
Section "Screen"
    Identifier "Screen AGP"
    Device      "NV AGP"
    Monitor   "MyMonitor"
    DefaultColorDepth 16
    Subsection "Display"
      Depth       8
      Modes       "1280x1024" "1024x768" "800x600" "640x400"
    EndSubsection
    Subsection "Display"
      Depth       16
      Modes       "1280x1024" "1024x768" "800x600" "640x480"
    EndSubsection
    Subsection "Display"
      Depth       24
      Modes       "1280x1024" "1024x768" "800x600" "640x480"
    EndSubsection

EndSection


#
# screen section for an nvidia PCI card
#
Section "Screen"
    Identifier "Screen PCI"
    Device      "NV PCI"
    Monitor   "MyMonitor"
    DefaultColorDepth 16
    Subsection "Display"
      Depth       8
      Modes       "1280x1024" "1024x768" "800x600" "640x400"
    EndSubsection
    Subsection "Display"
      Depth       16
      Modes       "1280x1024" "1024x768" "800x600" "640x480"
    EndSubsection
    Subsection "Display"
      Depth       24
      Modes       "1280x1024" "1024x768" "800x600" "640x480"
    EndSubsection
EndSection

#
# screen section for an nvidia AGP TwinView card
# (look at the appropriate Device section)
#
Section "Screen"
    Identifier "Screen AGP TwinView"
    Device "NV AGP TwinView"
    Monitor "MyMonitor"
    DefaultColorDepth 16
    Subsection "Display"
      Depth       8
      Modes       "1280x1024" "1024x768" "800x600" "640x400"
    EndSubsection
    Subsection "Display"
      Depth       16
      Modes       "1280x1024" "1024x768" "800x600" "640x480"
    EndSubsection
    Subsection "Display"
      Depth       24
      Modes       "1280x1024" "1024x768" "800x600" "640x480"
    EndSubsection
EndSection


##########################################################################
# ServerLayout sections
# (invoke using the '-layout' option of 'startx'.
##########################################################################

#
# just one agp card
#
Section "ServerLayout"
    Identifier"AGP"
    Screen      "Screen AGP"
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
EndSection

#
# just one pci card
#
Section "ServerLayout"
    Identifier"PCI"
    Screen      "Screen PCI"
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
EndSection

#
# 2 cards, non twinview
#
Section "ServerLayout"
    Identifier"Both"
    Screen      "Screen AGP"
    Screen      "Screen PCI" LeftOf "Screen AGP"
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
EndSection

#
# just one agp twinview card
#
Section "ServerLayout"
    Identifier"AGPTwinView"
    Screen      "Screen AGP TwinView"
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
EndSection

#
# 2 cards, one agp twinview and one pci (3 monitors total)
#
Section "ServerLayout"
    Identifier"BothTwinView"
    Screen      "Screen AGP TwinView"
    Screen      "Screen PCI" LeftOf "Screen AGP TwinView"
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
EndSection

lanche 发表于 2004-12-12 16:08:27

显示器选择 逐行svga 1028x768 65HZ ，再试试。

kde2000 发表于 2004-12-12 17:00:04


# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

HorizSync 31-80

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

VertRefresh 56-75


垂直刷新率太低了，改成45-160

diamond99 发表于 2004-12-13 21:19:09

ok, i have solved this problem.

thank you anyway
页: [1]
查看完整版本: redhat7.2下配置液晶显示器分辨率的问题