<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0">
  <channel>
    <title>中国Linux公社论坛 - Skyeye项目专栏</title>
    <link>https://forum.linuxfans.org/forum.php?mod=forumdisplay&amp;fid=58</link>
    <description>Latest 20 threads of Skyeye项目专栏</description>
    <copyright>Copyright(C) 中国Linux公社论坛</copyright>
    <generator>Discuz! Board by Discuz! Team</generator>
    <lastBuildDate>Wed, 10 Jun 2026 01:46:24 +0000</lastBuildDate>
    <ttl>10</ttl>
    <image>
      <url>https://forum.linuxfans.org/static/image/common/logo_88_31.gif</url>
      <title>中国Linux公社论坛</title>
      <link>https://forum.linuxfans.org/</link>
    </image>
    <item>
      <title>请问ARM966E-S这个核的开发板模拟时cpu和mach该怎么填写</title>
      <link>https://forum.linuxfans.org/forum.php?mod=viewthread&amp;tid=200676</link>
      <description><![CDATA[如图，手册上也没可查询的]]></description>
      <category>Skyeye项目专栏</category>
      <author>wdyichen</author>
      <pubDate>Tue, 06 Jun 2017 08:54:33 +0000</pubDate>
    </item>
    <item>
      <title>[转载]ubuntu server 12.04上的skyeye135安装(最精确安装步骤和注意</title>
      <link>https://forum.linuxfans.org/forum.php?mod=viewthread&amp;tid=200354</link>
      <description><![CDATA[ubuntu server 12.04上的skyeye1.3.5安装和使用(打造最精确的安装步骤和注意事项)
http://www.ithao123.cn/content-686371.html

1、环境介绍

ubuntu版本:12.04 (cat /etc/issue 或lsb_release -a查看）

root@xumin:~# lsb_release -a

No LSB modules are available. ...]]></description>
      <category>Skyeye项目专栏</category>
      <author>ksh</author>
      <pubDate>Fri, 01 Jul 2016 02:44:21 +0000</pubDate>
    </item>
    <item>
      <title>help!   skyeye1.3.5运行skyeye-testsuite-1.3.4的 linux/mpc8560 失败</title>
      <link>https://forum.linuxfans.org/forum.php?mod=viewthread&amp;tid=200337</link>
      <description><![CDATA[Hi, I\'m sorry, I want to use skyeye to simulate powerpc, but I get some error.
Platform Ubuntu14.04(64bits)
skyeye version is 1.3.5
mpc8560, mpc8572, mpc8641d, these three testcases in \&quot;skyeye-testsuite-1.3.4_rc1/linux\&quot; can\'t pass.
I use the defau]]></description>
      <category>Skyeye项目专栏</category>
      <author>gaojin987</author>
      <pubDate>Thu, 05 May 2016 07:19:24 +0000</pubDate>
    </item>
    <item>
      <title>msys2+mingw32编译skyeye 1.3.5出错，怎么解决？</title>
      <link>https://forum.linuxfans.org/forum.php?mod=viewthread&amp;tid=200113</link>
      <description><![CDATA[用msys2+mingw32编译skyeye 1.3.5出现错误
执行autogen.sh
出现libtoolize:   error: AC_CONFIG_MACRO_DIRS([libltdl/m4]) conflicts with ACLOCAL_AMFLAGS=-I m4.
autoreconf: libtoolize failed with exit status: 1
mingw32为msys2内置的4.9.2版，
《《我用QT5.5.0带 ...]]></description>
      <category>Skyeye项目专栏</category>
      <author>xxlwsj</author>
      <pubDate>Sun, 09 Aug 2015 01:18:38 +0000</pubDate>
    </item>
    <item>
      <title>skyeye 1.35 make install 出错</title>
      <link>https://forum.linuxfans.org/forum.php?mod=viewthread&amp;tid=199702</link>
      <description><![CDATA[skyeye 1.35 make install 出错
sparc_hello 文件找不到  我拷贝一个到对应目录下 在make install 的时候又会被删除，，最后报错ar
arm_hello 文件倒是生成了

CONF文件夹也没生成

如果直接运行opt/skyeye/bin/skyeye  会提示 no cli found
求教。。。[qq]345824761[/q ...]]></description>
      <category>Skyeye项目专栏</category>
      <author>gcbb</author>
      <pubDate>Sat, 18 Oct 2014 16:45:51 +0000</pubDate>
    </item>
    <item>
      <title>安装MSYS 下SKYEYE1.35 报LIBCOMMON.LA什么错误</title>
      <link>https://forum.linuxfans.org/forum.php?mod=viewthread&amp;tid=199701</link>
      <description><![CDATA[我在官网下的MSYS MINGW SKYEYE1.35  安装skyeye 在MAKE的时候报错。。百度了没找到有效解决方案求教]]></description>
      <category>Skyeye项目专栏</category>
      <author>gcbb</author>
      <pubDate>Fri, 17 Oct 2014 16:33:15 +0000</pubDate>
    </item>
    <item>
      <title>skyeye 运行s3c6410错误</title>
      <link>https://forum.linuxfans.org/forum.php?mod=viewthread&amp;tid=199661</link>
      <description><![CDATA[使用skyeye1.3.4-rc1，运行testsuite-1.3.4-rc1里面的s3c6410_lcd是成功的。
现想自己编译linux kernel：
toolchain：使用Sourcery G++ Lite 2010q1-202 for ARM GNU/Linux
kernel：官网上的 linux-2.6.35.tar.bz2
kernel的boot args设置为：
      console=ttySAC0,115 ...]]></description>
      <category>Skyeye项目专栏</category>
      <author>give</author>
      <pubDate>Wed, 10 Sep 2014 03:44:57 +0000</pubDate>
    </item>
    <item>
      <title>如何根据编译出来的romfs，配置对应的mem_bank?</title>
      <link>https://forum.linuxfans.org/forum.php?mod=viewthread&amp;tid=199658</link>
      <description><![CDATA[我用的是uClinux2008,skyeye模拟的是at91x40, 编译uClinux得到的Romfs输出如下：
0    ROMdisk              [0xffffffff, 0xffffffff] 37777777777, sz     0, at 0x0     
1    .                    [0x801     , 0x152ef   ] 0040755, sz     0, at 0x20    
1    . ...]]></description>
      <category>Skyeye项目专栏</category>
      <author>nxbtch</author>
      <pubDate>Sun, 07 Sep 2014 09:07:52 +0000</pubDate>
    </item>
    <item>
      <title>求助！关于uart端读数据</title>
      <link>https://forum.linuxfans.org/forum.php?mod=viewthread&amp;tid=199651</link>
      <description><![CDATA[我用的是skyeye-sparc
如何从uart终端读入数据啊！
求助大神啊，给个程序例子看看]]></description>
      <category>Skyeye项目专栏</category>
      <author>wlguyu1985@126</author>
      <pubDate>Thu, 28 Aug 2014 00:46:43 +0000</pubDate>
    </item>
    <item>
      <title>请教ubuntu 10.04安装skyeye如何模拟s3c6410?</title>
      <link>https://forum.linuxfans.org/forum.php?mod=viewthread&amp;tid=199629</link>
      <description><![CDATA[目前我在ubuntu 10.04安装skyeye1.3.4,可以模拟s3c2440,但是s3c6410一直都不成功.试过装skyeye 1.3.5,效果更差,请问有人尝试过模拟s3c6410么?难道是我安装的有问题?
针对1.3.4目前是这样安装的
1.安装依赖包:
sudo apt-get install libgtk2.0-dev pkg-config libatk1.0- ...]]></description>
      <category>Skyeye项目专栏</category>
      <author>lovelr1209</author>
      <pubDate>Tue, 05 Aug 2014 13:06:43 +0000</pubDate>
    </item>
    <item>
      <title>为啥我新编译的skyeye1.3.5rc不能打开gdb啊？</title>
      <link>https://forum.linuxfans.org/forum.php?mod=viewthread&amp;tid=199422</link>
      <description><![CDATA[没有提示gdb已打开，也连不上
请问这是啥原因？ 谢谢！

# skyeye -n -e hello -d 
SkyEye 1.3.5
SkyEye is an Open Source project under GPL. All rights of different parts or modules are reserved by their author. Any modification or redistributions of SkyEy ...]]></description>
      <category>Skyeye项目专栏</category>
      <author>comealong</author>
      <pubDate>Tue, 18 Mar 2014 01:27:47 +0000</pubDate>
    </item>
    <item>
      <title>编译过程中出现Python-conf：cannot found</title>
      <link>https://forum.linuxfans.org/forum.php?mod=viewthread&amp;tid=199414</link>
      <description><![CDATA[按照官网上的步骤，在编译时出现这个问题，即使make install 之后运行skyeye 出现 no cli found 求解答，我已经在电脑上反复装了好多次，都是这个问题，无法解决！！]]></description>
      <category>Skyeye项目专栏</category>
      <author>yiluhangxing</author>
      <pubDate>Fri, 07 Mar 2014 02:36:53 +0000</pubDate>
    </item>
    <item>
      <title>cygwin 安装skyeye-1.3.5_rc1  头疼问题，求高手指点</title>
      <link>https://forum.linuxfans.org/forum.php?mod=viewthread&amp;tid=199361</link>
      <description><![CDATA[反反复复安装了，好多次skyeye ，在这一步通不过去，提示以下信息
misc/exec_info.c: 在函数‘set_tables’中:
misc/exec_info.c:287:2: 错误：‘AT_CLKTCK’未声明(在此函数内第一次使用)
misc/exec_info.c:287:2: 附注：每个未声明的标识符在其出现的函数内只报告一次 ...]]></description>
      <category>Skyeye项目专栏</category>
      <author>xxx7597</author>
      <pubDate>Tue, 07 Jan 2014 04:48:37 +0000</pubDate>
    </item>
    <item>
      <title>MinGW configure阶段编译失败，怎么回事？</title>
      <link>https://forum.linuxfans.org/forum.php?mod=viewthread&amp;tid=199271</link>
      <description><![CDATA[$ ./configure
checking build system type... i686-pc-mingw32
checking host system type... i686-pc-mingw32
checking target system type... i686-pc-mingw32
checking for a BSD-compatible install... /bin/install -c
checking whether build environment is san]]></description>
      <category>Skyeye项目专栏</category>
      <author>thinke365</author>
      <pubDate>Sun, 13 Oct 2013 19:17:03 +0000</pubDate>
    </item>
    <item>
      <title>大家好，skyeye1.3.4是不是有bug</title>
      <link>https://forum.linuxfans.org/forum.php?mod=viewthread&amp;tid=199223</link>
      <description><![CDATA[我用skyeye1.3.4模拟s3c2440的板子 中断产生了可是读取下面这三个寄存器中值 无论什么发生什么中断，三个寄存器中的值都为0
INTOFFSET 0x4a000014
INTPND 0x4a000010
SRCPND 0x4a000000]]></description>
      <category>Skyeye项目专栏</category>
      <author>pdlenovo</author>
      <pubDate>Fri, 23 Aug 2013 12:46:24 +0000</pubDate>
    </item>
    <item>
      <title>ucos4skyeye中断安装函数有点不理解</title>
      <link>https://forum.linuxfans.org/forum.php?mod=viewthread&amp;tid=199184</link>
      <description><![CDATA[void install_irqhandler(void * isr)
{
        /* ARM irq exception vector addr is 0x00000018  */
        unsigned int * irq_vec_addr = ( unsigned int * ) 0x18;

        /* this is isr entry address, could be another address like 0x3c, 0x58... */
]]></description>
      <category>Skyeye项目专栏</category>
      <author>loonux</author>
      <pubDate>Tue, 23 Jul 2013 03:00:15 +0000</pubDate>
    </item>
    <item>
      <title>在用skyeye模拟s3c2410的中断服务出现问题</title>
      <link>https://forum.linuxfans.org/forum.php?mod=viewthread&amp;tid=199181</link>
      <description><![CDATA[中断服务程序能够正常运行，但有个问题是不管什么类型的中断，INTOFFSET寄存器中的中断类型值都是15。。这是那地方出现问题了呢？而15号中断源在2410上是uart2，但我的程序中没有任何与uart2有关的操作。。

求各位大侠帮忙。。 ...]]></description>
      <category>Skyeye项目专栏</category>
      <author>loonux</author>
      <pubDate>Fri, 19 Jul 2013 16:23:33 +0000</pubDate>
    </item>
    <item>
      <title>求助：用arm-elf-gdb调试的时候老是出现错误</title>
      <link>https://forum.linuxfans.org/forum.php?mod=viewthread&amp;tid=199169</link>
      <description><![CDATA[我在调试一个测试代码，在skyeye上是可以正常运行的。
但是通过arm-elf-gdb链接skyeye进行调试的时候，运行“run”会出现一个错误，如下所示：
gdb输入和输出：

(gdb) target remote 127.0.0.1:12345
Remote debugging using 127.0.0.1:12345
0x1000000 in begin ()
(g ...]]></description>
      <category>Skyeye项目专栏</category>
      <author>loonux</author>
      <pubDate>Fri, 12 Jul 2013 11:50:00 +0000</pubDate>
    </item>
    <item>
      <title>本人终于成功的用uboot引导uimage把kernel启动起来了</title>
      <link>https://forum.linuxfans.org/forum.php?mod=viewthread&amp;tid=199146</link>
      <description><![CDATA[本人终于成功的用uboot引导uimage把kernel启动起来了，立贴记念。虽然kernel的解压速度和启动速度超慢……]]></description>
      <category>Skyeye项目专栏</category>
      <author>ajq1987</author>
      <pubDate>Thu, 27 Jun 2013 10:40:21 +0000</pubDate>
    </item>
    <item>
      <title>skyeye 运行zImage的问题</title>
      <link>https://forum.linuxfans.org/forum.php?mod=viewthread&amp;tid=199145</link>
      <description><![CDATA[大家都知道zImage是由压缩后的vmlinux通过object copy得到的。由于压缩后的vmlinux是PIC(地址无关的压缩)，那么zImage的执行地址应该是0x00啊，请问在skyeye如何运行zImage?]]></description>
      <category>Skyeye项目专栏</category>
      <author>ajq1987</author>
      <pubDate>Thu, 27 Jun 2013 01:24:35 +0000</pubDate>
    </item>
  </channel>
</rss>