请问怎样调显示器的刷新频率？

hngjnfng

# File generated by anaconda.

Section "ServerLayout"
        Identifier     "Anaconda Configured"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Mouse1" "SendCoreEvents"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
        RgbPath      "/usr/X11R6/lib/X11/rgb"
        FontPath     "unix/:7100"
EndSection

Section "Module"
        Load  "dbe"
        Load  "extmod"
        Load  "fbdevhw"
        Load  "dri"
        Load  "glx"
        Load  "record"
        Load  "freetype"
        Load  "type1"
EndSection

Section "InputDevice"
#        Option        "AutoRepeat"        "500 5"
# when using XQUEUE, comment out the above line, and uncomment the
# following line
#        Option        "Protocol"        "Xqueue"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#        Option        "Xleds"                "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#        Option        "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#        Option        "XkbModel"        "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#        Option        "XkbModel"        "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#        Option        "XkbLayout"        "de"
# or:
#        Option        "XkbLayout"        "de"
#        Option        "XkbVariant"        "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#        Option        "XkbOptions"        "ctrl:swapcaps"
        #Option        "XkbOptions"        ""
        Identifier  "Keyboard0"
        Driver      "keyboard"
        Option            "XkbRules" "xfree86"
        Option            "XkbModel" "pc105"
        Option            "XkbLayout" "us"        #Option        "XkbVariant"        ""
EndSection

Section "InputDevice"
        Identifier        "Mouse0"
        # Modified by mouseconfig
        Driver                "mouse"
        Option                "Device"                "/dev/mouse"
        Option                "Protocol"                "IntelliMouse"
        Option                "Emulate3Buttons"        "yes"
        Option                "ZAxisMapping"                "4 5"
EndSection

Section "InputDevice"
        Identifier  "Mouse1"
        Driver      "mouse"
        Option            "Device" "/dev/input/mice"
        Option            "Protocol" "IMPS/2"
        Option            "Emulate3Buttons" "no"
        Option            "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "Acer 57c"
        HorizSync    30.0 - 70.0
        VertRefresh  50.0 - 120.0
        Option            "dpms"
EndSection

Section "Device"
        # no known options
        #BusID
        Identifier  "NVIDIA GeForce 2 MX (generic)"
        Driver      "nv"
        VendorName  "NVIDIA GeForce 2 MX (generic)"
        BoardName   "NVIDIA GeForce 2 MX (generic)"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "NVIDIA GeForce 2 MX (generic)"
        Monitor    "Monitor0"
        DefaultDepth     24
        SubSection "Display"
                Depth     24
                Modes    "1024x768" "800x600" "640x480"
        EndSubSection
EndSection

Section "DRI"
        Mode         0666
EndSection



this is mine,how to modify?
thanks

langzigyb

我的也是这种情况,XF86Config如下:
Section "Screen"
        Identifier "Screen0"
        Device     "SiS 630"
        Monitor    "Monitor0"
        DefaultDepth     24
        SubSection "Display"
                Depth     24
                Modes    "1024x768@85" "800x600" "640x480"
        EndSubSection
EndSection
屏幕依然很闪!

do77

装好显卡驱动再试试

jtzzr

大家好！
　　我的XF86Config中的显示频率是这样设置的，因为我使用的是TurboLinux6.0，贴出来仅供参考：

Section "Monitor"

    Identifier        "Sony CPD 100SF"
    VendorName        "Sony"
    ModelName        "CPD 100SF"
    HorizSync   30-72
    VertRefresh 50-120


# 1024x768 @ 85 Hz, 70.24 kHz hsync
Modeline "1024x768"   98.9  1024 1056 1216 1408   768 782 788 822 -HSync -VSync
# 1024x768 @ 100Hz, 80.21 kHz hsync
# Modeline "1024x768"   115.5  1024 1056 1248 1440  768  771  781  802 -HSync -VSync


# 800x600 @ 85 Hz, 55.84 kHz hsync
Modeline  "800x600"    60.75  800  864  928 1088   600  616  621  657 -HSync -VSync
# 800x600 @ 100 Hz, 64.02 kHz hsync
# Modeline  "800x600"    69.65  800  864  928 1088   600  604  610  640 -HSync -VSync


# 640x480 @ 85 Hz, 43.27 kHz hsync
Modeline "640x480"     36     640  696  752  832   480  481  484  509 -HSync -VSync
# 640x480 @ 100 Hz, 53.01 kHz hsync
# Modeline "640x480"     45.8   640  672  768  864   480  488  494  530 -HSync -VSync

　　我的显示器当然不是什么SONY，只是摆摆面子 ，不过带宽能达到160MHz多点，刷到100Hz也没有问题，不过我还是使用85Hz，所以100Hz的都打上了注释。

rainbine

我也有同样的问题，看到楼主的问题好像还没有解决，那位高人指点一下，
我装的是redhat9.0，845G主板集成显卡，主板驱动已经安装，
.....
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Acer 57c"
HorizSync 30.0 - 70.0
VertRefresh 50.0 - 160.0
Option "dpms"
EndSection
....
Section "Device"
Identifier  "Videocard0"
Driver      "i810"                 （此处仍显示使用 i810_drv.o的驱动程序）
VendorName  "Videocard vendor"
BoardName   "Intel 845"
EndSection
....
Section "Screen"
Identifier "Screen0"
Device "i 810"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection

xfree86config文件大体是这样，我没在linux下面，太费眼了。具体怎么改，有没有成功的。
高手救命！！！