VIVI version 0.1.4 ([email protected]) (gcc version 2.95.2 20000516 (re
lease) [Rebel.com]) #0.1.4 五 3月 11 14:47:50 CST 2005
MMU table base address = 0x33DFC000
Succeed memory mapping.
NAND device: Manufacture ID: 0xec, Chip ID: 0x76 (Samsung K9D1208V0M)
Could not found stored vivi parameters. Use default vivi parameters.
GPFCON=43434
GPFCON=43434
boot_delay=16777216
boot_delay=16777
Press Return to start the LINUX now, any other key for vivi
Copy linux kernel from 0x00030000 to 0x30008000, size = 0x000c0000 ... done
zImage magic = 0x016f2818
Setup linux parameters at 0x30000100
linux command line is: "noinitrd root=/dev/bon/2 init=/linuxrc console=ttyS0"
MACH_TYPE = 193
NOW, Booting Linux......
Uncompressing Linux................................................. done, booti
ng the kernel.
Linux version 2.4.18-rmk7-pxa1 ([email protected]) (gcc version 2.95.2
20000516 (release) [Rebel.com]) #108 日 7月 10 20:21:48 CST 2005
CPU: ARM/CIRRUS Arm920Tsid(wb) revision 0
Machine: Samsung-SMDK2410
smdk_map_io()
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: noinitrd root=/dev/bon/2 init=/linuxrc console=ttyS0
DEBUG: timer count 15626
Console: colour dummy device 80x30
Calibrating delay loop... 99.94 BogoMIPS
Memory: 64MB = 64MB total
Memory: 62804KB available (1294K code, 305K data, 64K init)
Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
CPU clock = 200.000 Mhz, HCLK = 100.000 Mhz, PCLK = 50.000 Mhz
Starting kswapd
devfs: v1.10 (20020120) Richard Gooch ([email protected])
devfs: boot_options: 0x1
ttyS%d0 at I/O 0x50000000 (irq = 52) is a S3C2410
ttyS%d1 at I/O 0x50004000 (irq = 55) is a S3C2410
ttyS%d2 at I/O 0x50008000 (irq = 5 is a S3C2410
test lcd start 0719
testing the lcd by softmcu
testing the lcd by softmcu
Console: switching to colour frame buffer device 80x60
Installed S3C2410 frame buffer
pty: 256 Unix98 ptys configured
s3c2410-ts initialized
S3C2410 Real Time Clock Driver v0.1
block: 128 slots per queue, batch=32
eth0: cs8900 rev K(3.3 Volts) found at 0xd0000300
cs89x0 media RJ-45, IRQ 37
init_mtd\\\\\\\
mtd_notifier=-1072228800
1111111111111111
222222222222222222222222
444444444444
5555555555
mtd_notifier=-1072228612
1111111111111111
222222222222222222222222
444444444444
5555555555
s3c2410_nand_init
init bon
mtd_notifier=-1072226616
1111111111111111
222222222222222222222222
444444444444
5555555555
s3c2410_nand_init11111111111
s3c2410_nand_init22222222222222
s3c2410_nand_init33333333333333
NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit
)
s3c2410_nand_init444444444444444
add_mtd_device1111111111111
add_mtd_device2222222222
mtd_table=0add_mtd_device3333333333333333
add_mtd_dev444444444444444444
add_mtd_device444444444444111111111111111111:w
list_for_eac...
not-add=-1072912424.......
bon_notify_add 0
bon0: 00000000-00030000 (00030000) 00000000
bon1: 00030000-00100000 (000d0000) 00000000
bon2: 00100000-00a00000 (00900000) 00000000
bon3: 00a00000-03ffc000 (035fc000) 00000000
list_for_eac...
not-add=-1072930820.......
list_for_eac...
not-add=-1072937212.......
add_mtd_device5555555555555555555
NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit
)
Creating 2 MTD partitions on "NAND 64MiB 3,3V 8-bit":
0x00100000-0x00400000 : "root"
add_mtd_device1111111111111
add_mtd_device2222222222
mtd_table=-1069652992add_mtd_device2222222222
mtd_table=0add_mtd_device3333333333333333
add_mtd_dev444444444444444444
add_mtd_device444444444444111111111111111111:w
list_for_eac...
not-add=-1072912424.......
bon_notify_add 1
list_for_eac...
not-add=-1072930820.......
list_for_eac...
not-add=-1072937212.......
add_mtd_device5555555555555555555
0x00400000-0x01d00000 : "user"
add_mtd_device1111111111111
add_mtd_device2222222222
mtd_table=-1069652992add_mtd_device2222222222
mtd_table=-1069651456add_mtd_device2222222222
mtd_table=0add_mtd_device3333333333333333
add_mtd_dev444444444444444444
add_mtd_device444444444444111111111111111111:w
list_for_eac...
not-add=-1072912424.......
bon_notify_add 1
list_for_eac...
not-add=-1072930820.......
list_for_eac...
not-add=-1072937212.......
add_mtd_device5555555555555555555
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
VFS: Mounted root (cramfs filesystem).
Mounted devfs on /dev
Freeing init memory: 64K
mount /etc as ramfs
re-create the /etc/mtab entries
console=/dev/co顂ole
init started: BusyBox v0.60.3 (2002.05.13-08:36+0000) multi-cal binary
Starting pid 16, console /dev/console: '/etc/init.d/rcS'
modprobe: Can't locate module s3c2410-ts
UDA1341 audio driver initialized
Starting PCMCIA services: modulesLinux Kernel Card Services 3.1.22
options: none
cs.c 1.279 2001/10/13 00:08:28 (David Hinds)
i82365.c 1.265 1999/11/10 18:36:21 (David Hinds)
Intel PCIC probe:
<NULL> ISA-to-PCMCIA at port 0x3e0 ofs 0x00, 1 socket
host opts [0]: none
status change on irq 3
cs: register_ss_entry(1, 0xc4923324)
cs: pcmcia_register_socket(0xc4923324)
i82365: SetSocket(0, flags 0x000, Vcc 0, Vpp 0, io_irq 0, csc_mask 0x80)
i82365: SetIOMap(0, 0, 0x00, 0 ns, 0x0000-0x0001)
i82365: SetIOMap(0, 1, 0x00, 0 ns, 0x0000-0x0001)
i82365: SetMemMap(0, 0, 0x00, 0 ns, 0x00000-0x01000, 0x00000)
i82365: SetMemMap(0, 1, 0x00, 0 ns, 0x00000-0x01000, 0x00000)
i82365: SetMemMap(0, 2, 0x00, 0 ns, 0x00000-0x01000, 0x00000)
i82365: SetMemMap(0, 3, 0x00, 0 ns, 0x00000-0x01000, 0x00000)
i82365: SetMemMap(0, 4, 0x00, 0 ns, 0x00000-0x01000, 0x00000)
ds.c 1.112 2001/10/13 00:08:28 (David Hinds)
cs: bind_device(): client 0xc03e8460, sock 0, dev Driver Services
i82365: GetStatus(0) = 0x0020
cs: register_client(): client 0xc03e8460, sock 0, dev Driver Services
cardmgr.
cardmgr[41]: starting, version is 3.1.22
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
IDE INIT
BWSCON:0x224ddd10
BANKCON4:0x7ffc
GPHCON:26aaaa
ide_init_hwif_ports!
hw->io_ports[0]=d4000020
hw->io_ports[1]=d4000022
hw->io_ports[2]=d4000024
hw->io_ports[3]=d4000026
hw->io_ports[4]=d4000028
hw->io_ports[5]=d400002a
hw->io_ports[6]=d400002c
hw->io_ports[7]=d400002e
ide_init_hw_if_ports=d400010c
ds_open(socket 0)
ds_open(socket 1)
ds_open(socket 1)
cardmgr[41]: watdhing 1 sockets
s_ioctl(socket 0, 0x80146401, 0xbffffc2
ds_ioctl(socket 0, 0xc0186402, 0x2027310)
ds_ioctl(socket 0, 0xc0186402, 0x2026440)
ds_ioctl(socket 0, 0xc0186402, 0x2026420)
ds_poll(socket 0)
ds_poll(socket 0)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
Initializing S3C2410 buffer pool for DMA workaround
usb-ohci.c: USB OHCI at membase 0xe9000000, IRQ 26
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
SCSI subsystem driver Revision: 1.00
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
usb.c: registered new driver keyboard
usbkbd.c: :USB HID Boot Protocol keyboard driver
usb.c: registered new driver usb_mouse
usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
date: invalid date `090231832081'
yaffs: dev is 7938 name is "1f:02"
mount: Mounting /dev/hda on /tmp/ide failed: No such file or directory
mount: Mounting /dev/sda1 on /tmp/u failed: No such file or directory
hub.c: Cannot enable port 2 of hub 1, disabling port.
hub.c: Maybe the USB cable is bad?
madvise of shared memory: Function not implemented
madvise error with marking shared memory pages as not needed
modprobe: modprobe: Can't locate module net-pf-23
Warning: could not register server
pc : [<00008000>] lr : [<8067b830>] Not tainted
sp : bffff62c ip : 3ff00000 fp : bffff6f8
r10: 60000000 r9 : 3fea723f r8 : 00008000
r7 : 60000000 r6 : 3fea723f r5 : 30c9baed r4 : bfb7925d
r3 : 3ff00000 r2 : 000003ff r1 : 40669840 r0 : 00000000
Flags: nzCv IRQs on FIQs on Mode USER_32 Segment user
Control: C000317F Table: 33D30000 DAC: 00000015
Aborted
Waiting for enter to start '/bin/sh' (pid 86, terminal /dev/console)
Please press Enter to activate this console. ^@
Please press Enter to activate this console. ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@
Starting pid 86, console /dev/console: '/bin/sh'
BusyBox v0.60.3 (2002.05.13-08:36+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands. |
IP卡
狗仔卡
发表于 2005-11-25 09:33:56
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
显身卡