QQ登录

只需一步,快速开始

 找回密码
 注册

QQ登录

只需一步,快速开始

查看: 1089|回复: 2

用pppoe现在拨不上号了(debian系统)

[复制链接]
发表于 2005-11-27 17:50:37 | 显示全部楼层 |阅读模式
用120M的ISO安装的,刚装上用PPPOE还能拨上号,然后装了KDE及一些其他的东西,然后重起后就不行了,信息是

XXX:~# ifconfig
eth0      Link encap:Ethernet  HWaddr 00:11:2F:8B:E9:A0
          inet addr:192.168.0.5  Bcast:192.168.0.255  Mask:255.255.255.0
          inet6 addr: fe80::211:2fff:fe8b:e9a0/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:215 errors:0 dropped:0 overruns:0 frame:0
          TX packets:377 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:29764 (29.0 KiB)  TX bytes:22698 (22.1 KiB)
          Interrupt:209 Base address:0xd800

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:107 errors:0 dropped:0 overruns:0 frame:0
          TX packets:107 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:8867 (8.6 KiB)  TX bytes:8867 (8.6 KiB)

ppp0      Link encapoint-to-Point Protocol
          inet addr:211.148.72.194  P-t-P:211.148.72.1       Mask:255.255.255.255
          UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1492  Metric:1
          RX packets:4 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:3
          RX bytes:117 (117.0 b)  TX bytes:54 (54.0 b)

zsh:~# plog
Nov 27 16:33:09 zsh pppd[3324]: Couldn't increase MRU to 1500
Nov 27 16:33:09 zsh pppd[3324]: Remote message: Successfully
Nov 27 16:33:09 zsh pppd[3324]: PAP authentication succeeded
Nov 27 16:33:09 zsh pppd[3324]: peer from calling number 00:E0:FC:0A:94:EB authorized
Nov 27 16:33:09 zsh pppd[3324]: not replacing default route to eth0 [192.168.0.1]
Nov 27 16:33:09 zsh pppd[3324]: Cannot determine ethernet address for proxy ARP
Nov 27 16:33:09 zsh pppd[3324]: local  IP address 211.148.72.194
Nov 27 16:33:09 zsh pppd[3324]: remote IP address 211.148.72.1
Nov 27 16:33:09 zsh pppd[3324]: primary   DNS address 211.148.126.2
Nov 27 16:33:09 zsh pppd[3324]: secondary DNS address 218.2.135.1
 楼主| 发表于 2005-11-27 17:56:53 | 显示全部楼层
Nov 27 16:33:09 zsh pppd[3324]: not replacing default route to eth0 [192.168.0.1]
Nov 27 16:33:09 zsh pppd[3324]: Cannot determine ethernet address for proxy ARP


用route add default gw....的方法也不行,以前用re-pppoe3.5现在装不上,缺少gcc,cc,所以只能还是用debian自带的这个,请问还有其他办法解决吗,还是我做的少了哪些步骤
回复

使用道具 举报

发表于 2005-11-28 10:41:48 | 显示全部楼层
以下文章供参考, 可能是ppoeconf的bug. ubuntu和debian的配置文件应该是相同的.

http://ubuntuforums.org/archive/index.php/t-75687.html

# added by pppoeconf
auto eth0
iface eth0 inet manual

pre-up /sbin/ifconfig eth0 up # line maintained by pppoeconf


comented out that iface eth0 inet static section and added the line iface eth0 inet manual after auto eth0. Hope it helps.
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

GMT+8, 2024-3-29 14:03 , Processed in 0.059009 second(s), 15 queries .

© 2021 Powered by Discuz! X3.5.

快速回复 返回顶部 返回列表