宽屏用户注意

KDE · 发表于 2006-8-1 05:43:17

为了更好地改进对宽屏显示器的支持，请大家在这里跟帖列举自己的宽屏显示器在 win 下的分辨率。

Jeff-cao · 发表于 2006-8-1 09:11:43

我的本本是1280*768的宽屏.

www1862 · 发表于 2006-8-1 09:23:02

我的是1440x900

MichaelBibby · 发表于 2006-8-1 09:45:20

1280x800
附 xorg.conf：
[code:1]

# XFree86 4 configuration created by MagicInstaller.

Section "ServerLayout"
      Identifier    "Default Layout"
      Screen    0 "Screen0" 0 0
      InputDevice    "Mouse0" "CorePointer"
      InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
      RgbPath       "/usr/X11R6/lib/X11/rgb"
      FontPath       "/usr/X11R6/lib/X11/fonts/misc:unscaled"
      FontPath       "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
      FontPath       "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
      FontPath       "/usr/X11R6/lib/X11/fonts/misc"
      FontPath       "/usr/X11R6/lib/X11/fonts/Type1"
      FontPath       "/usr/X11R6/lib/X11/fonts/cyrillic"
      FontPath       "/usr/X11R6/lib/X11/fonts/TTF"
      FontPath       "/usr/X11R6/lib/X11/fonts/TrueType"
      FontPath       "/usr/share/fonts/default/Type1"
FontPath "/usr/share/fonts/ttf/zh_CN"

EndSection

Section "Module"
      Load "dbe"
      Load "extmod"
      Load "fbdevhw"
      Load "glx"
      Load "record"
      Load "freetype"
      Load "type1"
EndSection

Section "InputDevice"
      Identifier    "Keyboard0"
      Driver       "keyboard"
      Option       "XkbRules" "xfree86"
      Option       "XbkModel" "pc105"
      Option       "XkbLayout" "us"
EndSection

Section "InputDevice"
      Identifier    "Mouse0"
      Driver       "mouse"
      Option       "Protocol" "IMPS/2"
      Option       "Device" "/dev/input/mice"
      Option       "ZAxisMapping" "4 5"
      Option       "Emulate3Buttons" "no"
EndSection

Section "Monitor"
      Identifier    "Monitor0"
      VendorName    "Monitor Vendor"
      ModelName    "Unknown monitor"
      HorizSync    28-60
      VertRefresh    48-64
EndSection

Section "Device"
      Identifier    "Videocard0"
      Driver       "vesa"
      VendorName    "Videocard vendor"
      BoardName    "VESA driver (generic)"
      VideoRam       1024
EndSection

Section "Screen"
      Identifier    "Screen0"
      Device       "Videocard0"
      Monitor       "Monitor0"
      DefaultDepth 24
SubSection "Display24"
Depth 24
Modes "1280x800"
EndSubSection
EndSection
[/code:1]

jiangtao9999 · 发表于 2006-8-1 17:59:38

MI 加一个手动添加吧～～～
之后在加一个首选的分辨率，放到 xorg.conf 里的第一个。
这样 X 启动后分辨率就自动到第一个，其他的分辨率也都支持。
用 WINE 模拟游戏的话，也能自动切换分辨率。

lanzinc · 发表于 2006-8-2 18:32:25

KDE，想建一个显示模式的数据库是吗？

请教一下，光知道win 下的分辨率是不是不够？

在xorg.conf内用
modes "1024x768"
能指定分辨率为1024x768，是因为xorg内建了“1024x768"这个索引(built-in VESA standard modes)，或者在xorg.conf中用modeline或mode建立了一个索引。
在这里"1024x768"其实只是一个名字
如果：
我们定义
ModeLine    "800x600" 94.5 1024 1088 1184 1376 768 769 772 808 +hsync +vsync
而不是
ModeLine    "1024x768" 94.5 1024 1088 1184 1376 768 769 772 808 +hsync +vsync
的话
要显示1024x768就应该是
modes "800x600"了
当然也可以
ModeLine    "babymode" 94.5 1024 1088 1184 1376 768 769 772 808 +hsync +vsync
然后
Modes "babymode"

对于xorg没有built-in的显示模式
光知道分辨率有办法通过计算在xorg.conf用ModeLine (或 Mode )建显示模式索引吗?

对于ModeLine
我的资料这样说的:

   ModeLine  "name" mode-description
            This entry is a more compact version of the Mode entry,  and  it
            also  can  be used to specify video modes for the monitor.  is a
            single line format for specifying video modes. In  most  cases
            this  isn't  necessary because the built-in set of VESA standard
            modes will be sufficient.

            The mode-description is in four sections,  the  first  three  of
            which  are mandatory.  The first is the dot (pixel) clock.  This
            is a single number specifying the pixel clock rate for the  mode
            in MHz.  The second section is a list of four numbers specifying
            the horizontal timings.  These numbers  are  the  hdisp,  hsync-
            start, hsyncend, and htotal values.  The third section is a list
            of four numbers specifying the vertical timings.  These  numbers
            are  the  vdisp,  vsyncstart,  vsyncend, and vtotal values.  The
            final section is a list of flags specifying  other  characteris-
            tics  of  the mode.  Interlace indicates that the mode is inter-
            laced.  DoubleScan indicates a mode where each scanline is  dou-
            bled. +HSync  and -HSync can be used to select the polarity of
            the HSync signal.  +VSync and -VSync can be used to  select  the
            polarity  of the VSync signal.  Composite can be used to specify
            composite sync on hardware where this is  supported. Addition-
            ally,  on some hardware, +CSync and -CSync may be used to select
            the composite sync polarity.  The HSkew and VScan  options  men-
            tioned  above  in  the  Modes entry description can also be used
            here.
光有个分辨率是不够的

jiangtao9999 · 发表于 2006-8-2 20:19:12

楼上,大部分的分辨率都有吧?

muwanqing · 发表于 2006-8-2 20:57:03

1280*768

lanzinc · 发表于 2006-8-4 00:24:12

下面是
X11R7.1/src/xserver/xorg-server-X11R7.1-1.1.0/hw/xfree86/common/xf86DefModes.c
的内容
内建的modes应该都在这了，各个driver是否还有内建就没研究了。
Xorg真是太庞大了!
希望对KDE有用。

[code:1]
/* $XFree86$ */

/* THIS FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT -- LOOK at
* modeline2c.pl */

/*
* Copyright 1999-2003 by The XFree86 Project, Inc.
*
* Author: Dirk Hohndel <[email protected]>
*/

#ifdef HAVE_XORG_CONFIG_H
#include <xorg-config.h>
#endif

#ifdef __UNIXOS2__
#define I_NEED_OS2_H
#endif
#include "xf86.h"
#include "xf86Config.h"
#include "xf86Priv.h"
#include "xf86_OSlib.h"

#include "globals.h"

#define MODEPREFIX(name) NULL, NULL, name, MODE_OK, M_T_DEFAULT
#define MODESUFFIX 0,0, 0,0,0,0,0,0,0, 0,0,0,0,0,0,FALSE,FALSE,0,NULL,0,0.0,0.0

DisplayModeRec xf86DefaultModes [] = {
/* 640x350 @ 85Hz (VESA) hsync: 37.9kHz */
{MODEPREFIX("640x350"),31500, 640,672,736,832,0, 350,382,385,445,0, V_PHSYNC | V_NVSYNC, MODESUFFIX},
{MODEPREFIX("320x175"),15750, 320,336,368,416,0, 175,191,192,222,0, V_PHSYNC | V_NVSYNC | V_DBLSCAN, MODESUFFIX},
/* 640x400 @ 85Hz (VESA) hsync: 37.9kHz */
{MODEPREFIX("640x400"),31500, 640,672,736,832,0, 400,401,404,445,0, V_NHSYNC | V_PVSYNC, MODESUFFIX},
{MODEPREFIX("320x200"),15750, 320,336,368,416,0, 200,200,202,222,0, V_NHSYNC | V_PVSYNC | V_DBLSCAN, MODESUFFIX},
/* 720x400 @ 85Hz (VESA) hsync: 37.9kHz */
{MODEPREFIX("720x400"),35500, 720,756,828,936,0, 400,401,404,446,0, V_NHSYNC | V_PVSYNC, MODESUFFIX},
{MODEPREFIX("360x200"),17750, 360,378,414,468,0, 200,200,202,223,0, V_NHSYNC | V_PVSYNC | V_DBLSCAN, MODESUFFIX},
/* 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz */
{MODEPREFIX("640x480"),25200, 640,656,752,800,0, 480,490,492,525,0, V_NHSYNC | V_NVSYNC, MODESUFFIX},
{MODEPREFIX("320x240"),12600, 320,328,376,400,0, 240,245,246,262,0, V_NHSYNC | V_NVSYNC | V_DBLSCAN, MODESUFFIX},
/* 640x480 @ 72Hz (VESA) hsync: 37.9kHz */
{MODEPREFIX("640x480"),31500, 640,664,704,832,0, 480,489,491,520,0, V_NHSYNC | V_NVSYNC, MODESUFFIX},
{MODEPREFIX("320x240"),15750, 320,332,352,416,0, 240,244,245,260,0, V_NHSYNC | V_NVSYNC | V_DBLSCAN, MODESUFFIX},
/* 640x480 @ 75Hz (VESA) hsync: 37.5kHz */
{MODEPREFIX("640x480"),31500, 640,656,720,840,0, 480,481,484,500,0, V_NHSYNC | V_NVSYNC, MODESUFFIX},
{MODEPREFIX("320x240"),15750, 320,328,360,420,0, 240,240,242,250,0, V_NHSYNC | V_NVSYNC | V_DBLSCAN, MODESUFFIX},
/* 640x480 @ 85Hz (VESA) hsync: 43.3kHz */
{MODEPREFIX("640x480"),36000, 640,696,752,832,0, 480,481,484,509,0, V_NHSYNC | V_NVSYNC, MODESUFFIX},
{MODEPREFIX("320x240"),18000, 320,348,376,416,0, 240,240,242,254,0, V_NHSYNC | V_NVSYNC | V_DBLSCAN, MODESUFFIX},
/* 800x600 @ 56Hz (VESA) hsync: 35.2kHz */
{MODEPREFIX("800x600"),36000, 800,824,896,1024,0, 600,601,603,625,0, V_PHSYNC | V_PVSYNC, MODESUFFIX},
{MODEPREFIX("400x300"),18000, 400,412,448,512,0, 300,300,301,312,0, V_PHSYNC | V_PVSYNC | V_DBLSCAN, MODESUFFIX},
/* 800x600 @ 60Hz (VESA) hsync: 37.9kHz */
{MODEPREFIX("800x600"),40000, 800,840,968,1056,0, 600,601,605,628,0, V_PHSYNC | V_PVSYNC, MODESUFFIX},
{MODEPREFIX("400x300"),20000, 400,420,484,528,0, 300,300,302,314,0, V_PHSYNC | V_PVSYNC | V_DBLSCAN, MODESUFFIX},
/* 800x600 @ 72Hz (VESA) hsync: 48.1kHz */
{MODEPREFIX("800x600"),50000, 800,856,976,1040,0, 600,637,643,666,0, V_PHSYNC | V_PVSYNC, MODESUFFIX},
{MODEPREFIX("400x300"),25000, 400,428,488,520,0, 300,318,321,333,0, V_PHSYNC | V_PVSYNC | V_DBLSCAN, MODESUFFIX},
/* 800x600 @ 75Hz (VESA) hsync: 46.9kHz */
{MODEPREFIX("800x600"),49500, 800,816,896,1056,0, 600,601,604,625,0, V_PHSYNC | V_PVSYNC, MODESUFFIX},
{MODEPREFIX("400x300"),24750, 400,408,448,528,0, 300,300,302,312,0, V_PHSYNC | V_PVSYNC | V_DBLSCAN, MODESUFFIX},
/* 800x600 @ 85Hz (VESA) hsync: 53.7kHz */
{MODEPREFIX("800x600"),56300, 800,832,896,1048,0, 600,601,604,631,0, V_PHSYNC | V_PVSYNC, MODESUFFIX},
{MODEPREFIX("400x300"),28150, 400,416,448,524,0, 300,300,302,315,0, V_PHSYNC | V_PVSYNC | V_DBLSCAN, MODESUFFIX},
/* 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz */
{MODEPREFIX("1024x768"),44900, 1024,1032,1208,1264,0, 768,768,776,817,0, V_PHSYNC | V_PVSYNC | V_INTERLACE, MODESUFFIX},
{MODEPREFIX("512x384"),22450, 512,516,604,632,0, 384,384,388,408,0, V_PHSYNC | V_PVSYNC | V_INTERLACE | V_DBLSCAN, MODESUFFIX},
/* 1024x768 @ 60Hz (VESA) hsync: 48.4kHz */
{MODEPREFIX("1024x768"),65000, 1024,1048,1184,1344,0, 768,771,777,806,0, V_NHSYNC | V_NVSYNC, MODESUFFIX},
{MODEPREFIX("512x384"),32500, 512,524,592,672,0, 384,385,388,403,0, V_NHSYNC | V_NVSYNC | V_DBLSCAN, MODESUFFIX},
/* 1024x768 @ 70Hz (VESA) hsync: 56.5kHz */
{MODEPREFIX("1024x768"),75000, 1024,1048,1184,1328,0, 768,771,777,806,0, V_NHSYNC | V_NVSYNC, MODESUFFIX},
{MODEPREFIX("512x384"),37500, 512,524,592,664,0, 384,385,388,403,0, V_NHSYNC | V_NVSYNC | V_DBLSCAN, MODESUFFIX},
/* 1024x768 @ 75Hz (VESA) hsync: 60.0kHz */
{MODEPREFIX("1024x768"),78800, 1024,1040,1136,1312,0, 768,769,772,800,0, V_PHSYNC | V_PVSYNC, MODESUFFIX},
{MODEPREFIX("512x384"),39400, 512,520,568,656,0, 384,384,386,400,0, V_PHSYNC | V_PVSYNC | V_DBLSCAN, MODESUFFIX},
/* 1024x768 @ 85Hz (VESA) hsync: 68.7kHz */
{MODEPREFIX("1024x768"),94500, 1024,1072,1168,1376,0, 768,769,772,808,0, V_PHSYNC | V_PVSYNC, MODESUFFIX},
{MODEPREFIX("512x384"),47250, 512,536,584,688,0, 384,384,386,404,0, V_PHSYNC | V_PVSYNC | V_DBLSCAN, MODESUFFIX},
/* 1152x864 @ 75Hz (VESA) hsync: 67.5kHz */
{MODEPREFIX("1152x864"),108000, 1152,1216,1344,1600,0, 864,865,868,900,0, V_PHSYNC | V_PVSYNC, MODESUFFIX},
{MODEPREFIX("576x432"),54000, 576,608,672,800,0, 432,432,434,450,0, V_PHSYNC | V_PVSYNC | V_DBLSCAN, MODESUFFIX},
/* 1280x960 @ 60Hz (VESA) hsync: 60.0kHz */
{MODEPREFIX("1280x960"),108000, 1280,1376,1488,1800,0, 960,961,964,1000,0, V_PHSYNC | V_PVSYNC, MODESUFFIX},
{MODEPREFIX("640x480"),54000, 640,688,744,900,0, 480,480,482,500,0, V_PHSYNC | V_PVSYNC | V_DBLSCAN, MODESUFFIX},
/* 1280x960 @ 85Hz (VESA) hsync: 85.9kHz */
{MODEPREFIX("1280x960"),148500, 1280,1344,1504,1728,0, 960,961,964,1011,0, V_PHSYNC | V_PVSYNC, MODESUFFIX},
{MODEPREFIX("640x480"),74250, 640,672,752,864,0, 480,480,482,505,0, V_PHSYNC | V_PVSYNC | V_DBLSCAN, MODESUFFIX},
/* 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz */
{MODEPREFIX("1280x1024"),108000, 1280,1328,1440,1688,0, 1024,1025,1028,1066,0, V_PHSYNC | V_PVSYNC, MODESUFFIX},
{MODEPREFIX("640x512"),54000, 640,664,720,844,0, 512,512,514,533,0, V_PHSYNC | V_PVSYNC | V_DBLSCAN, MODESUFFIX},
/* 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz */
{MODEPREFIX("1280x1024"),135000, 1280,1296,1440,1688,0, 1024,1025,1028,1066,0, V_PHSYNC | V_PVSYNC, MODESUFFIX},
{MODEPREFIX("640x512"),67500, 640,648,720,844,0, 512,512,514,533,0, V_PHSYNC | V_PVSYNC | V_DBLSCAN, MODESUFFIX},
/* 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz */
{MODEPREFIX("1280x1024"),157500, 1280,1344,1504,1728,0, 1024,1025,1028,1072,0, V_PHSYNC | V_PVSYNC, MODESUFFIX},
{MODEPREFIX("640x512"),78750, 640,672,752,864,0, 512,512,514,536,0, V_PHSYNC | V_PVSYNC | V_DBLSCAN, MODESUFFIX},
/* 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz */
{MODEPREFIX("1600x1200"),162000, 1600,1664,1856,2160,0, 1200,1201,1204,1250,0, V_PHSYNC | V_PVSYNC, MODESUFFIX},
{MODEPREFIX("800x600"),81000, 800,832,928,1080,0, 600,600,602,625,0, V_PHSYNC | V_PVSYNC | V_DBLSCAN, MODESUFFIX},
/* 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz */
{MODEPREFIX("1600x1200"),175500, 1600,1664,1856,2160,0, 1200,1201,1204,1250,0, V_PHSYNC | V_PVSYNC, MODESUFFIX},
{MODEPREFIX("800x600"),87750, 800,832,928,1080,0, 600,600,602,625,0, V_PHSYNC | V_PVSYNC | V_DBLSCAN, MODESUFFIX},
/* 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz */
{MODEPREFIX("1600x1200"),189000, 1600,1664,1856,2160,0, 1200,1201,1204,1250,0, V_PHSYNC | V_PVSYNC, MODESUFFIX},
{MODEPREFIX("800x600"),94500, 800,832,928,1080,0, 600,600,602,625,0, V_PHSYNC | V_PVSYNC | V_DBLSCAN, MODESUFFIX},
/* 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz */
{MODEPREFIX("1600x1200"),202500, 1600,1664,1856,2160,0, 1200,1201,1204,1250,0, V_PHSYNC | V_PVSYNC, MODESUFFIX},
{MODEPREFIX("800x600"),101250, 800,832,928,1080,0, 600,600,602,625,0, V_PHSYNC | V_PVSYNC | V_DBLSCAN, MODESUFFIX},
/* 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz */
{MODEPREFIX("1600x1200"),229500, 1600,1664,1856,2160,0, 1200,1201,1204,1250,0, V_PHSYNC | V_PVSYNC, MODESUFFIX},
{MODEPREFIX("800x600"),114750, 800,832,928,1080,0, 600,600,602,625,0, V_PHSYNC | V_PVSYNC | V_DBLSCAN, MODESUFFIX},
/* 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz */
{MODEPREFIX("1792x1344"),204800, 1792,1920,2120,2448,0, 1344,1345,1348,1394,0, V_NHSYNC | V_PVSYNC, MODESUFFIX},
{MODEPREFIX("896x672"),102400, 896,960,1060,1224,0, 672,672,674,697,0, V_NHSYNC | V_PVSYNC | V_DBLSCAN, MODESUFFIX},
/* 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz */
{MODEPREFIX("1792x1344"),261000, 1792,1888,2104,2456,0, 1344,1345,1348,1417,0, V_NHSYNC | V_PVSYNC, MODESUFFIX},
{MODEPREFIX("896x672"),130500, 896,944,1052,1228,0, 672,672,674,708,0, V_NHSYNC | V_PVSYNC | V_DBLSCAN, MODESUFFIX},
/* 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz */
{MODEPREFIX("1856x1392"),218300, 1856,1952,2176,2528,0, 1392,1393,1396,1439,0, V_NHSYNC | V_PVSYNC, MODESUFFIX},
{MODEPREFIX("928x696"),109150, 928,976,1088,1264,0, 696,696,698,719,0, V_NHSYNC | V_PVSYNC | V_DBLSCAN, MODESUFFIX},
/* 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz */
{MODEPREFIX("1856x1392"),288000, 1856,1984,2208,2560,0, 1392,1393,1396,1500,0, V_NHSYNC | V_PVSYNC, MODESUFFIX},
{MODEPREFIX("928x696"),144000, 928,992,1104,1280,0, 696,696,698,750,0, V_NHSYNC | V_PVSYNC | V_DBLSCAN, MODESUFFIX},
/* 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz */
{MODEPREFIX("1920x1440"),234000, 1920,2048,2256,2600,0, 1440,1441,1444,1500,0, V_NHSYNC | V_PVSYNC, MODESUFFIX},
{MODEPREFIX("960x720"),117000, 960,1024,1128,1300,0, 720,720,722,750,0, V_NHSYNC | V_PVSYNC | V_DBLSCAN, MODESUFFIX},
/* 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz */
{MODEPREFIX("1920x1440"),297000, 1920,2064,2288,2640,0, 1440,1441,1444,1500,0, V_NHSYNC | V_PVSYNC, MODESUFFIX},
{MODEPREFIX("960x720"),148500, 960,1032,1144,1320,0, 720,720,722,750,0, V_NHSYNC | V_PVSYNC | V_DBLSCAN, MODESUFFIX},
/* 832x624 @ 75Hz (74.55Hz) (fix if the official/Apple spec is different) hsync: 49.725kHz */
{MODEPREFIX("832x624"),57284, 832,864,928,1152,0, 624,625,628,667,0, V_NHSYNC | V_NVSYNC, MODESUFFIX},
{MODEPREFIX("416x312"),28642, 416,432,464,576,0, 312,312,314,333,0, V_NHSYNC | V_NVSYNC | V_DBLSCAN, MODESUFFIX},
/* 1152x768 @ 54.8Hz (Titanium PowerBook) hsync: 44.2kHz */
{MODEPREFIX("1152x768"),64995, 1152,1178,1314,1472,0, 768,771,777,806,0, V_PHSYNC | V_PVSYNC, MODESUFFIX},
{MODEPREFIX("576x384"),32497, 576,589,657,736,0, 384,385,388,403,0, V_PHSYNC | V_PVSYNC | V_DBLSCAN, MODESUFFIX},
/* 1400x1050 @ 60Hz (VESA GTF) hsync: 65.5kHz */
{MODEPREFIX("1400x1050"),122000, 1400,1488,1640,1880,0, 1050,1052,1064,1082,0, V_PHSYNC | V_PVSYNC, MODESUFFIX},
{MODEPREFIX("700x525"),61000, 700,744,820,940,0, 525,526,532,541,0, V_PHSYNC | V_PVSYNC | V_DBLSCAN, MODESUFFIX},
/* 1400x1050 @ 75Hz (VESA GTF) hsync: 82.2kHz */
{MODEPREFIX("1400x1050"),155800, 1400,1464,1784,1912,0, 1050,1052,1064,1090,0, V_PHSYNC | V_PVSYNC, MODESUFFIX},
{MODEPREFIX("700x525"),77900, 700,732,892,956,0, 525,526,532,545,0, V_PHSYNC | V_PVSYNC | V_DBLSCAN, MODESUFFIX},
/* 1600x1024 @ 60Hz (SGI 1600SW) hsync: 64.0kHz */
{MODEPREFIX("1600x1024"),106910, 1600,1620,1640,1670,0, 1024,1027,1030,1067,0, V_NHSYNC | V_NVSYNC, MODESUFFIX},
{MODEPREFIX("800x512"),53455, 800,810,820,835,0, 512,513,515,533,0, V_NHSYNC | V_NVSYNC | V_DBLSCAN, MODESUFFIX},
/* 1920x1440 @ 85Hz (VESA GTF) hsync: 128.5kHz */
{MODEPREFIX("1920x1440"),341350, 1920,2072,2288,2656,0, 1440,1441,1444,1512,0, V_NHSYNC | V_PVSYNC, MODESUFFIX},
{MODEPREFIX("960x720"),170675, 960,1036,1144,1328,0, 720,720,722,756,0, V_NHSYNC | V_PVSYNC | V_DBLSCAN, MODESUFFIX},
/* 2048x1536 @ 60Hz (VESA GTF) hsync: 95.3kHz */
{MODEPREFIX("2048x1536"),266950, 2048,2200,2424,2800,0, 1536,1537,1540,1589,0, V_NHSYNC | V_PVSYNC, MODESUFFIX},
{MODEPREFIX("1024x768"),133475, 1024,1100,1212,1400,0, 768,768,770,794,0, V_NHSYNC | V_PVSYNC | V_DBLSCAN, MODESUFFIX},
/* 2048x1536 @ 75Hz (VESA GTF) hsync: 120.2kHz */
{MODEPREFIX("2048x1536"),340480, 2048,2216,2440,2832,0, 1536,1537,1540,1603,0, V_NHSYNC | V_PVSYNC, MODESUFFIX},
{MODEPREFIX("1024x768"),170240, 1024,1108,1220,1416,0, 768,768,770,801,0, V_NHSYNC | V_PVSYNC | V_DBLSCAN, MODESUFFIX},
/* 2048x1536 @ 85Hz (VESA GTF) hsync: 137.0kHz */
{MODEPREFIX("2048x1536"),388040, 2048,2216,2440,2832,0, 1536,1537,1540,1612,0, V_NHSYNC | V_PVSYNC, MODESUFFIX},
{MODEPREFIX("1024x768"),194020, 1024,1108,1220,1416,0, 768,768,770,806,0, V_NHSYNC | V_PVSYNC | V_DBLSCAN, MODESUFFIX},
{MODEPREFIX(NULL),0,0,0,0,0,0,0,0,0,0,0,0,MODESUFFIX}
};

[/code:1]

/* THIS FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT -- LOOK at
* modeline2c.pl */

这一行没看明白

lanzinc · 发表于 2006-8-4 01:42:35

找到modeline2c.pl了:
前面几行说明：
# automatically generate the xf86DefModeSet.c file from a normal
# XF86Config style file of Modelines
#
# run as
#
# perl /modeline2c.pl < [modesfile] > xf86DefModes.c

也就是说如果有足够的宽屏显示器的数据的话
建一个"normal XF86Config style file of Modelines"的文件，再用modeline2c.pl转换成xf86DefModes.c，替换原来的文件，编译出来的Xorg就能较好的支持宽平了。
不过要考虑数组:
xf86DefaultModes []的大小对软件运行的影响。

当然如果有足够的宽屏显示器的数据的话
也可以不动xf86DefModes.c，而是修改xorg.conf的配置程序(不一定由Xorg提供)，在生成和修改xorg.conf的时候把合适的显示模式用ModeLine添加到文件中。宽屏显示器一样能很好的工作。

AZu · 发表于 2006-8-4 12:28:47

1280x800

KDE · 发表于 2006-8-4 13:56:26

我的显示器是普通 CRT 的，不是 LED 的，所以需要大家提供做够多的数据。

muwanqing · 发表于 2006-8-5 23:02:32

就需要那些数据

lanzinc · 发表于 2006-8-6 21:40:36

如果你的宽屏已经在Linux下正常工作的话
可以这样：
[root@206studio ~]# xvidtune -show
"1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync

这样就可以定义一个完整的ModeLine了。

yanxu_cauc · 发表于 2006-8-10 09:14:55

我是13.3的宽屏小本，刚装ML的时候找不到1280×800分辨率，但后来发现把显卡驱程改成Generic也就是通用LCD驱动就有那个选项了

		自动登录	找回密码
密码			注册