QQ登录

只需一步,快速开始

 找回密码
 注册

QQ登录

只需一步,快速开始

查看: 2051|回复: 0

History(历史)命令用法 15 例 ZT

[复制链接]
发表于 2009-7-23 15:40:56 | 显示全部楼层 |阅读模式
History(历史)命令用法 15 例    2008-09-07 Toy Posted in Cli,  Featured,  TipsRSSTrackback
               
        如果你经常使用 Linux 命令行,那么使用 history(历史)命令可以有效地提升你的效率。本文将通过实例的方式向你介绍 history 命令的 15 个用法。

  • 使用 HISTTIMEFORMAT 显示时间戳当你从命令行执行 history 命令后,通常只会显示已执行命令的序号和命令本身。如果你想要查看命令历史的时间戳,那么可以执行:# export HISTTIMEFORMAT='%F %T '# history | more1  2008-08-05 19:02:39 service network restart2  2008-08-05 19:02:39 exit3  2008-08-05 19:02:39 id4  2008-08-05 19:02:39 cat /etc/redhat-release注意:这个功能只能用在当 HISTTIMEFORMAT 这个环境变量被设置之后,之后的那些新执行的 bash 命令才会被打上正确的时间戳。在此之前的所有命令,都将会显示成设置 HISTTIMEFORMAT 变量的时间。[感谢 NightOwl 读者补充]
  • 使用 Ctrl+R 搜索历史Ctrl+R 是我经常使用的一个快捷键。此快捷键让你对命令历史进行搜索,对于想要重复执行某个命令的时候非常有用。当找到命令后,通常再按回车键就可以执行该命令。如果想对找到的命令进行调整后再执行,则可以按一下左或右方向键。# [Press Ctrl+R from the command prompt, which will display the reverse-i-search prompt](reverse-i-search)`red‘: cat /etc/redhat-release[Note: Press enter when you see your command, which will execute the command from the history]# cat /etc/redhat-releaseFedora release 9 (Sulphur)
  • 快速重复执行上一条命令有 4 种方法可以重复执行上一条命令:
    • 使用上方向键,并回车执行。
    • 按 !! 并回车执行。
    • 输入 !-1 并回车执行。
    • 按 Ctrl+P 并回车执行。
  • 从命令历史中执行一个指定的命令在下面的例子中,如果你想重复执行第 4 条命令,那么可以执行 !4:# history | more1  service network restart2  exit3  id4  cat /etc/redhat-release# !4cat /etc/redhat-releaseFedora release 9 (Sulphur)
  • 通过指定关键字来执行以前的命令在下面的例子,输入 !ps 并回车,将执行以 ps 打头的命令:# !psps aux | grep yproot     16947  0.0  0.1  36516  1264 ?        Sl   13:10   0:00 ypbindroot     17503  0.0  0.0   4124   740 pts/0    S+   19:19   0:00 grep yp
  • 使用 HISTSIZE 控制历史命令记录的总行数将下面两行内容追加到 .bash_profile 文件并重新登录 bash shell,命令历史的记录数将变成 450 条:# vi ~/.bash_profileHISTSIZE=450HISTFILESIZE=450
  • 使用 HISTFILE 更改历史文件名称默认情况下,命令历史存储在 ~/.bash_history 文件中。添加下列内容到 .bash_profile 文件并重新登录 bash shell,将使用 .commandline_warrior 来存储命令历史:# vi ~/.bash_profileHISTFILE=/root/.commandline_warrior
  • 使用 HISTCONTROL 从命令历史中剔除连续重复的条目在下面的例子中,pwd 命令被连续执行了三次。执行 history 后你会看到三条重复的条目。要剔除这些重复的条目,你可以将 HISTCONTROL 设置为 ignoredups:# pwd# pwd# pwd# history | tail -444  pwd45  pwd46  pwd [Note that there are three pwd commands in history, after executing pwd 3 times as shown above]47  history | tail -4# export HISTCONTROL=ignoredups# pwd# pwd# pwd# history | tail -356  export HISTCONTROL=ignoredups57  pwd [Note that there is only one pwd command in the history, even after executing pwd 3 times as shown above]58  history | tail -4
  • 使用 HISTCONTROL 清除整个命令历史中的重复条目上例中的 ignoredups 只能剔除连续的重复条目。要清除整个命令历史中的重复条目,可以将 HISTCONTROL 设置成 erasedups:# export HISTCONTROL=erasedups# pwd# service httpd stop# history | tail -338  pwd39  service httpd stop40  history | tail -3# ls -ltr# service httpd stop# history | tail -635  export HISTCONTROL=erasedups36  pwd37  history | tail -338  ls -ltr39  service httpd stop[Note that the previous service httpd stop after pwd got erased]40  history | tail -6
  • 使用 HISTCONTROL 强制 history 不记住特定的命令将 HISTCONTROL 设置为 ignorespace,并在不想被记住的命令前面输入一个空格:
    # export HISTCONTROL=ignorespace
    # ls -ltr
    # pwd
    #  service httpd stop [Note that there is a space at the beginning of service, to ignore this command from history]
    # history | tail -3
    67  ls -ltr
    68  pwd
    69  history | tail -3
  • 使用 -c 选项清除所有的命令历史如果你想清除所有的命令历史,可以执行:# history -c
  • 命令替换在下面的例子里,!!:$ 将为当前的命令获得上一条命令的参数:# ls anaconda-ks.cfganaconda-ks.cfg# vi !!:$vi anaconda-ks.cfg补充:使用 !$ 可以达到同样的效果,而且更简单。[感谢 wanzigunzi 读者补充]下例中,!^ 从上一条命令获得第一项参数:# cp anaconda-ks.cfg anaconda-ks.cfg.bakanaconda-ks.cfg# vi -5 !^vi anaconda-ks.cfg
  • 为特定的命令替换指定的参数在下面的例子,!cp:2 从命令历史中搜索以 cp 开头的命令,并获取它的第二项参数:# cp ~/longname.txt /really/a/very/long/path/long-filename.txt# ls -l !cp:2ls -l /really/a/very/long/path/long-filename.txt下例里,!cp:$ 获取 cp 命令的最后一项参数:# ls -l !cp:$ls -l /really/a/very/long/path/long-filename.txt
  • 使用 HISTSIZE 禁用 history如果你想禁用 history,可以将 HISTSIZE 设置为 0:# export HISTSIZE=0# history# [Note that history did not display anything]
  • 使用 HISTIGNORE 忽略历史中的特定命令下面的例子,将忽略 pwd、ls、ls -ltr 等命令:# export HISTIGNORE=”pwd:ls:ls -ltr:”# pwd# ls# ls -ltr# service httpd stop# history | tail -379  export HISTIGNORE=”pwd:ls:ls -ltr:”80  service httpd stop81  history[Note that history did not record pwd, ls and ls -ltr]
[via The Geek Stuff]
您需要登录后才可以回帖 登录 | 注册

本版积分规则

GMT+8, 2024-3-29 13:06 , Processed in 0.050368 second(s), 15 queries .

© 2021 Powered by Discuz! X3.5.

快速回复 返回顶部 返回列表