做了USB猫的RPM，有要的就下

lovewilliam

RT

地址http://www.linuxfans.org/nuke/modules.php?name=Site_Downloads&op=geninfo&did=2569

要重新编译Kernel，必须是2.6.6的kernel，还要打补丁

补丁下载http://www.linuxfans.org/nuke/modules.php?name=Site_Downloads&op=geninfo&did=2485

建议以后MagicLinux做内核的时候把这几个选项勾上

[code:1]Code maturity level options

[*] Prompt for development and/or incomplete code/drivers

Loadable module support

[*] Enable loadable module support

[*] Set version information on all module symbols

[*] Kernel module loader

Networking options

<*> Packet socket

<*> Unix domain sockets

[*] TCP/IP networking

[*] Asynchronous Transfer Mode (ATM)

USB support

<*> Support for USB

[*] Preliminary USB device filesystem

<M> UHCI

<M> OHCI

<M> Alcatel Speedtouch USB support (USB_SPEEDTOUCH)
     
Networking options

[*] Asynchronous Transfer Mode (ATM)

[*] Classical IP over ATM


Networking options

[M] RFC1483/2684 Bridged protocols

Network Device Support

<M > PPP (point-to-point protocol) support

<M> PPP Deflate compression

<M> PPP over Ethernet (EXPERIMENTAL)


Network Device Support

<M > PPP (point-to-point protocol) support

<M> PPP Deflate compression

<M> PPP over ATM

   Processor type and features

[ ] Symmetric multi-processing support

Cryptographic API (CRYPTO)

<M>CRC32c CRC algorithm (CRYPTO_CRC32C)

Library routines

<M>CRC32c (Castagnoli, et al) Cyclic Redundancy-Check (LIBCRC32C)

[/code:1]

还要把UB的补丁打上

lovewilliam

Kernel 已经编译成RPM了

下载http://www.linuxsky.net/down/ftproot/incoming/lovewilliam/Kernel/kernel-2.6.6-4.i386.rpm