Board logo

标题: skyeye1.3.1 测试s3c44b0的Uboot错误 [打印本页]

作者: chq8486    时间: 2013-5-14 15:42     标题: skyeye1.3.1 测试s3c44b0的Uboot错误

fedora18xfce 下安装skyeye1.3.1运行1.3.1testsuite的uboot提示In SIM_start, Should provide valid mach option in your config file.如何解决呢?请高手指点!!!
配置文件也是测试套件里的如下:
# skyeye config file for S3C44B0X
arch:arm
cpu: arm7tdmi

mach: s3c44b0x

# physical memory
mem_bank: map=M, type=R,  addr=0x00000000, size=0x00001000
mem_bank: map=M, type=R,  addr=0x00001000, size=0x001ff000
mem_bank: map=M, type=RW, addr=0x0c000000, size=0x00800000

# peripherals I/O mapping area
mem_bank: map=I, type=RW, addr=0x01c00000, size=0x00400000

# uart 0
uart: mod=stdio

# uart 1
uart: mod=pipe, desc=/dev/ttyS1

# LCD
lcd: type=s3c44b0x, mod=gtk

#net: ethmod=tuntap, hostip=10.0.0.1
#dbct: state=on




欢迎光临 中国Linux公社论坛 (http://forum.linuxfans.org/) Powered by Discuz! 6.1.0F