QQ登录

只需一步,快速开始

 找回密码
 注册

QQ登录

只需一步,快速开始

查看: 1429|回复: 0

skyeye不同版本的使用问题

[复制链接]
发表于 2009-4-30 15:53:12 | 显示全部楼层 |阅读模式
按照http://www.linuxfans.org/bbs/vie ... 8533&highlight=
我安装了skyeye1.2.8下载了相应版本的测试包...
$ cd skyeye-testsuite-1.2.8/uClinux/at91/uclinux_rtl8019
$ ls
linux  romfs.img  skyeye.conf  skyeye_dbct.conf
$ skyeye -e linux
出错:
......
..............
RWRO<3>Blkmem: Unable to get major %d
blkmem%u<3>Blkmem: unregister of device failed
/opt/users/skyeyeuser/src/uclinux/at91/uClinux-dist/linux-2.4.x/include/linux/blkdev.hnr_sectors is %d
ramdisk<6>RAMDISK: bad command: %d
RAMDISK driver initialized: %d RAM disks of %dK size %d blocksize
/opt/users/skyeyeuser/src/uclinux/at91/uClinux-dist/linux-2.4.x/include/linux/netdevice.h/opt/users/skyeyeuser/src/uclinux/at91/uClinux-dist/linux-2.4.x/include/linux/netdevice.h/opt/users/skyeyeuser/src/uclinux/at91/uClinux-dist/linux-2.4.x/include/linux/netdevice.hNONEINCOMPLETEREACHABLESTALE<6>NET4: Linux TCP/IP 1.0 for NET4.0
<2>inet_proto_init: panic
<6>IP Protocols: %s%s<6>IP Protocols: /IP 1.0 for NET4.0
<2>inet_proto_init: panic
<6>IP Protocols: %s%s%s%s%s%s%s%s<3>Ignoring attempt to register illegal socket type %d.
<3>Ignoring attempt to register illegal socket type %d.
<3>Ignoring attempt to register illegal socket type %d.
<6>IP: routing cache hash table of %u buckets, %ldKbytes
Bus read error, can not find corresponding bank for addr 0x4139ae18,pc=0x10be4a0

起初我以为是我的skyeye可执行文件的问题,我用它进入别的test目录,确可以使用

但是当我使用apt-get install skyeye安装的1.2.3版本时,居然出现了迷人的uClinux

Welcome to
          ____ _  _
         /  __| ||_|                 
    _   _| |  | | _ ____  _   _  _  _
   | | | | |  | || |  _ \| | | |\ \/ /
   | |_| | |__| || | | | | |_| |/    \
   |  ___\____|_||_|_| |_|\____|\_/\_/
   | |
   |_|

GDB/ARMulator support by <[email protected]>
For further information check:
http://www.uclinux.org/

Command: /bin/ifconfig eth0 up 10.0.0.2
SIOCGIFFLAGS: No such device
SIOCSIFADDR: No such device
pid 11: failed 512
Execution Finished, Exiting
init: Booting to single user mode

Sash command shell (version 1.1.1)
/>

这是为什么呢?难道新版本的test不支持新版本的,确支持老版本..........

[ 本帖最后由 boy0673 于 2009-4-30 15:54 编辑 ]
您需要登录后才可以回帖 登录 | 注册

本版积分规则

GMT+8, 2024-4-27 16:27 , Processed in 0.062269 second(s), 15 queries .

© 2021 Powered by Discuz! X3.5.

快速回复 返回顶部 返回列表