about mplayer installing

tsyjcyh

mplayer安装记
1.下载mplayer-0.90rc5
2.解压,按说明文档找到所有支持包,除nvidia驱动
3.下载NVIDIA-Linux-X86-1.0-4349.run并安装,步骤如下:
  a.拷贝至用户目录
  b.修改/etc/init文档进入init 3 mode
  c.重起,在字符界面下安装,显示如下:
    #sh NVIDIA-Linux-X86-1.0-4349.run
    Verfying archive interify ... Error in check sums
    985982146 3910740960
    #
  d.未能成功,使用vi修改init回到init 5 mode
4.重起,在X界面下继续安装win32 for Linux
  cp w32codec-0.60/*.* /usr/lib/win32
5.安装divx5 for Linux
  cd div4linux-20020418
  # ./install.sh
6.解压编译安装mplayer：
  tar vxf MPlayer-0.90pre5.tar，cd MPlayer-0.90pre5.tar，
  ./configure
  安装过程中有许多warning
  完成后
  make
  makeinstall
  没问题
  cd ./mplayer
  cp etc/codecs.conf ~/.mplayer
  cp etc/example.conf ~/.mplayer/config
7.运行,不成功,不能打开.dat, 见图:
8.重新使用图形化界面安装,结果亦不成功.
9.想办法,查勘文档readme,有:
  Before you start...
  ...
  driver.
- nVidia cards: Get the X11 driver from www.nvidia.com for Xv support.
- NeoMagic cards: Get an Xv capable driver from our homepage as described
10.go http://www.nvidia.com,驱动程序如已下载的,查看相关文档,有
  Q: nvidia-installer doesn't work on my computer.  How can I install the
   driver contained within the .run file?

  A: To install the NVIDIA driver contained within the .run file without
   using nvidia-installer, you can use the included Makefile:

       sh ./NVIDIA-Linux-x86-1.0-4349.run --extract-only
       cd NVIDIA-Linux-x86-1.0-4349
       make install
  试一下,错误依旧,我暂时想不出办法了.英文文档不容易读懂.请大虾指点.
附:
   Red hat 8.0 personal edition
   nVidia TNT2 m64

图:

llc

#sh NVIDIA-Linux-X86-1.0-4349.run
Verfying archive interify ... Error in check sums
985982146 3910740960

下载的文件有错误,重新下载NVIDIA-Linux-X86-1.0-4349.run