运行gmplay出错,麻烦大家帮小弟看看

henryzhou

现在mplayer命令行模式播放没有问题,运行gmplay就报错,但我font和skin的安装应该没有问题,没有gui界面不方便.

麻烦各位专家看看,谢谢各位.
[root@KevinLinux etc]# cp input.conf ~/.mplayer
[root@KevinLinux etc]# gmplayer
Using GNU internationalization
Original domain: messages
Original dirname: /usr/share/locale
Current domain: mplayer
Current dirname: /usr/local/share/locale


MPlayer 0.90rc1-3.2 (C) 2000-2002 Arpad Gereoffy (see DOCS)

CPU: Intel Celeron 2/Pentium III Tualatin (Family: 6, Stepping: 1)
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
Compiled for x86 CPU with extensions: MMX MMX2 SSE

Reading config file /usr/local/etc/mplayer/mplayer.conf: No such file or directory
Reading config file /root/.mplayer/config
Reading config file /home/gabucino/.mplayer/i_did_not_RTFM_carefully_enough...: No such file or directory
[cfg] read config file: /root/.mplayer/gui.conf
Reading config file /root/.mplayer/gui.conf: No such file or directory
vo: X11 running at 1024x768 with depth 16 and 16 bpp (":0.0" => local display)
Reading /root/.mplayer/codecs.conf: 49 audio & 123 video codecs
Font /root/.mplayer/font/font.desc loaded successfully! (206 chars)
Failed to open /dev/rtc: No such device (mplayer should be setuid root or /dev/rtc should be readable by the user.)
Using usleep() timing
Input config file /root/.mplayer/input.conf parsed : 50 binds
SKIN dir 1: '/root/.mplayer/Skin'
SKIN dir 2: '/usr/local/share/mplayer/Skin'
libpng warning: Application was compiled with png.h from libpng-1.0.3
libpng warning: Application is running with png.c from libpng-1.2.2
libpng error: Incompatible libpng version in application and library


MPlayer interrupted by signal 11 in module: unknown
- MPlayer crashed by bad usage of CPU/FPU/RAM. Recompile MPlayer with --enable-debug and make a 'gdb' backtrace and disassembly. For details, see DOCS/bugreports.html section 5.b.
- MPlayer crashed. This shouldn't happen. It can be a bug in the MPlayer code _or_ in your drivers _or_ in your gcc version. If you think it's MPlayer's fault, please read DOCS/bugreports.html and follow instructions there. We can't and won't help unless you provide these informations when reporting a possible bug.

henryzhou

我是编译.tar.bz2文件安装的,不是rpm

试过了pre10和rc1版本都是报这个错误.

llc

我估计比较可能的原因是:你的libpng的版本和libpng-devel版本不相同所致,你检查一下看看
rpm -qi libpng
rpm -qi libpng-devel

henryzhou

我装了两个版本的libpng,怎么卸载其中一个?rpm -e不让

llc

rpm -e libpng-版本号,譬如rpm -e libpng-1.0.3,然后再安装
造成这种原因一般是由于安装第二个libpng时没有用Uvh参数而是ivh参数强行安装,建议大家重复安装某个软件时尽量用Uvh参数

henryzhou

谢谢llc的帮助

但还是见鬼了,我肯定现在libpng和libpng-devel都只有一个,而且版本相同.但还是报那个错.还有什么解决办法吗?我机器上肯定没有libpng-1.0.3

llc

不如这样试试,rpm -e libpng-devel && rpm -e libpng,确认删除后,重新安装libpng和libpng-devel(确认版本相同,我以前试过编译出错,搞了好久才发现SDL和SDL-devel版本不同的缘故),然后重新./configure --enable-gui,重新make和make install

henryzhou

谢谢llc的帮助,我又一次卸载了libpng和libpng-devel后重装,再编译终于成功了.

太感谢大家了

gugong

--allmatches
              Remove all versions of the package which  match  PACKAGE_NAME.  Normally  an
              error is issued if PACKAGE_NAME matches multiple packages.

删除多个同名、但是版本不同的包 时，使用 rpm -e --allmatches 参数。