求救!我的刷新还有偏移问题!
这时我的配置文件.请老大门帮我看看.谢谢我想让他在1024*768的分辨率85的刷新率的情况下工作.谢谢了
# File generated by anaconda.
Section "ServerLayout"
Identifier "Anaconda Configured"
Screen 0"Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Mouse1" "SendCoreEvents"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# The location of the RGB database.Note, this is the name of the
# file minus the extension (like ".txt" or ".db").There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:7100"
EndSection
Section "Module"
Load"dbe"
Load"extmod"
Load"fbdevhw"
Load"dri"
Load"glx"
Load"record"
Load"freetype"
Load"type1"
EndSection
Section "InputDevice"
Identifier"Keyboard0"
Driver "keyboard"
# Option "AutoRepeat" "500 5"
# when using XQUEUE, comment out the above line, and uncomment the
# following line
# Option "Protocol" "Xqueue"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
#Option "XkbVariant" ""
#Option "XkbOptions" ""
EndSection
Section "InputDevice"
Identifier"Mouse0"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "Protocol" "IMPS/2"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 31.5-48.5
VertRefresh 50-70
Option "dpms"
EndSection
Section "Device"
# no known options
Identifier "NVIDIA GeForce 2 MX (generic)"
Driver "nv"
VendorName "NVIDIA GeForce 2 MX (generic)"
BoardName "NVIDIA GeForce 2 MX (generic)"
#BusID
EndSection
Section "Screen"
Identifier "Screen0"
Device "NVIDIA GeForce 2 MX (generic)"
Monitor "Monitor0"
DefaultDepth 24
Subsection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubsection
EndSection
Section "DRI"
Mode 0666
EndSection 见精华区 老大我看了你的贴子了.
我用的是 Red Hat Linux 8.0简体中文版.
我show了以后没有加的地方阿.
老大能帮我修改一下这个文件吗?我是一个新手..谢谢啦 # xvidtune
Vendor: Monitor Vendor, Model: Monitor Model
Num hsync: 1, Num vsync: 1
hsync range 0:31.50 -48.50
vsync range 0:50.00 -70.00
"1024x768" 65.00 1024 1068 1204 1352 768771777806 -hsync -vsync
这时我的 .
怎么改阿老大?还有刷新率.谢谢老大了... :shock: 老大帮帮我啊！怎么写啊？ Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 31.5-48.5
VertRefresh 50-100<----定义刷新率的可用范围，够胆量的就调高一点，不行弄回来
Modeline "1024x768" 65.00 1024 1068 1204 1352 768 771 777 806 -hsync -vsync <----这里就是你show的结果，前头加上modeline字样
Option "dpms"
修改前记得先备份一个，切记切记！ 刷新率的调整也见精华版那帖子，都可以在xvidtune里调整，调整好后将结果show出，按上贴那样写好就行 还是老大您解决问题！我这就去rea hat下面去该。谢谢
页:
[1]