求救!我的刷新还有偏移问题!

flew

这时我的配置文件.请老大门帮我看看.谢谢

我想让他在1024*768的分辨率85的刷新率的情况下工作.谢谢了



# File generated by anaconda.

Section "ServerLayout"
        Identifier     "Anaconda Configured"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice        "Mouse1" "SendCoreEvents"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath        "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.

    FontPath   "unix/:7100"

EndSection

Section "Module"
        Load  "dbe"
        Load  "extmod"
        Load  "fbdevhw"
        Load  "dri"
        Load  "glx"
        Load  "record"
        Load  "freetype"
        Load  "type1"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "keyboard"

#        Option        "AutoRepeat"        "500 5"

# when using XQUEUE, comment out the above line, and uncomment the
# following line
#        Option        "Protocol"        "Xqueue"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#        Option        "Xleds"                "1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.
#        Option        "XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#        Option        "XkbModel"        "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#        Option        "XkbModel"        "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#        Option        "XkbLayout"        "de"
# or:
#        Option        "XkbLayout"        "de"
#        Option        "XkbVariant"        "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#        Option        "XkbOptions"        "ctrl:swapcaps"
        Option        "XkbRules"        "xfree86"
        Option        "XkbModel"        "pc105"
        Option        "XkbLayout"        "us"
        #Option        "XkbVariant"        ""
        #Option        "XkbOptions"        ""
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "PS/2"
        Option      "Device" "/dev/psaux"
        Option      "ZAxisMapping" "4 5"
        Option      "Emulate3Buttons" "no"
EndSection


Section "InputDevice"
        Identifier        "Mouse1"
        Driver                "mouse"
        Option                "Device"                "/dev/input/mice"
        Option                "Protocol"                "IMPS/2"
        Option                "Emulate3Buttons"        "no"
        Option                "ZAxisMapping"                "4 5"
EndSection


Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
        HorizSync   31.5-48.5
        VertRefresh 50-70
        Option "dpms"

       
EndSection

Section "Device"
        # no known options
        Identifier   "NVIDIA GeForce 2 MX (generic)"
        Driver       "nv"
        VendorName   "NVIDIA GeForce 2 MX (generic)"
        BoardName     "NVIDIA GeForce 2 MX (generic)"
        
        #BusID
EndSection

Section "Screen"
        Identifier   "Screen0"
        Device       "NVIDIA GeForce 2 MX (generic)"
        Monitor      "Monitor0"
        DefaultDepth        24

        Subsection "Display"
                Depth       24
                Modes       "1024x768" "800x600" "640x480"
        EndSubsection

EndSection

Section "DRI"
        Mode 0666
EndSection

llc

见精华区

flew

老大我看了你的贴子了.

我用的是 Red Hat Linux 8.0简体中文版.

我show了以后没有加的地方阿.

老大能帮我修改一下这个文件吗?我是一个新手..谢谢啦

flew

[root@gh root]# xvidtune
Vendor: Monitor Vendor, Model: Monitor Model
Num hsync: 1, Num vsync: 1
hsync range 0:  31.50 -  48.50
vsync range 0:  50.00 -  70.00
"1024x768"     65.00   1024 1068 1204 1352    768  771  777  806 -hsync -vsync

这时我的 .

怎么改阿老大?还有刷新率.谢谢老大了...

flew

老大帮帮我啊！怎么写啊？

llc

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 31.5-48.5
VertRefresh 50-100  <----定义刷新率的可用范围，够胆量的就调高一点，不行弄回来
Modeline "1024x768" 65.00 1024 1068 1204 1352 768 771 777 806 -hsync -vsync   <----这里就是你show的结果，前头加上modeline字样
Option "dpms"


修改前记得先备份一个，切记切记！

llc

刷新率的调整也见精华版那帖子，都可以在xvidtune里调整，调整好后将结果show出，按上贴那样写好就行

flew

还是老大您解决问题！我这就去rea hat下面去该。谢谢