安装Skyeye,make 失败!请教解决方法?
我在安装skyeye时, make过程中出错,出现make: Entering directory `/opt/skyeye-cdrom/SkyEye/skyeye/skyeye/mmalloc'
make: Nothing to be done for `all'.
make: Leaving directory `/opt/skyeye-cdrom/SkyEye/skyeye/skyeye/mmalloc'
make: Entering directory `/opt/skyeye-cdrom/SkyEye/skyeye/skyeye/readline'
make: Nothing to be done for `all'.
make: Leaving directory `/opt/skyeye-cdrom/SkyEye/skyeye/skyeye/readline'
make: Entering directory `/opt/skyeye-cdrom/SkyEye/skyeye/skyeye/sim'
make: Entering directory `/opt/skyeye-cdrom/SkyEye/skyeye/skyeye/sim/common'
make: Nothing to be done for `default'.
make: Leaving directory `/opt/skyeye-cdrom/SkyEye/skyeye/skyeye/sim/common'
make: Entering directory `/opt/skyeye-cdrom/SkyEye/skyeye/skyeye/sim/arm'
make: *** 没有指明目标并且找不到 makefile。 停止。
make: Leaving directory `/opt/skyeye-cdrom/SkyEye/skyeye/skyeye/sim/arm'
make: *** 错误 2
make: Leaving directory `/opt/skyeye-cdrom/SkyEye/skyeye/skyeye/sim'
make: *** 错误 2
Before run "make" command, you need to run "make distclean" firstly. 我安装的skyeye的版本是0。8。0的;按照README 的说明和你的指导:
按如下编译,但又通不过.
./configure --target=arm-elf --prefix=/usr/local
。。。。
make distclean
(下面是具体的信息)
make
(下面是具体的信息)
# make distclean
。。。。。。
make: Entering directory `/root/Desktop/SkyEye-CDROM/SkyEye/skyeye/skyeye/sim/arm'
make: *** 没有规则可以创建目标 distclean 停止
make: Leaving directory `/root/Desktop/SkyEye-CDROM/SkyEye/skyeye/skyeye/sim/arm'
make: *** 错误2
make: Leaving directory `/root/Desktop/SkyEye-CDROM/SkyEye/skyeye/skyeye/sim'make: *** 错误1
# make
make: Entering directory `/root/Desktop/SkyEye-CDROM/SkyEye/skyeye/skyeye/sim'
make: Entering directory `/root/Desktop/SkyEye-CDROM/SkyEye/skyeye/skyeye/sim/common'
make: *** 没有指明目标并且找不到makefile. 停止
make: Leaving directory `/root/Desktop/SkyEye-CDROM/SkyEye/skyeye/skyeye/sim/common'
make: Entering directory `/root/Desktop/SkyEye-CDROM/SkyEye/skyeye/skyeye/sim/arm'
make: *** 没有指明目标并且找不到makefile. 停止
make: Leaving directory `/root/Desktop/SkyEye-CDROM/SkyEye/skyeye/skyeye/sim/arm'
make: *** 错误 2
make: Leaving directory `/root/Desktop/SkyEye-CDROM/SkyEye/skyeye/skyeye/sim'make: *** [all-sim错误 错误 2
可不可以具体地说一下整个安装过程?万分感谢!
页:
[1]